Résumé du contenu de la page N° 1
9101431701
»
CD-D4000@#
CD Duplicator
Professional
˛
OWNER’S MANUAL
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
Ü INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure
ÿ
that may be of sufficient magnitude to constitute a risk of electr
Résumé du contenu de la page N° 2
Important Safety Precautions IMPORTANT (for U.K. Customers) For U.S.A DO NOT cut off the mains plug from this TO THE USER equipment. This equipment has been tested and found to If the plug fitted is not suitable for the power points in your comply with the limits for a Class A digital home or the cable is too short to reach a power point, then device, pursuant to Part 15 of the FCC Rules. obtain an appropriate safety approved extension lead or These limits are des
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS CAUTION: "Note to CATV system installer: ÉRead all of these Instructions. This reminder is provided to call the CATV system installer’s attention ÉSave these Instructions for later use. to Section 820-40 of the NEC which provides guidelines for proper ÉFollow all Warnings and Instructions marked on the audio grounding and, in particular, specifies that the cable ground shall be con- equipment
Résumé du contenu de la page N° 4
1 - Introduction The TASCAM CD-D4000 MKII CD duplicator pro- 1 - Introduction vides you with a quick and simple method of copy- 1.1 Installing the CD-D4000 MKII .......... 4 ing your original audio material in CD format at 2 - Parts of the CD-D4000 MKII more than real-time speeds, using easily-obtainable, 1 Power switch ......................................... 5 low-cost CD-R media, with no auxiliary equipment 2 Display ................
Résumé du contenu de la page N° 5
2 - Parts of the CD-D4000 MKII The following refer to front panel items only. The no operation is in progress. The indicator on this only rear panel feature is the power cord, which drive shows when the disc is being accessed. should be plugged into a power supply that matches In the “Play audio” mode (see 7.1, "Play audio the voltage shown on the rear panel label. track"), a pre-recorded CD may be inserted into this drive, and played back, track by trac
Résumé du contenu de la page N° 6
3 - Care of CD-R media The Compact Disc medium is a robust medium, and Dirty discs may be cleaned using a soft dry cloth the discs can survive a good deal of physical abuse. and/or a commercial CD cleaning fluid or ethyl alco- However, there are precautions that you should take hol. Do not use thinner, gasoline, benzene or LP when handling CD-R discs which are different to cleaning fluid, as these will damage the disc. those you should take when handling ordinary CDs. If you are in any
Résumé du contenu de la page N° 7
4 - Basic operations 4.1 Power-up procedure 4.3 Power down When the unit is first powered up using the power Before powering down the unit, eject discs from both switch 1, it performs a self-check operation, and the drives (the eject mechanism requires power to work, screen shows the following: and so you will not be able to eject the discs once power is turned off). TASCAM CD-D4000 MK2 NOTE followed by: Do not turn off the CD-D4000 MKII while writing to the
Résumé du contenu de la page N° 8
5 - Disc copy NOTE You may find it useful to test the copy procedure You should own the copyright, or have obtained before committing yourself to an actual copy, how- the appropriate permission from the copyright ever. See 6, "Test before disc copy" for details. owner or the rightful licensor, your unauthorized recording, reproduction or distribution thereof, may NOTES result in severe civil and cri
Résumé du contenu de la page N° 9
5 - Disc copy While the slave disc is being checked, the words progress: Checking Media will appear on the screen. Writing While the master disc is being checked, the 7% words Checking Data will appear on the screen. 7 After the percentage counter goes over 99%, the CD-D4000 MKII “closes” the disc, and the If the CD-D4000 MKII does not detect any display shows: potential problems with the discs, copying will start. Copy 5 The first
Résumé du contenu de la page N° 10
7 - Compare CD-ROM This mode is used for comparing a CD-ROM which 7.1 Play audio track has just been duplicated using the copy mode. It can- not be used for audio CDs. Since it is impossible to make a bit-by-bit compari- 1 Press the MODE key until the display shows the son of audio CDs, this function is provided for you to following: “audition” a CD copy, using a pair of headphones connected to the MASTER or SLAVE
Résumé du contenu de la page N° 11
7 - Compare CD-ROM 6 Press the ENTER key from this screen to exit the NOTE audio play mode and return to the main mode If the copied CD contains audio errors, you selection screen. will be able to hear them, but no message will appear on the display. If a copied CD contains audible errors, you may want to consider re- recording at a lower speed, which will almost certainly reduce the error rate. 8 - Error messages No disc is shown if the MASTER
Résumé du contenu de la page N° 12
9 - Specifications a. Subject to appropriate copyright permission 9.1 Operational specifications being obtained Unit Professional CD and CD-ROM duplicator 9.2 Physical specifications Types of media that may CD-DA (audio CDs) and CD-ROM a (ISO9660 standard, etc.) be copied Dimensions (w x h x d) 482 x 104.5 x 288 mm (19 x 4.1 x 11.3 in.) Maximum write speed 8 times Weight 6.3 kg (13.9 lbs) Other speeds 6 times, 4 times, 2 times, real-time Voltage requiremen
