Instruction d'utilisation Vision Fitness X70

Résumé du contenu de la page N° 1

TOOLS & PARTS INCLUDED
6mm T-Shaped Wrench

13mm Wrench
10mm T-Shaped Wrench
Screwdriver
5mm T-Shaped Wrench
Assembly

17mm Wrench
Guide
PARTS BOX
Power Cord 8mm L-Shaped Wrench
Console Mast Bracket
Console Mast Cover
Accessory Tray
500 South CP Avenue • P.O. Box 280 • Lake Mills. WI 53551
Color-coded Hardware Bags
toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373
X70
Owner’s Guide
www.visionfitness.com
Assembly Guide
COMMERCIAL ELLIPTICAL TRAINERS
Warranty Card
2008 V

Résumé du contenu de la page N° 2

TOOLS & PARTS INCLUDED 6mm T-Shaped Wrench 13mm Wrench 10mm T-Shaped Wrench Screwdriver 5mm T-Shaped Wrench Assembly 17mm Wrench Guide PARTS BOX Power Cord 8mm L-Shaped Wrench Console Mast Bracket Console Mast Cover Accessory Tray 500 South CP Avenue • P.O. Box 280 • Lake Mills. WI 53551 Color-coded Hardware Bags toll free 800.335.4348 • phone 920.648.4090 • fax 920.648.3373 X70 Owner’s Guide www.visionfitness.com Assembly Guide COMMERCIAL ELLIPTICAL TRAINERS Warranty Card 2008 V

Résumé du contenu de la page N° 3

Console Mast STEP STEP 1 Console Back Cover 5 ORANGE BAG Console CONSOLE • Place the console mast boot on the • Remove the four mounting screws from the back of the console. Remove end of the console mast. the four console back cover screws. • Connect the wire tie that exits the Connect the wire harness and heart rate STEP 1 wires that come from the console mast bottom of the console mast to the wire into the plugs located in the back of the harness that sits in the bracket at the consol