Instruction d'utilisation Dixon PERSONAL LIFT 3302

Résumé du contenu de la page N° 1

DIXON INDUSTRIES, INC. A
BLOUNT COMPANY AIRPORT

INDUSTRIAL PARK
PO BOX 1569
COFFEYVILLE KS 673370945
316251 2000
FAX 316 251 4117



TECHNICAL DATA
ZTR Model 3302
IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATING OR MAKING ADJUSTMENTS
SEAT ADJUSTMENT
1. Pull or lift body retention latch P/N 3954
from transaxle backing plate, raise and
push body and seat assembly forward.
2. Loosen four seat bolts, P/N 3227 and
slide seat forward or backward to
desired position.
3

Résumé du contenu de la page N° 2

REMOVING THE BODY 1. The 3302 has a two -piece polyethylene body. The upper body can be folded forward to expose the transaxle. In some cases, it may be necessary to remove the upper body to service the transaxle. 2. To remove upper body, remove two bolts P/N 3093 from the front of upper body hinge located on the brake shaft P/N 9283. Disconnect seat switch P/N 4761 at plug -in. 3. Reverse above procedure to reinstall. ADJUSTMENT OF MOWER DECK DRIVE BELT 1. This mower deck drive be

Résumé du contenu de la page N° 3

MOWER BLADE OPERATION To engage mower blades, turn engagement lever on floor slowly to the "ON" position. To Disengage mower blades, turn lever slowly to the "OFF" position. SAFETY CHECKS IMPORTANT- PERFORM SAFETY CHECKS AFTER MAKING ANY REPAIRS OR ADJUSTMENTS 1. After reassembly, while seated on mower, attempt to start engine with mower deck engaged. Engine should not start. If engine does start, return the mower to an Authorized Dixon dealer for adjustment or repair. 2. Disengage

Résumé du contenu de la page N° 4

Page 4 of 8 3302 BODY ASSEMBLY

Résumé du contenu de la page N° 5

Page 5 of 8 3302 CHASSIS ASSEMBLY

Résumé du contenu de la page N° 6

Page 6 of 8 3302 TRANSAXLE ASSEMBLY

Résumé du contenu de la page N° 7

Page 7 of 8 3302 MOWER DECK ASSEMBLY 30"

Résumé du contenu de la page N° 8

Page 8 of 8 3302 WIRING ASSEMBLY