Résumé du contenu de la page N° 1
AIR COMPRESSOR
Maintenance-free pump
Compresor de aire
La pompe sans entretien
Compresseur d’air
La bomba sin mantenimiento
Instruction manual
Manuel d'instructions
Manual de'instrucciones
Française : Page 21
Español: Página 42
www.deltaportercable.com
TO REDUCE THE RISK OF INJURY,
USER MUST READ INSTRUCTION
MANUAL BEFORE OPERATING PRODUCT.
PARA REDUCIR EL RIESGO
DE LESIONES, EL USUARIO
DEBE LEER EL MANUAL DE INSTRUCCIONES ANTES
DE OPERAR EL PRODUCTO
AFIN DE RÉDUIRE LE
RISQUE DE
BLESSURE
Résumé du contenu de la page N° 2
SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and under- stand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these symbols. Indicates an Indicates a potentially imminently hazardous hazardous situation situation which, if not avoided, will which, if not avoided, may result in result in deat
Résumé du contenu de la page N° 3
� If electrical sparks from com- � If spraying flammable materi- pressor come into contact with als, locate compressor at least flammable vapors, they may 20 feet (6.1 m) away from spray ignite, causing fire or explosion. area. An additional length of air hose may be required. � Store flammable materi- als in a secure location away from compressor. � Restricting any of the com- � Never place objects against pressor ventilation openings or on top of compressor. will cause serious overheat- �
Résumé du contenu de la page N° 4
HAZARD RISK OF BURSTING Air Tank: The air tank on your Air Compressor is designed and may be UM coded [for units with air tanks greater than 6" (152 mm)] according to ASME Section VIII, Div. 1 rules. All pressure vessels should be inspected once every two years. To find your state pressure vessels inspector, look under the Division of Labor and Industries in the government section of a phone book . The following conditions could lead to a weakening of the air tank, and result in a violent
Résumé du contenu de la page N° 5
HAZARD RISK OF ELECTRICAL SHOCK WHAT CAN HAPPEN HOW TO PREVENT IT � Your air compressor is pow- � Never operate the compres- ered by electricity. Like any sor outdoors when it is rain- other electrically powered ing or in wet conditions. device, If it is not used properly � Never operate compres- it may cause electric shock. sor with protective covers removed or damaged. � Repairs attempted by unqualified � Any electrical wiring or repairs personnel can result in serious required on this pro
Résumé du contenu de la page N° 6
HAZARD RISK OF HOT SURFACES WHAT CAN HAPPEN HOW TO PREVENT IT � Touching exposed metal such � Never touch any exposed metal as the compressor head, engine parts on compressor during or head, engine exhaust or outlet immediately after operation. tubes, can result in serious burns. Compressor will remain hot for several minutes after operation. � Do not reach around protective shrouds or attempt maintenance until unit has been allowed to cool. HAZARD RISK FROM MOVING PARTS WHAT CAN HAPPE
Résumé du contenu de la page N° 7
HAZARD RISK OF UNSAFE OPERATION WHAT CAN HAPPEN HOW TO PREVENT IT � Unsafe op er a tion of your air � Review and understand all compressor could lead to se ri ous instructions and warnings in ju ry or death to you or others. in this manual. � Be come fa mil iar with the op eration and con trols of the air compressor. � Keep operating area clear of all persons, pets, and obstacles. � Keep chil dren away from the air compressor at all times. � Do not operate the product when fatigued or und
Résumé du contenu de la page N° 8
SPECIFICATIONS Model No. C2006 Bore 1.875" Stroke 1.250" Voltage/Hz-Single Phase 120/60 Minimum Branch Circuit Requirement 15 amps Fuse Type Time Delay Air Tank Capacity (Gallon) 6 Approximate Cut-in Pressure 120 PSIG Approximate Cut-out Pressure 150 PSIG SCFM @ 40 PSIG *3.7 SCFM @ 90 PSIG *2.6 *Tested per ISO 1217 Refer to Glossary for abbreviations. GLOSSARY Become familiar with these terms before operating the unit. CFM: Cubic feet per minute. SCFM: Standard cubic feet per minute; a u
Résumé du contenu de la page N° 9
ASSEMBLY Unpacking 1. Remove unit from carton and discard all packaging. INSTALLATION HOW TO SET UP YOUR UNIT Location of the Air Compressor � Locate the air compressor in a clean, dry and well ventilated area. � The air compressor should be located at least 12" (30.5 cm) away from the wall or other obstructions that will interfere with the flow of air. � The air compressor pump and shroud are designed to allow for proper cooling. The ventilation openings on the compressor are necessary to
Résumé du contenu de la page N° 10
EXTENSION CORDS If an extension cord must be used, be sure it is: � a 3-wire extension cord that has a 3-blade grounding plug, and a 3-slot recep- tacle that will accept the plug on the product � in good condition � no longer than 50 feet � 14 gauge (AWG) or larger. (Wire size increases as gauge number decreases. 12 AWG and 10 AWG may also be used. DO NOT USE 16 OR 18 AWG.) The use of an undersized extension cord will cause voltage to drop resulting in power loss to the motor and overheat
Résumé du contenu de la page N° 11
OPERATION KNOW YOUR AIR COMPRESSOR READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future refer- ence. On(I)/Off(O) Switch Outlet Pressure Gauge Tank Pressure Gauge Quick Connect Safety Valve Regulator DESCRIPTION OF OPERATION Become familiar with these controls before operating the unit. On(I)/Off(O) Switch: Place this switch
Résumé du contenu de la page N° 12
Air Compressor Pump (not shown): Compresses air into the air tank. Working air is not available until the compressor has raised the air tank pressure above that required at the air outlet. Drain Valve: The drain valve is located at the base of the air tank and is used to drain condensation at the end of each use. Drain Check Valve: When the air compressor is operating, the Valve check valve is "open", allowing compressed air to enter the air tank. When the air compressor reaches "cut-ou
Résumé du contenu de la page N° 13
NOTE: The hose or accessory will require a quick connect plug if the air outlet is equipped with a quick connect socket. Risk of Bursting. Too much air pressure causes a hazardous risk of bursting. Check the manufacturer’s maximum pressure rating for air tools and accessories. The regulator outlet pressure must never exceed the maximum pressure rating. Risk of unsafe operation. Compressed air from the unit may contain wa ter condensation and oil mist. Do not spray un fil tered air at an it
Résumé du contenu de la page N° 14
TO DRAIN TANK Risk of Unsafe Operation. Risk from noise. Air tanks contain high pressure air. Keep face and other body parts away from outlet of drain. Use ANSI Z87.1 eye protection (CAN/CSA Z94.3) when draining as debris can be kicked up into face. Use ear protection [(ANSI S12.6 (S3.19) hearing protection] as air flow noise is loud when draining. 1. Set the On/Off switch to "Off". 2. Turn the regulator knob counter-clockwise to set the outlet pressure to zero. 3. Remove the air tool or acc
Résumé du contenu de la page N° 15
6. Apply sealant to the check valve threads. Reinstall the check valve (turn clock- wise). 7. Replace hose and new hose clamp. 8. Perform the Break-in Procedure. See "Break-in Procedure" in the Operation section. TO REPLACE REGULATOR 1. Release all air pressure from air tank. See "To Drain Tank" in the Maintenance section. 2. Unplug unit. 3. Using an adjustable wrench remove Gauges the gauges, quick connect, and safety valve from the regulator manifold. 4. Remove the hose by removing the h
Résumé du contenu de la page N° 16
STORAGE Before you store the air compressor, make sure you do the following: 1. Review the Maintenance section on the preceding pages and perform sched- uled maintenance as necessary. 2. Set the On/Off switch to "Off" and unplug unit. 3. Turn the regulator counterclockwise and set the outlet pressure to zero. 4. Remove the air tool or accessory. 5. Pull ring on safety valve allowing air to bleed from the tank until tank pressure is approximately 20 PSI. Release safety valve ring. 6. Drain wate
Résumé du contenu de la page N° 17
TROUBLESHOOTING Risk of Unsafe Operation. Unit cycles automatically when power is on. When servicing, you may be exposed to voltage sources, com- pressed air, or moving parts. Before servicing unit unplug or disconnect electrical supply to the air compressor, bleed tank of pressure, and allow the air compressor to cool. PROBLEM CAUSE CORRECTION Excessive tank pressure Pressure switch does Move On/Off lever to - safety valve pops off. not shut off motor when the "Off" position, if compress
Résumé du contenu de la page N° 18
PROBLEM CAUSE CORRECTION Pressure reading on It is normal for "some" If there is an excessive the regulated pressure pressure drop to occur. amount of pressure drop gauge drops when an when the accessory accessory is used. is used, adjust the regulator following the instructions in the "Description of Operation" paragraph in the Operation Section. NOTE: Adjust the regulated pressure under flow conditions (while accessory is being used). Compressor is not Prolonged excessive Decrease
Résumé du contenu de la page N° 19
PROBLEM CAUSE CORRECTION Motor will not run. Fuse blown, circuit Check fuse box breaker tripped. for blown fuse and replace as necessary. Reset circuit breaker. Do not use a fuse or circuit breaker with higher rating than that specified for your particular branch circuit. Check for proper fuse. You should use a time delay fuse. Check for low voltage problem. Check the extension cord. Disconnect the other electrical appliances from circuit or operate the compressor on its own bran
Résumé du contenu de la page N° 20
FULL ONE YEAR WARRANTY PORTER-CABLE industrial tools are warranted for one year from date of purchase. We will repair, without charge, any defects due to faulty materials or workmanship. For warranty repair information, call (888)-848-5175. This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces. LATIN AMERICA: This w
