Résumé du contenu de la page N° 1
Model 700 ESP
Owner's Guide
Résumé du contenu de la page N° 2
Table of Contents Standard Transmitter Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What Is Included. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Important Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 System Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FCC/ID Notice . . . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 3
Standard Transmitter Configuration controls the Arm function. controls the Disarm function. controls Silent Mode™and an Auxiliary Output. controls the Panic function. and pressed simultaneously control another Auxiliary Output. and pressed simultaneously control another Auxiliary Output. 2 2000 Directed Electronics, Inc. ©
Résumé du contenu de la page N° 4
What is Included ■ A control module ■ A pair of four-button transmitters ® ■ A Stinger shock sensor (on-board the control module) ® ■ A Revenger siren with rechargeable back-up battery ■ The red status LED indicator light ® ■ A push-button Valet switch ■ A pair of siren keys Important Information Congratulations on the purchase of your state-of-the-art vehicle security system. It has been designed to provide years of trouble- free operation. The owner’s guide should help you to get the most
Résumé du contenu de la page N° 5
FCC/ID Notice This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interfer- ence received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. Transmitter Functions This security system’s control module
Résumé du contenu de la page N° 6
Standard Configuration Button The arming function is controlled by pressing . Button The disarming function is controlled by pressing . Button ™ Silent Mode and an optional auxiliary function are controlled by . (Silent Mode works by pressing for less than one second before arming or disarming. An optional auxiliary function, such as trunk release, can be controlled by pressing and holding for 1.5 seconds.) This auxiliary output controls _____________________________. Button The panic feature
Résumé du contenu de la page N° 7
Using Your System The transmitter buttons used in the instructions in this manual correspond to the Standard Configuration. Remember, this is not the only way your transmitter may be set up. It can be custom configured to meet your needs. Arming You can activate, or arm, the system by pressing on your trans- mitter for one second. When the system arms, you will hear a short siren sound, or chirp, and the parking lights will flash once. If the vehicle’s power door locks have been connected to th
Résumé du contenu de la page N° 8
20 seconds after the last door has been closed. The system is not actually armed at that point. The system arms and the doors lock (if connected and programmed for passive locking) at the 30 second point, but the siren will not chirp. The early chirp provides you with a 10-second warning prior to arming. NOTE: If any protected entry point, such as a door or a switch-protected trunk or hood, is open, the system will not passively arm unless forced passive arming is programmed on. See Programmin
Résumé du contenu de la page N° 9
Multi-Level Security Arming Multi-Level Security Arming allows you to select which of the security system's inputs or sensors will be active and which will be bypassed at the time that the system is armed. (See the Table of Zones section.) Pressing again within five seconds of arming the security system will activate the Multi-Level Security Arming feature. Each time is pressed again, a different secu- rity level is selected. The different security levels can be selected as follows: ■ Pressing o
Résumé du contenu de la page N° 10
Disarming To disarm the system, press . You will hear two chirps, and the parking lights will flash twice. If the power locks are connected to the system, the doors will unlock. If the siren chirps either four or five times when disarming, refer to the Diagnostics section of this guide. This is called Tamper Alert. High Security Disarm This security system proudly offers High Security Disarm. High Security Disarm is a feature that makes it possible to silence and reset the system while it is tri
Résumé du contenu de la page N° 11
if a vehicle door has not been opened. Rearming will take place regardless of whether the system has been programmed for active locking/arming or passive locking/arming. Disarming Without a Transmitter This feature allows you to temporarily disarm the security system without the transmitter should it be lost or damaged. In order to disarm without a transmitter, you must have the siren key and know where the siren is located. Be sure to check with the installer for the location of the siren, whic
Résumé du contenu de la page N° 12
Silent Mode ™ To temporarily turn off the arm or disarm chirps, use Silent Mode . Simply press for less than one second before arming or dis- arming the system, and the confirmation chirp(s) will be eliminated for that one operation only. If you want the arm/disarm confirmation chirps turned off permanently, your dealer can do this for you. ® NOTE: The Warn Away response to lighter impacts is bypassed if the system is armed using Silent Mode. This ensures that no chirps will be emitted by the s
Résumé du contenu de la page N° 13
® ® Valet Mode. You must also know where the Valet switch is located. Be sure to check with your installer at the time of instal- ® lation for the location of the Valet switch. To enter or exit Valet® Mode with the Valet switch: 1. Turn the ignition on. 2. Turn the ignition off. 3. Press and release the Valet switch within 10 seconds. DRW-35 The status LED will light solidly if you have entered Valet Mode, and it will go out if you have exited Valet Mode. ® Remote Valet You may also ent
Résumé du contenu de la page N° 14
® Nuisance Prevention Circuitry ® ® ™ Your system has DEI ’s Nuisance Prevention Circuitry (NPC ). It prevents annoying repetitive trigger sequences due to faulty door pin switches or environmental conditions such as thunder, jack- hammers, airport noise, etc. Here’s how it works: The alarm triggers three times. Each time, the same sensor or switch is triggering the alarm. If the three triggers are within 60 ™ minutes of each other, NPC will interpret this pattern of triggers ™ as false alarms.
Résumé du contenu de la page N° 15
Diagnostics The microprocessor at the heart of your system is constantly mon- itoring all of the switches and sensors that are connected to it. It detects any faulty switches and sensors and prevents them from disabling the entire system. The microprocessor will also record and report any triggers that occurred during your absence. Arming Diagnostics If the system is armed while an input is active (door open, sensor triggering, etc.) the unit will chirp once when arming and then one more ti
Résumé du contenu de la page N° 16
chirps are heard, a zone was triggered so many times that Nui- ® sance Prevention Circuitry has bypassed that zone. In either case, the status LED will indicate which zone was involved (see Table of Zones section). The system will retain this information in its memory, and continue to chirp four or five times each time it is disarmed, until the next time the ignition key is turned on. Table of Zones The zone number is the number of LED flashes used by the system to identify that input. The stand
Résumé du contenu de la page N° 17
Code Hopping The receiver and transmitters each use mathematical formulas called algorithms to change their codes each time the transmitter is used. This technology has been developed to increase the secu- rity of the unit. The control unit knows what the next codes should be. This helps to keep the transmitter "in sync" with the control unit even if you use the remote control out of range of the vehicle. However, if the transmitter has been pressed many times out of range of the vehicle, or th
Résumé du contenu de la page N° 18
Owner Recognition ® Owner Recognition is a feature available exclusively from DEI . ® Using a DEI Bitwriter hand-held programming tool, your dealer can program many of the system settings. The programmer makes it possible to program different settings for each transmitter that is used with the system. Then, whenever a specific transmitter is used, the system will recall the settings assigned to that trans- mitter. Owner Recognition lets up to four users of the system have different settings tha
Résumé du contenu de la page N° 19
Power Saver Mode Your system will automatically enter Power Saver Mode while armed or in Valet Mode, after a period of time in which no opera- tion has been performed. This lowers the current draw to prevent the system from draining the vehicle’s battery. Power Saver Mode takes over under the following conditions: ■ Power Saver when the system is armed: After the system has been armed for 24 hours, the LED will flash at half its normal rate, decreasing the system's current draw. ■ Power Saver in
Résumé du contenu de la page N° 20
■ Active arming (only with the transmitter) or passive arming (automatic arming 30-seconds after the last door has been closed). ■ Arming/disarming confirmation siren chirps on or off. ■ The ignition controlled door lock feature on or off: With this feature on, the doors will lock three seconds after the igni- tion is turned on, and unlock when the ignition is turned off. The system can also be programmed to prevent the doors from locking when the ignition is turned on with any door open. Igni
