Instruction d'utilisation Aiwa XP-R210

Résumé du contenu de la page N° 1

OWNER’S RECORD
d
For your convenience, record the model number and the serial number (you will
find it on the bottom of your set) in the space provided below. Please refer to
c
them when you contact your Aiwa dealer in case of difficulty.
Model No.
Serial No.
XP-R210
NOTE
FOR USE IN THE U.S.A.
COMPACT DISC PLAYER
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
OPERATING INSTRUCTIONS

Résumé du contenu de la page N° 2

an unstable shelf For safety • Do not attempt to disassemble the unit. Laser rays from the optical pickup are dangerous to the eyes. A • Make sure that pins or other foreign object do not get inside the player. • Take care not to drop the unit or subject it to strong shocks. • To keep dust from the pickup lens, keep the disc compartment lid closed after use. Never touch the lens. • If you hear no sound when playing a disc, DO NOT turn the volume up high because music could suddenly start at hi

Résumé du contenu de la page N° 3

USING ON RECHARGEABLE BATTERIES → C 12 C • Be sure to use size AA Ni-Cd 1.2 V 700 mAh rechargeable batteries, which are commercially available. • Be sure to read the instructions of the purchased rechargeable batteries before use. • When using on rechargeable batteries for the first time, charge them until the battery indicator goes out. • Before charging the batteries, close the disc compartment. You cannot charge the batteries while it is opened. 1 Insert the rechargeable batteries with the 0

Résumé du contenu de la page N° 4

BEFORE PLAYBACK E HOLD switch → D Release the HOLD switch before playback. → a When not using the unit, set the HOLD switch to the HOLD position. → b Accidentally pressed button will not function. If buttons are pressed when the HOLD switch is set to the HOLD position, “HOLd” flashes in the display. Turning on and off → D Turning the power on Press e PLAY/PAUSE. Power is turned on and playback starts. Note “Err” appears on the display when you play a disc placed upside-down or a defective disc.

Résumé du contenu de la page N° 5

PLAYBACK → H H Connect the supplied headphones to the PHONES/LINE OUT jack. 1 Release HOLD. 2 Place a disc. 3 Press PLAY/PAUSE. Playback starts from the first track. a track number b elapsed playing time Basic operation To stop Press sSTOP/OFF/CHARGE. To pause Press e PLAY/PAUSE. To resume, press it again. To search for the beginning of a track Press ror t. 12 To locate a desired passage Keep r or t pressed. Release the button at the start of desired passage. Display during playback → I Press E

Résumé du contenu de la page N° 6

com letely (ideally 40 to 48 seconds). Continuous shock or vibration may cause the sound to be interrupted even if the E•A•S•S PLUS function is activated. This is normal and not a malfunction. Should you experience an interruption in sound, stabilize the unit for a few seconds, then resume your activity. • When the E•A•S•S switch is slid during playback, the unit will pause for about V 2 seconds. • When you set the E•A•S•S switch to the 12 or OFF position, the quality of the sound will be better

Résumé du contenu de la page N° 7

RADIO RECEPTION M Tuning in to a station → M 1 Press TUNER ON/BAND repeatedly to select AM or FM. 2 Press TUNING + (t) or - (r) to tune in to a station. After listening, press sSTOP/OFF/CHARGE to turn off the radio. For quick tuning Keep either TUNING + (t) or - (r) pressed for about 1 second. When a station is tuned in to, the frequency stops automatically. However, it does not stop if the broadcast signal is weak. For better reception → N 1 FM: The headphone cord functions as the FM antenna.

Résumé du contenu de la page N° 8

1 Press TUNER ON/BAND repeatedly to select AM or FM. 2 Press PRESET CALL i/k repeatedly to select the preset number. After listening, press sSTOP/OFF/CHARGE to turn off the radio. Changing the presetting P 1 Press PRESET CALL i/k repeatedly to select the preset number you wish to change. 2 Keep ENTER/DISP pressed for 1 or more seconds until the preset number and the frequency flash. 3 While the preset number is flashing, press TUNING + (t) or - (r) to tune in to a station. 4 Press ENTER/DISP to