Instruction d'utilisation Badger Basket Wicker Doll Buggy 00569

Résumé du contenu de la page N° 1

WICKER DOLL BUGGY
Assembly Instructions. Adult Assembly
Required. Save these instructions for future
use. This item is a toy for dolls only.
For children ages (3) years and older.
PRODUCT MODEL
NUMBER:
00569
Actual product may vary slightly from shown.
Visit us online at www.badgerbasket.com
Toll-Free Customer Service: 1-800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST)
Web: http://www.badgerbasket.com/parts • E-mail: parts1@badgerbasket.com
PLANT AND GENERAL OFFICE: PO Box 227, Edgar, WI 54

Résumé du contenu de la page N° 2

PARTS AND HARDWARE: BEFORE YOU BEGIN ASSEMBLY: Check all parts and hardware listed. If anything is missing or you have questions, please DO NOT call the store or return the product to them. Contact us for assistance. Most problems are resolved without you needing to leave home. When emailing or calling us, please have this instruction manual and your product model number ready. For fastest service, go to http://www.badgerbasket.com/parts TOOLS NEEDED: Kx4 Philips Screwdriver Standard Screwdriver

Résumé du contenu de la page N° 3

NOTE: The “!” symbol indicates that this step is easier if you have another person assist you. STEP 1 - PICTURE 1: Attach the HANDLE (A) to the HANDLE FRAMES (B) using TWO SHORT SCREWS (C). ! - STEP 2 - PICTURE 2: Decide if you want the handle attached in front of the carriage or behind it (it can be removed and reattached, by an adult, in the other position at any time). Attach the TWO HANDLE FRAMES (B) to the WICKER BODY (D) using FOUR LONG BOLTS (E), FOUR WASHERS (F), and FOUR CAP NUTS (G). T

Résumé du contenu de la page N° 4

STEP 5 - PICTURE 5: Attach the FOUR WHEELS (K) to the AXLES (I). Squeeze the metal clip on the wheel to open it, slide the wheel onto the axle, and then release the clip so that it locks over the end of the axle. Gently tug each wheel to make sure the clip has popped into place and locked onto the axle. K K K K PICTURE 5 STEP 6 - PICTURE 6: Dress the FABRIC LINER (L) onto the WICKER BODY (D). Secure it with the ribbons (slip one or both of the ribbons, as needed, through holes in the wicker and