Résumé du contenu de la page N° 1
MODEL W1815
1 5 " D i S c S A N D E R W i t h
B RA k E
OWNER'S MANUAL
(FOR MODELS MANUFACTURED SINCE 10/10)
Phone: (360) 734-3482 • Online t echnical Support: tech-support@shopfox.biz
c OPYR i G ht © NOVEMBER, 2010 BY WOODS t O ck i N t ERNA ti ONAL, i N c .
WARN i NG: NO POR ti ON OF thi S MANUAL MAY BE REPRODU c ED i N ANY S h APE OR FORM W ith OU t
th E WR itt EN APPROVAL OF WOODS t O ck i N t ERNA ti ONAL, i N c .
#
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
INTRODUCTION SAFETY ELECTRICAL SET UP OPERATIONS MAINTENANCE SERVICE PARTS Contents INTRODUCTION .....................................2 ACCESSORIES ...................................... 20 Woodstock Technical Support ..................2 MAINTENANCE .................................... 21 Machine Description .............................2 Schedule ......................................... 21 Machine Specifications ..........................3 Cleaning ......................................... 21
Résumé du contenu de la page N° 4
Model W1815 (Mfg. Since 10/10) INTRODUCTION Woodstock Technical Support This machine has been specially designed to provide many years of trouble-free service. Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation. Woodstock International, Inc. is committed to customer satisfaction. Our intent with this manual is to include the basic information for safety, setup, operation, maintenance, and service of this product. We stand beh
Résumé du contenu de la page N° 5
INTRODUCTION Model W1815 (Mfg. Since 10/10) © Woodstock International, Inc. • Phone #: (360) 734-3482 • Web: www.shopfox.biz Required Power Source ............................................................................... 220V, 1-Phase, 60 Hz Switch ....................................................................................... Paddle Switch w/Disabling Key Switch Voltage ......................................................................................................
Résumé du contenu de la page N° 6
Model W1815 (Mfg. Since 10/10) Type ..............................................................................................................Carboard Content ...........................................................................................................Machine Weight............................................................................................................. 149 lbs. Length ......................................................................................
Résumé du contenu de la page N° 7
INTRODUCTION Model W1815 (Mfg. Since 10/10) Controls and Features Cast Iron Disc (Sanding Disc Disc Guard Motor Attached) Work Table Miter Gauge On/Off Switch Cabinet Lock Handle (One of Two) Tilt Scale Door Figure 1. Identification. -5-
Résumé du contenu de la page N° 8
Model W1815 (Mfg. Since 10/10) S AFETY For Your Own Safety, Read Manual Before Operating Machine
Résumé du contenu de la page N° 9
SAFETY Model W1815 (Mfg. Since 10/10) Untrained operators Unexpected movement during can be seriously hurt by machinery. Only operations greatly increases the risk of injury allow trained or properly supervised people and loss of control. Verify machines are to use machine. When machine is not being stable/secure and mobile bases (if used) are used, disconnect power, remove switch keys, locked before starting. or lock-out machine to prevent unauthorized use—especially around children. M
Résumé du contenu de la page N° 10
Model W1815 (Mfg. Since 10/10) Additional Safety for Disc Sanders AVOID FINGER INJURIES. Never purposely POSITION TABLE CORRECTLY. Make sure the touch the moving sanding disc. Take care to gap between the table and sanding disc does 3 keep fingers away from sanding disc during not exceed ⁄16"—too large of a gap increases operations. If the workpiece is small or the risk of workpiece grab and pinch injuries, difficult to hold, use a workpiece holding while too small of a gap increases the ris
Résumé du contenu de la page N° 11
ELECTRICAL Model W1815 (Mfg. Since 10/10) ELECTRICAL Circuit Requirements This machine must be connected to the correct size and type of power supply circuit, or fire or electrical damage may occur. Read through this section to determine if an adequate power supply circuit is available. If a correct circuit is not available, a qualified electrician MUST install one before you can connect the machine to power. A power supply circuit includes all electrical equip
Résumé du contenu de la page N° 12
Model W1815 (Mfg. Since 10/10) Grounding Requirements This machine MUST be grounded. In the event of certain types of malfunctions or breakdowns, grounding provides a path of least resistance for electric current to travel—in order to reduce the risk of electric shock. Improper connection of the equipment-grounding wire will increase the risk of electric shock. The wire with green insulation (with/without yellow stripes) is the equipment- GROUNDED grounding wir
Résumé du contenu de la page N° 13
SETUP Model W1815 (Mfg. Since 10/10) SETUP Unpacking This machine has been carefully packaged for safe transportation. If you notice the machine has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. Inventory The following is a description of the main components Immediately discard all plastic bags shipped with the Model W1815. Lay the components out and packing materials to eliminate a to inventory them. choking and suffocation hazard for childre
Résumé du contenu de la page N° 14
Model W1815 (Mfg. Since 10/10) Machine Placement Weight Load Physical Environment Refer to the Machine Specifications for the The physical environment where your machine is weight of your machine. Make sure that the operated is important for safe operation and the surface upon which the machine is placed will longevity of its components. For best results, bear the weight of the machine, additional operate this machine in a dry environment equipment that may be installed on the that is free f
Résumé du contenu de la page N° 15
SETUP Model W1815 (Mfg. Since 10/10) Cleaning Machine To prevent corrosion during shipment and storage of your Gasoline and petroleum machine, the factory has coated the bare metal surfaces products have low flash of your machine with a heavy-duty rust prevention points and can explode compound. or cause fire if used to clean machinery. Avoid If you are unprepared or impatient, this compound can using these products be difficult to remove. To ensure that the removal of this to clean m
Résumé du contenu de la page N° 16
Model W1815 (Mfg. Since 10/10) Assembly Before beginning assembly, refer to the inventory list and group all fasteners with their intended components. Doing this will make assembly easier. When assembling this machine, tighten fasteners using hand tools only. Be careful if using air or electric impact tools to assemble this machine because fasteners can easily be over- tightened, causing them to dig into the paint, and strip threads To assemble the cabinet and mount the sander, do these s
Résumé du contenu de la page N° 17
SETUP Model W1815 (Mfg. Since 10/10) 4. Invert the cabinet, thread the (4) hex nuts onto the feet, and install the feet into the base, as shown in Figure 8. 5. Adjust the feet to the same height, tighten the hex nuts against the cabinet base to lock the feet in place, then return the cabinet right side up. Figure 8. Foot installation. 6. With the help of another person, place the sanding unit onto the top of the cabinet, as shown in Figure 9, and fasten it to the cabinet using (4) M8-1.25
Résumé du contenu de la page N° 18
Model W1815 (Mfg. Since 10/10) Test Run Once assembly is complete, test run your machine to make sure it runs properly and is ready for regular operation. The test run consists of verifying the following: 1) The motor powers up and runs correctly, and 2) the safety disabling mechanism on the switch works correctly. Projectiles thrown from the machine If, during the test run, you cannot easily locate the source could cause serious eye injury. Wear of an unusual noise or vibration, stop us
Résumé du contenu de la page N° 19
OPERATIONS Model W1815 (Mfg. Since 10/10) OPERATIONS Operation Overview The purpose of this overview is to provide the novice machine operator with a basic understanding of how the machine is used during operation, so they can more easily understand the controls discussed later in this manual. Note: Due to the generic nature of this overview, it is not intended to be an instructional guide for performing actual machine operations. To learn more about specific operations, seek training from
Résumé du contenu de la page N° 20
Model W1815 (Mfg. Since 10/10) Attaching Sandpaper The Model W1815 sander accepts 15" diameter adhesive- backed sanding discs. These are available in a variety of grits. The sanding disc sticks to the surface of the cast iron disc platen, using the pressure-sensitive adhesive backing (PSA). The sandpaper can be replaced without removing either the table or the dust port. To attach sandpaper, do these steps: 1. DISCONNECT MACHINE FROM POWER! 2. Remove the safety guard, peel off the old sandp
