Instruction d'utilisation Autostart AS-1221

Résumé du contenu de la page N° 1

AUTOMATIC TRA NSMI SSI ON MU L T I - C HA NNE L RE MOTE STA R TE R SYSTE M

AS-1221 / AS-1222
User Guide


WARNING


It is the responsibility of the vehicle operator to ensure

their vehicle is parked in a safe and responsible manner.
1. When leaving the vehicle, it is the user’s
responsibility to ensure that the gearshift lever is in
“Park” in order to avoid accidents upon remote starting.
2. It is the user's responsibility to ensure that the remote

starter is disabled or

Résumé du contenu de la page N° 2

Table of contents Introduction .......................................................2 Advanced Features: Installation-programmable Vehicle Presets .................................................2 options...............................................................5 Heater and Heated Seat ...............................2 Arming the Starter Kill...................................5 Windshield Wipers, Radio and Headlights....2 Remote Door Locks......................................5 Remote

Résumé du contenu de la page N° 3

Remote-starting Your Vehicle Remote-starting Press the Ι button for approx. 1 second. The parking lights will come on, informing you that the unit has received your signal. Approx. 5 seconds later, the engine will start. The parking lights will remain on during the pre-programmed run time. If the vehicle doesn’t start the first time, the system will shut down, wait a few seconds, and try to start the engine again. It will try to start the engine 3 times before giving up. Driving Off En

Résumé du contenu de la page N° 4

To EXIT Valet Mode 1. With the key in the Ignition switch, turn the key to the ON (RUN/IGNITION) and then OFF positions 5 times within 10 seconds. 2. The Parking Light will flash twice indicating the Module is now out of Valet Mode. The LED will turn OFF. Valet Mode Using the Valet Button (Available only of the plug-in Valet switch is installed) To put the system into Valet Mode: 1. Turn the key to the IGNITION ON (RUN) position. 2. Press (for at least 1 second) and release the Valet

Résumé du contenu de la page N° 5

Advanced Features: Installation-programmable options The system was designed with flexibility and OEM integration in mind. With its programmable options, this unit can control nearly any electrical system in your vehicle. Note: The programming of these features should be left to a professional. Changing any one of the settings may adversely affect the operation the Module. Arming the Starter Kill Note: Can only be activated if button Ι is programmed as LOCK or UNLOCK button. If installe

Résumé du contenu de la page N° 6

To keep your vehicle protected when the factory security system is disarmed for a remote start, Secure Lock will relock your doors as soon as the vehicle has started. Once the engine run cycle ends, Secure Lock will rearm your factory security system. Remote Trunk Release Option If your system was installed with the remote trunk release, you can open your trunk by pressing buttons Ι & ΙΙ simultaneously on the remote transmitter. Vehicles must have an electric trunk switch or a remote trun

Résumé du contenu de la page N° 7

LIMITED LIFETIME WARRANTY REMOTE STARTERS: As the manufacturer, 160031 Canada Inc. (“Autostart”) warrants to the original consumer purchaser only (non-transferable) that the remote starter module (control box) shall be free from defects in materials and workmanship for as long as the original consumer purchaser continuously owns the vehicle in which the remote starter was originally installed, as specified below: • 1) For the first year after the date of manufacture, as specified by the