Résumé du contenu de la page N° 1
USER’S MANUAL
SMOOTH CE 2.1E ELLIPTICAL TRAINER
MODEL NUMBER: CE 2.1E
USER WEIGHT LIMITATION: 300 lbs (135kg)
SERIAL NUMBER (found on frame):
Résumé du contenu de la page N° 2
2 CE 2.1E ELLIPTICAL TRAINER PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. • Use the treadmill only as described in this manual. • Place on a level surface, with 2 meters (6 feet) of clearance behind it.
Résumé du contenu de la page N° 3
3 CE 2.1E ELLIPTICAL TRAINER POWER REQUIREMENTS IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This treadmill can be seriously damaged by sudden voltage changes in your h
Résumé du contenu de la page N° 4
4 CE 2.1E ELLIPTICAL TRAINER PREASSEMBLY Open the boxes: You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be assembled properly. If you are missing any parts or have any assembly questions call the manufacturer. Gather your tools: Before starting the assembly of your unit, make sure that y
Résumé du contenu de la page N° 5
5 CE 2.1E ELLIPTICAL TRAINER HARDWARE COMPARISON CHART Hardware chart: For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help you identify those items that may be unfamiliar to you. NO. DESCRIPTION QTY. 105 30 30 x 91 x M14 Bolt 2 30 97 M8 x 60mm Allen Head 77 Bolt 2 78 M10 x 90mm Bolt 2 M8 x 80mm Allen Head 79 Bolt 2 78 88 M14 Nut 2 100 101 91 91 ID 8mm Curve Washer 2 97 M4 x 12mm Screw 8 79 98
Résumé du contenu de la page N° 6
6 CE 2.1E ELLIPTICAL TRAINER PARTS LIST No. Description Qty. Order No. No. Description Qty. Order No. CE2.1-001 CE2.1-030 1 Computer 1 30 20 x 91 x M14mm Bolt 2 CE2.1-002 CE2.1-031 2 Front Upright Frame 1 31 Bearing 6804zz 4 Side Upright Bottom Cover - CE2.1-003 CE2.1-032 3 1 32 Level Adjusters 2 Left Side Upright Bottom Cover - CE2.1-004 CE2.1-033 4 1 33 Pedal Arm - Left 1 Right CE2.1-005 CE2.1-034 5 Left Upright 1 34 Pedal Arm - Right 1 CE2.1-006 CE2.1-035 6 Right Upri
Résumé du contenu de la page N° 7
7 CE 2.1E ELLIPTICAL TRAINER PARTS LIST No. Description Qty. Order No. No. Description Qty. Order No. 59 Front Frame Cover - Upper 1 CE2.1-059 89 M10 Nylon Nut 2 CE2.1-089 60 Front Frame Cover - Lower 1 CE2.1-060 90 M12 Nut 1 CE2.1-090 61 Crank Disk Axle 1 CE2.1-061 91 ID 8mm Curve Washer 4 CE2.1-091 62 Crank Disk Support Bushing 2 CE2.1-062 92 10 x 22 x 2mm Washer 2 CE2.1-092 63 Bearing 6005zz 2 CE2.1-063 93 10 x 15 x 1.5mm 2 CE2.1-093 64 Bearing 6400zz 4 CE2.1-064 94 M4 x 40mm
Résumé du contenu de la page N° 8
8 CE 2.1E ELLIPTICAL TRAINER PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. 1 109 110 110 112 111 113 10 10 21 21 21 21 95 95 20 20 107 19 16 108 105 103 17 108 15 106 97 106 102 15 14 7 8 11 14 79 97 8 12 2 7 102 79 102 97 102 97 15 22 12 13 102 108 15 22 11 102 5 6 83 3 4 13 83 102 108 23 18 75 75 88 4 3 23 78 102 88 86 74 24 78 77 24 74 9 27 91 26 86 87 26 18 77 27 76 32 25 87 25 91 26 87 101 87 31 101 29 26 28 30 76 95 18 32
Résumé du contenu de la page N° 9
9 CE 2.1E ELLIPTICAL TRAINER PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. 87 41 45 42 58 43 52 100 44 59 94 49 50 74 85 60 99 65 47 93 110 92 84 46 90 82 74 51 95 70 55 55 48 85 62 63 50 49 74 95 64 51 95 80 56 57 96 71 66 63 61 84 74 53 54 62 80 89 69 81 67 66 68 74 95 95 68 81 96 67 85 85 95 73 95 96 95 95 72 85 95 95 www.smoothfitness.co.uk
Résumé du contenu de la page N° 10
10 CE 2.1E ELLIPTICAL TRAINER ASSEMBLY STEP 1: First make sure to connect the Wire Harness – Middle (103) and Wire Harness – Lower (104) as shown below. Attach the Front Upright Frame (2) to the Frame (99) and secure using two M10 x 90mm Bolts (78), two ID 10mm Curve Washers (101) and two M10 Nuts (98). NOTE: Make sure the wire is recessed into the frame, do not trap the wire. 2 78 99 98 www.smoothfitness.co.uk
Résumé du contenu de la page N° 11
11 CE 2.1E ELLIPTICAL TRAINER ASSEMBLY STEP 2: First make sure to connect the Wire Harness - Upper (109) with Wire Harness - Middle (103) and Hand Pulse Sensor Wire – Upper (110) with Hand Pulse Sensor Wire – Middle (108) as shown below. Attach the Computer (1) to the Front Upright Frame (2) using four M6 x 20mm Bolts (105). NOTE: Make sure all wires are recessed into the Console Housing, do not trap or pinch any of the wires. 1 105 2 www.smoothfitness.c
Résumé du contenu de la page N° 12
12 CE 2.1E ELLIPTICAL TRAINER ASSEMBLY STEP 3: Slide the Handlebar – Left (16) and Handlebar – Right (17) onto the Front Upright Frame (2). Connect the Hand Pulse Sensor Wire - Middle (108) with Hand Pulse Sensor Wire – Lower (106) as shown below. 108 106 17 16 2 www.smoothfitness.co.uk
Résumé du contenu de la page N° 13
13 CE 2.1E ELLIPTICAL TRAINER ASSEMBLY STEP 4: Attach the Left Upright (5) and Right Upright (6) to the Frame (99) and secure using two M8 x 60mm Allen Head Bolts (77), two ID 8mm Curve Washers (91) and two M8 x 80mm Allen Head Bolt (79). 79 2 5 91 77 www.smoothfitness.co.uk
Résumé du contenu de la page N° 14
14 CE 2.1E ELLIPTICAL TRAINER ASSEMBLY STEP 5: Slide the 20 x 91 x M14mm Bolt (30) through the Pedal Arm – Right (34) and Handlebar – Right (17) and secure with M14 Nut (88) as shown. A B 88 17 34 30 C www.smoothfitness.co.uk
Résumé du contenu de la page N° 15
15 CE 2.1E ELLIPTICAL TRAINER ASSEMBLY STEP 6: Slide the20 x 91 x M14mm Bolt (30) through the Pedal Arm – Left (33) and Handlebar – Left (16) and secure with M14 Nut (88) as shown. A C 30 33 16 88 B www.smoothfitness.co.uk
Résumé du contenu de la page N° 16
16 CE 2.1E ELLIPTICAL TRAINER ASSEMBLY STEP 7: Attach the Pedal Arm Front Pivot Cover (18) into the ends of the Handlebar – Right (17) and Pedal Arm – Right (34). Repeat the procedure on the Pedal Arm – Left (33) and Handlebar – Left (16). 33 17 18 18 18 34 18 16 www.smoothfitness.co.uk
Résumé du contenu de la page N° 17
17 CE 2.1E ELLIPTICAL TRAINER ASSEMBLY STEP 8: Attach the Front Frame Cover – Upper (59) and Front Frame Cover – Lower (60) to the Frame (99). Secure with Fixing Inserts (85) and M4 x 50mm Screw (100). NOTE: The Fixing Insert (85) has been pre-assembled to Front Frame Covers by factory. 99 59 85 60 www.smoothfitness.co.uk
Résumé du contenu de la page N° 18
18 CE 2.1E ELLIPTICAL TRAINER ASSEMBLY STEP 9: Attach the Handlebar Cover (13) to the front side of Handlebar – Right (17) and secure with four M4 x 15mm Screws (102). Then attach two Handlebar Inside Cover (14) from the back side of the Handlebar – Right (17) to the Handlebar Cover (13). Secure the Handlebar Inside Covers using four M4 x 12mm Screws (97). Repeat the procedure on the Handlebar – Left (16). 16 17 97 14 102 13 102 www.smoothfitness.co.uk
Résumé du contenu de la page N° 19
19 CE 2.1E ELLIPTICAL TRAINER ASSEMBLY STEP 10: Attach the Side Upright Bottom Cover - Left (3) and Side Upright Bottom Cover - Right (4) to Right Upright (6) using four M4 x 15mm Screw (102). Repeat this procedure on Left Upright (5) with Side Upright Bottom Cover - Left (3) and Side Upright Bottom Cover - Right (4). 6 5 4 3 4 3 www.smoothfitness.co.uk
Résumé du contenu de la page N° 20
20 CE 2.1E ELLIPTICAL TRAINER ASSEMBLY STEP 11: Attach the Side Upright Upper Cover - #1 (7) and Side Upright Upper Cover - #2 (8) to Right Upright (6) using one Fixing Insert (85) and four M4 x 15mm Screw (102). Repeat this procedure on Left Upright (5) with Side Upright Upper Cover - #1 (7) and Side Upright Upper Cover - #2 (8). NOTE: The Fixing Insert (85) has been pre-assembled onto Side Upright Upper Cover - #1 (7) by factory. Congratulation! Your CE 2.1 Elliptical Tr
