Résumé du contenu de la page N° 1
®
GE Monogram
42" Built-In Refrigerators
Custom
Options Guide
and
Installation
Instructions
With Custom Panel Dimensions
and Trim Kit
Installation Instructions
Models:
These Monogram built-in refrigerators are
ZIS42N
designed to be customized with decorator
door and grille panels. Field installed
ZISW42D
panels are required.
ZISB42D
Factory installed trim will accommodate
1/4" thick custom panels or optional
®
Lexan and Stainless Steel panel kits.
Optional trim kits allow an even broader
range o
Résumé du contenu de la page N° 2
Before you begin - Read these instructions completely and carefully. IMPORTANT - Save these instructions for local inspector’s use. IMPORTANT - OBSERVE ALL GOVERNING CODES AND ORDINANCES. Note to Installer - Be sure to leave these instructions with the Consumer. Note to Consumer - Keep these instructions with your Use and Care Book for future reference. This appliance must be properly grounded. See “Grounding the Refrigerator,” page 15. WARNING Cet appareil doit être correctement mis à la terre
Résumé du contenu de la page N° 3
DESIGN INFORMATION Design Information 42" Built-In Refrigerator Advance Planning Flush or Semi-Flush Enclosure Installations 3/4" 0" True Flush Installation Semi-Flush Installation In a flush installation, These refrigerators the refrigerator doors can also be installed will align evenly with the semi-flush into an enclosure front face of adjacent cabinet using the minimum cutout doors. The refrigerator blends width. The case trim creates a into the surrounding cabinetry. frame around the
Résumé du contenu de la page N° 4
Design Information 42" Built-In Refrigerators Installation Examples Side panels are required whenever the sides of the refrigera- Therefore, the rough-in dimensions must allow for side panel tor will be exposed. thickness. In both a flush and semi-flush installation, the finished dimension, (the width of the opening after side panels 1/2" to 3/4" side panels are normally set into place and are installed), must accommodate the full width of the fastened to adjacent cabinetry or to the back wall b
Résumé du contenu de la page N° 5
DESIGN INFORMATION Design Information 42" Built-In Refrigerator Advance These refrigerators are designed to be customized with You should: planning decorator door and grille panels. Field installed custom 1. Select the appearance option. exterior door and grille panels are required. 2. Order the trim kit(s) for that option. appearance 3. Order the custom door and grille panels from the Factory installed trim accommodates 1/4" thick custom options cabinet manufacturer. The exact dimension for eac
Résumé du contenu de la page N° 6
Custom Panel Dimensions 42" Built-In Refrigerator Front View ZIS42N (not to scale) (Non-dispenser) Side View (not to scale) 41" Case Width 24 3/4" Design Information 42" Overall Width Cutout dimensions, clearances and side panel sizes are 12 1/4" max determined by the many installation options available. 10-3/4" min Side panels must be used whenever the sides of the refrigerator will be exposed. Side panels are not required when refrigerator is installed into an enclosure or between pantry and o
Résumé du contenu de la page N° 7
CUSTOM PANEL DIMENSIONS Custom Panel Dimensions 42" Built-In Refrigerator Custom Door Panel Dimensions Using Standard Trim ZIS42N (non-dispenser) 1/4" thick panels Standard Trim with 1/4" Panels or • 1/4" Panels: Cut panels to size. Panels secured to 1/4" thick backing • Custom handles with 1/4" door panels require Trim Kit ZKH1 (or ZKHSS1 for tubular-stainless steel handles). Freezer Panel Fresh Food Panel Standard Trim with Panels secured to 1/4" thick backing • Applying a raised panel design
Résumé du contenu de la page N° 8
Custom Panel Dimensions 42" Built-In Refrigerator Custom Door Panel Dimensions ZIS42N (non-dispenser) Using Trim Kit ZKT42 • The ZKT42 trim kit provides for the installation of 3/4" 3/4" thick panel with standard handle custom door and grille panels, using the standard full- length handle. Cut panels to size and install. Freezer Panel Fresh Food Panel 67 15/16" 15 1/16" 25 1/16" Important: Maximum weight for fresh food panels is 50 pounds and 30 pounds for freezer door panels. Custom Grille Pane
Résumé du contenu de la page N° 9
CUSTOM PANEL DIMENSIONS Custom Panel Dimensions 42" Built-In Refrigerator Custom Door Panel Dimensions ZIS42N (non-dispenser) Using Trim Kits ZKT42 • ZKT42 and ZKHT1 installed together provides for the 3/4" thick panel installation of 3/4" custom door and grille panels, with custom handle using a custom handle, of your choice. Order ZKHTSS1 for tubular stainless-steel handles. Cut Freezer Panel Fresh Food Panel panels to size, rout the handle side of the panels as shown below and install. Import
Résumé du contenu de la page N° 10
Custom Panel Dimensions 42" Built-In Refrigerator ZISW42D (white dispenser) ZISB42D (black dispenser) Front View (not to scale) Side View Design Information (not to scale) 41" Case Width Cutout dimensions, clearances and side panel sizes are 24 3/4" 42" Overall Width determined by the many installation options available. Side panels must be used whenever the sides of the refrigerator 12 1/4" max will be exposed. Side panels are not required when 10-3/4" min refrigerator is installed into an encl
Résumé du contenu de la page N° 11
CUSTOM PANEL DIMENSIONS Custom Panel Dimensions 42" Built-In Refrigerator Custom Door Panel Dimensions Using Standard Trim ZISW42D (white dispenser) 1/4" thick panels ZISB42D (black dispenser) or Standard Trim with 1/4" Panels Panels secured to 1/4" thick backing • 1/4" Panels: Cut panels to size. • Custom handles with 1/4" door panels require Trim Kit ZKH1. When using ZKH1 with the standard dispenser Freezer Panel Freezer Panel Standard Custom trim, the length of the custom handle, top to botto
Résumé du contenu de la page N° 12
Custom Panel Dimensions 42" Built-In Refrigerator Custom Door Panel Dimensions ZISW42D (white dispenser) Using Trim Kit ZKT42 ZISB42D (black dispenser) 3/4" thick panel with standard handle • The ZKT42 trim kit provides for the installation of 3/4" and/or ZWCD1 custom collar trim custom door and grille panels, using the standard full- length handle. Cut panels to size and install. • For standard dispenser trim: Cut panels to size, rout the Freezer Panel Freezer Panel bottom of the upper freezer
Résumé du contenu de la page N° 13
CUSTOM PANEL DIMENSIONS Custom Panel Dimensions 42" Built-In Refrigerator Custom Door Panel Dimensions ZISW42D (white dispenser) Using Trim Kit ZKT42 ZISB42D (black dispenser) 3/4" thick panel with custom handle • ZKT42 and ZKHT1 installed together provides for the and/or ZWCD1 custom collar trim installation of 3/4" custom door and grille panels, using a custom handle of your choice. Cut panels to size, rout the handle side of the panels as shown below and install Freezer Panel Freezer Panel (s
Résumé du contenu de la page N° 14
Custom Panel Dimensions 42" Built-In Refrigerator For All Monogram Built-In Refrigerators Side Panel or Filler Options (not to scale) Side panels must be used whenever the sides of the refrigerator will be exposed. 1/2" to 3/4" Side Panels 24 3/4" Leading Edge 23 9/16" Flush with Cabinet Front. The front or 1/4" Side Panels Insert end of leading edge, must be side panel into trim. finished to match cabinetry Top View Top View 84" 84" Trim 3 3/4" Standard 4" high toekick or trim to fit. 2 9/16" H
Résumé du contenu de la page N° 15
PRODUCT INSTALLATION Installation 42" Built-In Refrigerator • Tinsnips to cut banding • Bucket • 7/16" open-end wrench • Drill and appropriate Tools Required • Stepladder • Level • #2 Phillips screwdriver bits • 1-1/2" open-end wrench • Appliance Hand Truck • Stubby Phillips • 7/16" socket with 3" • Tubing cutter screwdriver extension for ratchet • Safety glasses Hardware • Special velcro adhesive • 1/4-1/4 union with nuts Supplied strips for 1/4" side • 1/4" panel foam spacers panels Materials
Résumé du contenu de la page N° 16
Installation 42" Built-In Refrigerator Step 1 CAUTION Remove Packaging Refrigerator is much heavier at the top than at the bottom – be careful when moving. When using a hand truck, handle from side only. PRUDENCE Le réfrigérateur est beaucoup plus lourd en haut qu'en bas. Il faut être prudent lors des déplacements. Si un diable est utilisé, il faut soulever le réfrigérateur sur le côté seulement. • Remove outer carton. – Carefully cut banding at the top and bottom. • Slide out back corner posts
Résumé du contenu de la page N° 17
PRODUCT PRODUCT INSTALLATION INSTALLATION Installation 42" Built-In Refrigerator Step 2A WARNING ATTENTION For Installations With A Reverse When connecting a GE Reverse Lors du raccordement au réfrigérateur Osmosis System Osmosis Water System to your du système GE de purification de l’eau Rotate Only refrigerator, the only approved par osmose inversé seule l’installation Clockwise installation is with a GE RVKIT. To Remove avec un ensemble GE RVKIT est approuvée. Skip This If the water supply to
Résumé du contenu de la page N° 18
Installation 42" Built-In Refrigerator Step 4 • Gently push refrigerator into opening with hands Roll Refrigerator against front corners. The cardboard protective pad Into Opening should be beneath the refrigerator. • Roll refrigerator into the opening until it is flush with adjacent cabinets. Step 5 All models have 4-point leveling. The front is supported Level by leveling legs, the rear is supported by wheels. Refrigerator • To level the back of the refrigerator, turn the 7/16" hex Hex Nut Adj
Résumé du contenu de la page N° 19
PRODUCT INSTALLATION Installation 42" Built-In Refrigerator Step 7 Soffit OPTION 1 WARNING Block Secure ANTI-TIP PRECAUTIONS refrigerator The refrigerator is heavy at the top and must be at the top secured to prevent the possibility of tipping forward. ATTENTION PRECAUTIONS CONTRE LES BASCULEMENTS Le réfrigérateur est beaucoup plus lourd en haut et il faut le maintenir en place pour éviter la possibilité de son basculement vers l'avant. To prevent the refrigerator from tipping over, you must: •
Résumé du contenu de la page N° 20
Installation 42" Built-In Refrigerator Step 9 • Connect refrigerator power cord plug to properly Connect grounded receptacle, accessible through the top right power side of the grille opening. • Check to make sure power to refrigerator is on by opening refrigerator door to see if interior lights are on. Step 10 If you are using 3/4" thick custom panels, SKIP THIS Mount STEP. See Custom Panel Dimensions for grille panel Top Grille sizes. Order ZKT42 kit and follow the installation Screws Panel i
