Instruction d'utilisation Haier HWS60-50

Résumé du contenu de la page N° 1

Spin-dryer User's manual
This manual is for
HWS60-40
HWS60-50

Please read this manual
carefully before using.
Retain it for future reference.

Résumé du contenu de la page N° 2

Contents Pcking list The 2nd cover Specification The 2nd cover Names of the parts Safety precautions The musts in using Using sequence Trouble-Shooting *Answers to question Packing list ×°Ïä˵Ã÷ Name Quantity One piece User's manual One piece Warranty card One piece Water inlet hose One piece Gland Spin-drier One set Specification Injection pressure(MPa) 0.02 0.2 Rated spinning capacity kg 6.0

Résumé du contenu de la page N° 3

Names of the parts Cover of the spin tub Knob of spin timer Inner cover Panel support Water-filling entrance Control panel Power line Handle Spin tub Drain hose Back cover Cabinet Base frame Fixing leg (four pieces) Note:The figures in this manual can only be regarded as diagrammatic sketches. Please understand that, due to constant improvement of design, the extractor and its accessories that you have purchased may be inconsistent with these figures in the manu

Résumé du contenu de la page N° 4

Safety precautions When the machine is normally using, Please insert the power cord into special please put the power plug at the loc- receptacle with rated voltage.Be sure to ation easily to be inserted and extracted use single-phase three pins receptacle.If by hand. Be sure to pull the plug off when possible,please adopt electric leakage there's power failure, or the machine is protector. being moved, cleaned or when it is idle. Do not bend, stretch, twist, bind the power cord by forc

Résumé du contenu de la page N° 5

Safety precautions Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Do not put any hot or heavy items Do not wash laundries with volatile ( such as the kettle with hot water ) materials (such as thinner, petrol etc.). on the washing machine. Keep the machine away from direct Handicapped or chi

Résumé du contenu de la page N° 6

The musts in using Usage of the panel OFF OFF 5 1 10 2 4 2 8 4 3 6 SPIN TIMER WATER INLET SPIN TIMER Set the spinning duration Water-added rinsing- Set the spinning duration depending on the category spinning,to be used depending on the category and amount of the articles. during defoaming and amount of the articles. -spinning. To set to below 1 minute, first To set to below 2 minute, first set to 2 minute then turn it set to 4 minute then turn it back. it can increase the back. i

Résumé du contenu de la page N° 7

Spin process 1 Put the laundries in properly 2 Put the gland in properly 3 Close the inner and outer cover of the spin tub 4 Do you need water-added Rinsing-spinnning Water-added rinsing-spinning has an effect that can remove the surplus liquid dirt, It works in a way as follows: Foam-removing Spin spinning Spin for about 1~2 minutes Fill water for Spin for about Remove most of about 1 minutes 1~2 minutes the foam extra detergent liquid. Remove the detergent liquid remained Note: I

Résumé du contenu de la page N° 8

Disposal after spinning 1 Hang up the drain hose. 2 Pull off the power plug and hang up the power cord. 3 Wipe the complete unit with soft cloth twisted dry. 4 Open the inner/outer cover of the spin tub for some time (about one hour), then close them. Maintenance If the cabinet is dirty, wipe it with wet soft cloth 1 Wipe off the water drops on Do not wash it directly by water. the surface and inside the Wipe with neutral detergent if too dirty tub with clean soft cl