Résumé du contenu de la page N° 1
Installation instructions
and user guide
Ice & Water refrigerator
E402B, E442B, E522B, RF610A, RF540A, RF201A models
NZ AU GB AE HK SG IE
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
1 Contents Introduction 2 Safety and warnings 3 Installation instructions 5 Before you start using your Ice & Water refrigerator 15 All about the display 16 Using your water dispenser 18 Using your ice maker 19 Using the display options 21 Measured Fill 21 Freezer Chill and Bottle Chill 22 The temperature of your refrigerator and freezer 23 Settings/User warnings 24 Active Smart™ special features 26 Water filter 28 Measured Fill Calibration 30 Active Smart™ maintenance 31 Cleaning and caring for
Résumé du contenu de la page N° 4
2 Introduction Thank you for buying a Fisher & Paykel Active Smart™ refrigerator with automatic ice dispensing and chilled water through the door. At Fisher & Paykel we are very proud of this refrigerator. We feel we have achieved water dispensing through the door without compromising storage space or access in the refrigerator. During our testing we have enjoyed the health benefits of having cool filtered water so accessible, while minimising the number of door openings. Thousands of hours
Résumé du contenu de la page N° 5
3 Safety and warnings WARNING! Electric Shock Hazard Read and follow the SAFETY AND WARNINGS outlined in this User Guide before operating this appliance. Failure to do so can result in death, electric shock, fire or injury to persons. Use this appliance only for its intended purpose as described in this User Guide. Important safety precautions Warning When using this appliance always exercise basic safety precautions including the following: Danger This appliance is not intended for use by
Résumé du contenu de la page N° 6
4 Safety and warnings When moving your appliance away from the wall, be careful not to roll over or damage the power cord. Unplug your refrigerator or freezer before cleaning or replacing the lightbulb. Storing food and drinks Never store volatile or flammable materials in your refrigerator or freezer as they may explode. Never freeze liquids in glass containers. Liquid expands during freezing, which may cause the container to explode. Never freeze carbonated drinks. They may explode
Résumé du contenu de la page N° 7
5 Installation instructions Contents of filter kit 1 4 m (13 ft) white 6 mm (¼”) tubing 2 1 x 200 mm (8”) blue tubing 3 1 x pressure reducing valve (PRV) 4 1 x double sided foam 5 2 x locking keys 6 1 x water filter cartridge and head 7 1 x tap connection – 15 mm (½”) BSP 1234567 Fig.2 Water connection kit Important! It is imperative the pressure reducing valve (PRV) is fitted prior to the filter. This valve ensures the water will not flow back into the mains from the refrigerator water s
Résumé du contenu de la page N° 8
6 Installation instructions Installation instructions: 1 Ensure that refrigerator is not plugged into a power supply. 2 Locate isolation tap for water connection – cold water feed only (dishwasher or sink mixer taps) – if you can’t find the connection tap, contact an authorised plumber in your state Diagram 1 or town to fit your water connection. Fig.3 PRV connection 3 Connect the 200 mm (8”) blue tubing to the outlet of the PRV (blue collet) and the inlet connection of the water filter car
Résumé du contenu de la page N° 9
7 Installation instructions 11 Attach double sided foam to the back of the water filter head as shown in Diagram 5. Write the date to be replaced on the filter (date installed + 6 months). Remove double sided foam backing and attach filter to the desired position as located in step 10 (refer to previous page). 12 Run the 6 mm (¼”) tubing to back of the fridge ensuring there is enough tubing to pull out the refrigerator for service. 13 Connect tubing into the water (solenoid) valve located o
Résumé du contenu de la page N° 10
8 Installation instructions Important! All connections must be checked for leaks. If unsure of connection process and/or leaks then contact your local plumber to install and check the system for you. Ensure white 6 mm (¼”) tubing is routed away from sharp objects, sharp corners (beware of kinking tube as this will stop water flow), clear of the refrigerator unit compartment and not in a location where it can be squashed. Ensure all push-fit connections are firmly pushed into place. Th
Résumé du contenu de la page N° 11
9 Installation instructions WARNING! Electric Shock Hazard Read and follow the SAFETY AND WARNINGS outlined in this User Guide before operating this appliance, pages 3 – 4. Failure to do so can result in death, electric shock, fire or injury to persons. Please follow the steps for installation to ensure your appliance operates correctly. 1. Power The appliance must be installed so the plug is accessible. To ensure that the appliance is not accidentally switched off, connect your refrigerat
Résumé du contenu de la page N° 12
10 Installation instructions E402B, E442B, E522B RF610A/RF540A/RF201A Flush with refrigerator chassis – full door rotation Flush with refrigerator chassis – full door rotation Flush with refrigerator door – 90˚ door rotation Flush with refrigerator door – 90˚ door rotation Flush with refrigerator door – full door rotation Flush with refrigerator door – full door rotation
Résumé du contenu de la page N° 13
11 Installation instructions 3. Ventilation and installation To ensure adequate ventilation for your refrigerator see recommended cabinetry dimensions below. The appliance is intended to be placed against a wall with a free distance not exceeding 75 mm. RF610A Cabinetry dimensions (mm) (including E402B E442B E522B RF540A minimum air clearances) RF201A A inside height 1745 1745 1745 1810 Flush with refrigerator chassis – full door rotation B inside width 675 720 830 940 C inside depth 620
Résumé du contenu de la page N° 14
12 Installation instructions 4. Installation Your Fisher & Paykel Active Smart™ refrigerator is fitted with front and rear rollers, designed for moving the product in the forwards and backwards direction. Raise the front of Avoid moving the product in a sideways direction the refrigerator as this may damage the rollers or the floor covering/ Lower the front of the refrigerator surface. Fig.10 Refrigerator feet A Your refrigerator will arrive with the front feet wound up making moving th
Résumé du contenu de la page N° 15
13 Installation instructions 6. What to do if your product is unstable E Gently push the refrigerator back until the rear rollers Example only contact floor. Measure the gap under the front foot, which has come off the floor. Obtain some solid packing material (hardwood, plastic etc) which fits firmly into the gap under the foot. Note: Do not use metallic materials that may corrode and stain or damage floor coverings. F Wind both front feet up and roll the product out of Un-level f
Résumé du contenu de la page N° 16
14 Installation instructions Before placing food in the fresh food or freezer compartments Remove all packaging. Ensure that all transit clips are removed from the refrigerator. These are small rubber stops located at the back of the shelves. Allow the refrigerator and freezer to run empty for 2 – 3 hours to allow each compartment to cool to the appropriate temperature. Clean the inside of the appliance with warm water and a little liquid detergent to remove manufacturing and transport
Résumé du contenu de la page N° 17
15 Before you start using your Ice & Water refrigerator Check refrigerator is switched on and has cooled for at least 2 hours (refer to page 23 – The temperature of your refrigerator and freezer) before use. Check that the water filter has been connected and turned on. Turn on ice maker (refer to page 19). At first use allow approximately 1 minute from when the dispensing pad is pushed until water is dispensed. This will allow the tank to fill. Run through and discard the first 3 L (
Résumé du contenu de la page N° 18
16 All about the display The display screen enables you to view and modify all the features and options on your fridge. For example, you can change the temperature in your fridge or freezer, and select the Freezer Chill function when you want to quickly freeze meat. You may want a measured amount of chilled water when you are cooking, or want to quickly chill a bottle of wine when friends arrive unexpectedly. 45 6 7 8 9 13 2 Fig.16 Electronic control panel Keys For more detailed information
Résumé du contenu de la page N° 19
17 All about the display Display features 4. Measured Fill (see page 21) A pre-measured volume of water can be selected and dispensed automatically. 5. Dispensing water (see page 18) Animation shows you water is being dispensed. 6. Chill (see pages 22 – 23) Freezer Chill When activated this feature boosts cooling in your freezer, optimising the rate at which your foods are frozen. Bottle Chill Your drinks can be chilled more rapidly using this function. An alarm will alert you when they are r
Résumé du contenu de la page N° 20
18 Using your water dispenser Dispensing pad Your water dispenser has been designed for one handed operation. Simply push your glass up against the dispenser pad found at the back of the dispenser area. This pad requires only a gentle press to activate. Please remember that pressing very hard against the dispensing pad will not make the dispenser operate faster or produce greater quantities of water. First use After installation, on the first use, allow approximately a one minute delay from
