Résumé du contenu de la page N° 5
Water Pressure A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber. Reverse Osmosis Water Supply IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and 827 kPa). Electrical Shock Hazard If a reverse osmo
Résumé du contenu de la page N° 6
_ _,_ _ _. ,_,.v • ,_ _ 'F'_' _ _ _ _:÷_ Gather the required tools and parts before starting installation. TOOLS NEEDED: 1/4"hex-head socket wrench, %6" hex-head socket wrench and a flat-blade screwdriver. IMPORTANT: Before you begin, turn the refrigerator control OFF.Unplug refrigerator or disconnect power. Remove food and any adjustable door or utility bins from doors. NOTE: To get your product through the doorway of your home, measure the doorway to see if you need to remove the door handles
Résumé du contenu de la page N° 7
g. Remove top right hinge cover and screws as shown. See Remove the Handles (optional) Graphic 7. IMPORTANT: Do not remove screw A. Style 1 10. Lift the refrigerator door straight up off bottom hinge. 1. Apply firm pressure with your hand on the face of trim. Slide 11. It may not be necessary to remove the bottom hinges to top trim up and bottom trim down away from handle. Lift trim move the refrigerator through a doorway. Both bottom hinges pieces off shoulder screws. See Graphic 1. have simila
Résumé du contenu de la page N° 8
6. Fasten the shutoff valve to the cold water pipe with the pipe AligntheDoors clamp. Be sure the outlet end is solidly in the 1/4"(6.35 mm) drilled hole in the water pipe and that the washer is under the IMPORTANT: First level the back of the refrigerator as described pipe clamp. Tighten the packing nut. Tighten the pipe clamp in "Door Closing." screws slowly and evenly so the washer makes a watertight seal. Do not overtighten or you may crush the copper tubing. The doors may be uneven after le
Résumé du contenu de la page N° 9
4. Turn shutoff valve ON. NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten. 5. Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak. Complete the Installation A B C D E F G A. Refrigerator water tubing E. Ferrule (purchased) B. Nut (provided) F Nut (purchased) C.Bulb G. Household water line D. Coupfing (purchased) 4. Turn shutoff valve ON. Electrical Shock Hazard 5. Check for leaks. Tighten any nuts or conn
Résumé du contenu de la page N° 10
Do not block any of these vents with food such as soda, cereal, bread, etc. If the vents are blocked, airflow will be obstructed and temperature and moisture problems may occur. Your new refrigerator may make sounds that your old one didn't IMPORTANT: Because air circulates between both sections, any make. Because the sounds are new to you, you might be odors formed in one section will transfer to the other. You must concerned about them. Most of the new sounds are normal. Hard thoroughly clean
Résumé du contenu de la page N° 11
• Press the ACCELER ICE button to turn on the feature. The Adjusting the Controls display screen indicates whether the feature is on or off. To adjust the set points, press and hold the TEMP button for 3 seconds. When adjust mode is activated, set points and adjusting information will appear on the display screen. ON OFF RECOMMENDED (O'F) FREEZER REFRIGERATOR(37F) RECOMMENDED_ The Accelerated Ice setting will remain on for 24 hours unless ,-,OF 3",°F U - manually turned off. The display will con
Résumé du contenu de la page N° 12
_ile_' _,_¢s _ o_:s__ e_y_5_,_,sJJ,,_,:_ (o_,,so "_}es,s'_odes} Depending on your model, you may have one or more of the When changing from crushed to cubed, a few ounces of crushed following options: the ability to select either crushed or cubed ice will be dispensed along with the first cubes. ice, a special light that turns on when you use the dispenser, or a To Dispense Ice: lock option to avoid unintentional dispensing. 1. Press the button to select the desired type of ice. The Water Dispen
Résumé du contenu de la page N° 13
• Press andholdLOCK for3seconds tolockthedispenser. • Press andholdLOCK asecond timetounlock thedispenser. Thedisplay screen indicates when thedispenser islocked. locked unlocked LOCKED UNLOCKED The water filter status light will help you know when to change your water filter. When the water filter status display changes from "GOOD" to "ORDER," this tells you that it is almost time to change the water filter cartridge. Replace the water filter A. Eject button cartridge when the water filter stat
Résumé du contenu de la page N° 14
Flushing the Water System After Changing Filter Removing and Replacing the Storage Bin After connecting the refrigerator to a water source, flush the 1. Hold the base of the storage bin with both hands and press water system. Use a sturdy container to depress and hold the the release button to lift the storage bin up and out. water dispenser lever for 5 seconds, then release it for NOTE: It is not necessary to turn the ice maker control to the 5 seconds. Repeat until water begins to flow. Once w
Résumé du contenu de la page N° 15
Your model may have glass or wire shelves. Store similar foods The deli drawer stores raisins, nuts, spreads, and other small together and adjust the shelves to fit different heights. This items at normal refrigerator temperatures. reduces the time the refrigerator door is open and saves energy. To Remove and Replace the Deli Drawer: 1. Remove the deli drawer by sliding it straight out to the stop. Slide-Out Shelves (on some models) Lift the front and slide the drawer out the rest of the way. 2.
Résumé du contenu de la page N° 16
Adjusting the Control Wne CasiB e _i}Jnsome modes ,_- A4scesso_i The convertible control comes preset at the lowest meat setting. To Remove and Replace the Wine Rack (left) or Can/Bottle To change a control setting: Move the control to the right Rack (right): (colder) or to the left (less cold) as desired. 1. Remove the rack by pulling it straight out from the shelf. To store vegetables: Set the control to VEG (all the way to the left) to store vegetables at their optimal storage temperatures 2.
Résumé du contenu de la page N° 17
,__ s_ _ _e " s__ _ B _........ _"_ _° • The freezer basket or bin can be used to store bags of frozen 3. Replace the basket or bin by positioning it on the rails. Lift the fruits and vegetables that may slide off freezer shelves, basket or bin front slightly while pushing it in fully past the To Remove and Replace the Freezer Basket or Bin: stops. 1. Remove the basket or bin by sliding it out to the stop. 2. Lift the front to slide the basket or bin out the rest of the way. DOOR FEATURES Your m
Résumé du contenu de la page N° 18
To Remove and Replace the Bin Parts: Drop-In Door Rails 1. Press either release button to open the tilt-out portion of the bin. To Remove and Replace the Rails: A 1. Remove the rails by pulling straight up on each end of the rail. I I 2. Replace the rails by sliding the shelf rail into the slots on the door and pushing the rail straight down until it stops. '_ @s. A. Release buttons ©oo Bns 2. To remove the tilt-out portion of the bin, press in on the curved levers on each side of the bin. Pull
Résumé du contenu de la page N° 19
REFRIGERATOR CARE Stainless steel finish: Wash with a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Dry thoroughly with a soft cloth. To keep your stainless steel refrigerator looking like new and to remove minor scuffs or marks, it is suggested that you use the manufacturer's approved Stainless Steel Cleaner and Polish. To order the cleaner, see "Accessories." IMPORTANT: This cleaner is for stainless steel parts only! Do not allow the Stai
Résumé du contenu de la page N° 20
Upper Freezer Light • Remove the light shield by squeezing the sides of the light Vacations shield in toward the center while pulling the shield forward as shown. If You Choose to Leave the Refrigerator On While You're • Replace the light shield by fitting the tabs into the slotted Away: holes in the freezer liner. Push in the shield until it snaps into 1. Use up any perishables and freeze other items. place. 2. If your refrigerator has an automatic ice maker: • Raise wire shutoff arm to OFF (up
