Résumé du contenu de la page N° 1
DUAL DIN SIZED CD RECEIVER
DPX301
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on
Résumé du contenu de la page N° 2
Contents 2Warning 3 Menu system 20 Menu System Safety precautions 4 Activating Security Code Deactivating Security Code Notes 5 Touch Sensor Tone Manual Clock Adjustment About CDs 6 Display Illumination Control Dimmer About AAC, MP3 and WMA 7 Switching preout Built-in Amp Setting General features 8 Supreme Setting Power CRSC (Clean Reception System Circuit) Selecting the Source Receive mode Setting Volume SIRIUS ID (ESN) display Attenuator Auxiliary Input Display Setting System Q Text Scroll Aud
Résumé du contenu de la page N° 3
2Warning 2CAUTION NOTE Use of controls or adjustments or performance of This equipment has been tested and found to procedures other than those specified herein may comply with the limits for a Class B digital device, result in hazardous radiation exposure. pursuant to Part 15 of the FCC Rules. These limits In compliance with Federal Regulations, following are designed to provide reasonable protection are reproductions of labels on, or inside the product against harmful interference in a re
Résumé du contenu de la page N° 4
Safety precautions About CD players/disc changers 2WARNING connected to this unit To prevent injury or fire, take the Kenwood disc changers/ CD players released in following precautions: 1998 or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers/ inside the unit. CD players. • Mounting and wiring this product req
Résumé du contenu de la page N° 5
Résumé du contenu de la page N° 6
Résumé du contenu de la page N° 7
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following display limitation. The Audio file, which is not comforming File/Folder name: 64 characters to the specification, may not play normally, or the MP3 ID3 Tag/ WMA Contents property/ AAC song file and folder names may not display correctly. information: 30 characters Playable Audio file • AAC, MP3, WMA • File/Folder name is the number o
Résumé du contenu de la page N° 8
General features DISP VOL Control knob ATT Q SRC Clock display LOUD indicator ATT indicator Power Volume Turning ON the Power Increasing Volume Press the [SRC] button. Turn the [VOL] knob clockwise. Turning OFF the Power Decreasing Volume Press the [SRC] button for at least 1 second. Turn the [VOL] knob counterclockwise. Selecting the Source Attenuator Turning the volume down quickly. Press the [SRC] button. Press the [ATT] button. Source required Display Each time you press the button, the Atte
Résumé du contenu de la page N° 9
System Q Audio Control Selecting the best sound setting preset for 1 Select the source to adjust different types of music. Press the [SRC] button. 1 Select the source to set 2 Enter Audio Control mode Press the [SRC] button. Press the [VOL] knob. 2 Select the Sound type 3 Select the Basic Audio item to adjust Press the [Q] button. Press the [VOL] knob. When you press the button once, the current Each time you press the knob, the item to be sound setting is displayed. adjusted alternates betwe
Résumé du contenu de la page N° 10
General features Audio Setup Speaker Setting Setting the Sound system, such as Cross over Fine-tuning so that the System Q value is optimal Network. when setting the speaker type. 1 Select the source to adjust 1 Enter Standby Press the [SRC] button. Press the [SRC] button. Select the "STANDBY" display. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Audio Setup item to adjust Press the [VOL] knob. 3 Select the
Résumé du contenu de la page N° 11
In Standby/ Auxiliary input source Switching Display Information Display Changing the information displayed. Source name "SRC NAME" Press the [DISP] button. Clock "CLOCK" Each time the button is pressed, the display switches as shown below. In Tuner source • * If the contents of the information cannot be displayed, Play time or Frequency is displayed. Information Display • If the contents of the information for the SIRIUS Frequency "FREQ" tuner source cannot be displayed, channel number is
Résumé du contenu de la page N° 12
General features Subwoofer Output TEL Mute Turning the Subwoofer output ON or OFF. The audio system automatically mutes when a call comes in. Push the Control knob towards [AM] for at least 2 seconds. When a call comes in Each time you push the knob, Subwoofer output "CALL" is displayed. switches ON and OFF. The audio system pauses. When it is ON, "SW ON" is displayed. Listening to the audio during a call Press the [SRC] button. • You can control this function when
Résumé du contenu de la page N° 13
Résumé du contenu de la page N° 14
Tuner features Function of remote control Auto Memory Entry Direct Access Tuning Putting stations with good reception in the memory automatically. Entering the frequency and tuning. 1 Select the band for Auto Memory Entry 1 Select the band Push the Control knob towards [FM] or [AM]. Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode 2 Open Auto Memory Entry Press the [DIRECT] button on the remote Press the [AME] button for at least 2 seconds. control. "A-MEMORY" is displayed. "– –
Résumé du contenu de la page N° 15
Résumé du contenu de la page N° 16
CD/Audio file/External disc control features Function of disc changers with remote control Fast Forwarding and Reversing Direct Disc Search Fast Forwarding Doing Disc Search by entering the disc number. Hold down towards [¢] with the Control knob. 1 Enter the disc number Release your finger to play the disc at that point. Press the number buttons on the remote control. Reversing Hold down towards [4] with the Control 2 Do Disc Search knob. Press the [+] or [–] button. Release your finger to p
Résumé du contenu de la page N° 17
Résumé du contenu de la page N° 18
CD/Audio file/External disc control features Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob towards [FM] for at least 2 seconds. • When the (page 22) is set to OFF, the display may black out while scrolling. | 18 English
Résumé du contenu de la page N° 19
Résumé du contenu de la page N° 20
