Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
The 2003 HUMMER H2 Owner’s Manual 1-1 Seats and Restraint Systems This section tells you how to use your seats and safety belts properly. It also explains the air bag system. 2-1 Features and Controls This section explains how to start and operate your vehicle. 3-1 Comfort Controls and Audio Systems This section tells you how to adjust the ventilation and comfort controls and how to operate your audio system. 4-1 Your Driving and the Road Here you’ll find helpful information and tips about the r
Résumé du contenu de la page N° 3
GENERAL MOTORS, GM, the GM Emblem, We support voluntary HUMMER and the name HUMMER are registered technician certification. trademarks and H2 is a trademark of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice. For vehicles first sold in Canada, substitute the name “General Motors of Canada Limited” for HUMMER whenever it appears in this manual. Please keep this manual i
Résumé du contenu de la page N° 4
How to Use this Manual CAUTION: Many people read their owner’s manual from beginning to end when they first receive their new vehicle. If you do this, it will help you learn about the features and These mean there is something that could hurt controls for your vehicle. In this manual, you’ll find you or other people. that pictures and words work together to explain things quickly. In the caution area, we tell you what the hazard is. Then we tell you what to do to help avoid or reduce the haz
Résumé du contenu de la page N° 5
Vehicle Damage Warnings Vehicle Symbols Also, in this book you will find these notices: Your vehicle may be equipped with components and labels that use symbols instead of text. Symbols, used on your vehicle, are shown along with the text NOTICE: describing the operation or information relating to a specific component, control, message, gage or indicator. These mean there is something that could damage If you need help figuring out a specific name of a your vehicle. component, gage or indicator
Résumé du contenu de la page N° 6
These are some examples of vehicle symbols you may find on your vehicle: v
Résumé du contenu de la page N° 7
Section 1 Seats and Restraint Systems Here you’ll find information about the seats in your vehicle and how to use your safety belts properly. You can also learn about some things you should not do with air bags and safety belts. 1-2 Seats and Seat Controls 1-45 Rear Safety Belt Comfort Guides for Children 1-16 Safety Belts: They’re for Everyone and Small Adults 1-21 Here Are Questions Many People Ask About 1-48 Center Passenger Position Safety Belts -- and the Answers 1-49 Children 1-22 How to W
Résumé du contenu de la page N° 8
Horizontal Control: You can adjust your vehicle’s front Seats and Seat Controls seats with the horizontal control located on the outboard This section tells you about the seats -- how to adjust edge of each front seat. them, and fold them up and down. It also tells you about Raise or lower the front of the seat by raising or reclining front seatbacks and head restraints. lowering the forward edge of the control. Raise or lower the rear of the seat by raising or lowering the rear edge Power Seats
Résumé du contenu de la page N° 9
Power Lumbar Control Memory Seat Use the lumbar control, The controls for the located on the outboard memory function are side of the seat, to increase located on the driver’s or decrease lumbar support door trim panel. in an area of the lower seatback. To increase support, press and hold the front of the These buttons are used to program and recall the control. To decrease support, press and hold the rear memory settings for the driver’s seat and both the of the control. Let go of the control
Résumé du contenu de la page N° 10
To set your memory seat, mirrors and radio station To recall memory seat, mirror positions and radio station presets, do the following: presets, make sure your vehicle is in PARK (P), then press the 1 or 2 button of the memory control. You will 1. Adjust the driver’s seat (including the recliner, hear a single chime ring to let you know the memory lumbar and side wing area), both outside mirrors and position will be recalled the radio station presets to your preference. See “Mirrors” and “Radio”
Résumé du contenu de la page N° 11
Easy Exit Seat Heated Front Seats (If Equipped) This feature makes entering or leaving the driver’s seat The buttons for the driver’s easier. side heated seat are located on the driver’s side door (Exit): This button is used to program and recall panel. The buttons for the the desired driver’s seat exit/entry position. The seat passenger’s side heated position can be personalized for driver 1 and driver 2. seat are located on the To store the seat exit position for driver 1 or driver 2, passe
Résumé du contenu de la page N° 12
To heat only the seatback, press the vertical button with Reclining Front Seatbacks the heated seatback symbol. An indicator light on the The vertical power seat control described earlier allows button will glow to designate that only the seatback is the seatback to recline. being heated. Additional presses will cycle through the heat levels for the seatback only. Press the horizontal button again to heat the entire seat. The heated front seats will shut off when the ignition is turned to LOCK.
Résumé du contenu de la page N° 13
Head Restraints CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t do its job. In a crash, you could go into it, receiving neck or other injuries. The lap belt can’t do its job either. In a crash the belt could go up over your abdomen. The belt forces would be there, not at your pelvic bones. This could cause serious internal injuries. For prop
Résumé du contenu de la page N° 14
To raise or lower a head restraint, pull up on the head Rear Seats restraint or push the head restraint down. 60/40 Split Bench Seat (Second Row) The head restraints tilt forward also. To tilt a head restraint forward, grab the top of the restraint and pull it The 60/40 split bench seat can be folded to give you toward you until you hear a click. Let go of the head more cargo space. restraint and it will stay in that position. If you want the Folding the Seatbacks head restraint to tilt forward
Résumé du contenu de la page N° 15
To fold the rear seat, do the following: The rear seatbacks are equipped with rearward folding head restraints. When the seatback is being folded down, 1. Insert the two safety belt buckles into the pockets on the head restraint will automatically fold rearward. the driver’s side seatback and place the passenger’s side seat belt through the loop located near the If the seatback cannot fold flat because it interferes with armrest before folding the rear seat. the cushion, try moving the front sea
Résumé du contenu de la page N° 16
To fold the seatback, do the following: Third Row Single Seat (If Equipped) Pull up on the release lever, Folding the Seatback labeled 1, located on the rear of the seatback and push the seatback forward. CAUTION: If the seatback isn’t locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always press rearward on the seatback to be sure it is locked. Unfolding the Seatback 1. To return the seat to the passenger position, pull up on the rele
Résumé du contenu de la page N° 17
Tilting the Seat 2. Unlatch the seat from the floor by pulling up on the lever labeled 2, located on the rear of CAUTION: the seat. If the seatback isn’t locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always press rearward on the seatback to be sure it is locked. 1. Fold the seatbacks forward using the instructions listed previously. 3. Lift the rear of the seat up off of the floor and push it forward until it locks into place. You
Résumé du contenu de la page N° 18
Returning the Seat to an Upright Position 4. Push down on the seat firmly. Try pulling it up to be sure it is locked into place. To return the seat to an upright position, do the following: 5. Pull up on the release lever labeled 1 and then pull up on the seatback until the seatback locks into the upright position. Removing the Third Row Seat To remove the third row seat, do the following: 1. Open the liftgate. 2. Fold the seatback forward onto the seat cushion by using the lever labeled 1. Th
Résumé du contenu de la page N° 19
3. To unlatch the rear of the seat from the floor, pull up on the release lever labeled 2, located at the rear of the seat, and lift the rear of the seat up off of the floor. 4. Squeeze the release handle while pulling the seat out. 5. While holding the rear of the seat up, roll the seat out of the vehicle. 1-13
Résumé du contenu de la page N° 20
Replacing the Third Row Single Seat To replace the third row single seat, do the following: 1. Open the liftgate. 2. While holding the rear of the seat up, slide the front CAUTION: wheels into the slots on the floor. The front latches should lock into place. If latches do not lock, try If the seatback isn’t locked, it could move forward tilting the rear of the seat upwards. in a sudden stop or crash. That could cause injury 3. Once the latches are engaged, let the seat drop into to the person si
