Résumé du contenu de la page N° 1
2-698-276-21 (1)
FM/AM
Compact Disc Player
US
Operating Instructions
FR
Mode d’emploi
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record these numbers in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. Serial No.
To cancel the demonstration (DEMO) display, see page 10.
Pour annuler
Résumé du contenu de la page N° 2
The “SAT Radio Ready” For installation and connections, see the logo indicates that this supplied installation/connections manual. product will control a satellite radio tuner module (sold separately). Please see your nearest Warning authorized Sony dealer for details on the satellite radio tuner module. This equipment has been tested and found to “SAT Radio,” “SAT Radio Ready,” the SAT comply with the limits for a Class B digital Radio and SAT Radio Ready logos and all device, pursuant
Résumé du contenu de la page N° 3
Table of Contents Welcome ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Other functions Changing the sound settings . . . . . . . . . . . . . . . 9 Getting Started Adjusting the sound characteristics — BAL/FAD/SUB. . . . . . . . . . . . . . . . . . . . 9 Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4 Customizing the equalizer curve Preparing the card remote commander . . . . . . . 4 — EQ3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Setting t
Résumé du contenu de la page N° 4
Welcome ! Getting Started Thank you for purchasing this Sony Compact Resetting the unit Disc Player. You can enjoy your drive with the following functions. Before operating the unit for the first time, or CD playback after replacing the car battery or changing the You can play CD-DA (also containing CD connections, you must reset the unit. TEXT*), CD-R/CD-RW (MP3/WMA/AAC Detach the front panel and press the RESET files also containing Multi Session (page 13)) button with a pointed obje
Résumé du contenu de la page N° 5
Attaching the front panel Detaching the front panel Place the hole A of the front panel onto the You can detach the front panel of this unit to spindle B on the unit, then lightly push the left prevent theft. side in. Press (SOURCE) on the unit (or insert a disc) to operate the unit. Caution alarm If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. A The alarm will only sound if the built-in amplifier is use
Résumé du contenu de la page N° 6
Location of controls and basic operations Main unit 12 3 4 5 67 OFF PUSH SELECT OPEN DSO SOURCE AUX SEEK SEEK EQ3 MODE CAT GP/ALBM REP SHUF PAUSE BTM DSPL 123 4 5 6 SCRL CDX-GT510 CDX-GT51W 8 9q;qaqsqd qf qg Front panel removed qh qj qk RESET Refer to the pages listed for details. The Card remote commander corresponding buttons on the card remote RM-X151 commander control the same functions as those on the unit. wa 1 OFF ATT A OFF button ws To power off; stop the source. 4 SOURCE SEL MODE qs
Résumé du contenu de la page N° 7
H EQ3 (equalizer) button 9 The following buttons on the card remote commander have also different buttons/functions To select an equalizer type (XPLOD, from the unit. Remove the insulation film before VOCAL, EDGE, CRUISE, SPACE, use (page 4). GRAVITY, CUSTOM or OFF). ql < (.)/, (>) buttons I Receptor for the card remote To control CD/radio, the same as (SEEK) commander –/+ on the unit. J SEEK –/+ buttons w; VOL (volume) +/– button CD: To adjust volume. To skip tracks (press); skip tracks
Résumé du contenu de la page N° 8
CD Radio For details on selecting a CD/MD changer, see Storing and receiving stations page 11. Caution Display items When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically — BTM 1 Press (SOURCE) repeatedly until “TUNER” appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2. A Source 2 Press and hold (BTM) until “BTM” B ATRAC/WMA/MP3/AAC indication flashes. C Track number/Elapsed playing
Résumé du contenu de la page N° 9
Tuning automatically Other functions 1 Select the band, then press (SEEK) –/+ Changing the sound settings to search for the station. Scanning stops when the unit receives a station. Repeat this procedure until the Adjusting the sound desired station is received. characteristics — BAL/FAD/SUB Tip You can adjust the balance, fader, and subwoofer If you know the frequency of the station you want to volume. listen to, press and hold (SEEK) –/+ to locate the approximate frequency, then press (
Résumé du contenu de la page N° 10
After 3 seconds, the setting is complete and ILM (Illumination) the display returns to normal play/reception To change the illumination color: “ILM-1” (z) mode. or “ILM-2.” Tip M.DSPL (Motion Display) Other equalizer types are also adjustable. To select the Motion Display mode. With the card remote commander – “M.DSPL-SA” (z): to show moving patterns In step 3, to adjust the selected item, press <, M, , and spectrum analyzer. or m. – “M.DSPL-ON”: to show moving patterns. – “M.DSPL-OFF”: to
Résumé du contenu de la page N° 11
DSPL MODE SEL Skipping albums and discs 1 During playback, press (1)/(2) (GP/ALBM –/+). AUX Press (1)/(2) (GP/ALBM To skip –/+) album and release (hold for a moment). AUX album within 2 seconds of first continuously releasing. discs repeatedly. discs then, press again within 2 Connecting cord* continuously seconds and hold. (not supplied) Repeat and shuffle play 1 During playback, press (3) (REP) or (4) * Be sure to use a straight type plug. (SHUF) repeatedly until the desired setting ap
Résumé du contenu de la page N° 12
Location of controls Additional Information The corresponding buttons on the rotary commander control the same functions as those Precautions on this unit. ATT If your car has been parked in direct sunlight, SEL allow the unit to cool off before operating it. PRESET/ Power antenna (aerial) will extend automatically DISC while the unit is operating. MODE Moisture condensation SOURCE On a rainy day or in a very damp area, moisture condensation may occur inside the lenses and DSPL display
Résumé du contenu de la page N° 13
Before playing, clean the discs Playback order of MP3/WMA/AAC with a commercially available cleaning cloth. Wipe each disc files from the center out. Do not use Folder solvents such as benzine, MP3/WMA/AAC (album) thinner, commercially available cleaners, or antistatic spray MP3/WMA/ AAC file intended for analog discs. (track) Notes on CD-R/CD-RW discs Some CD-Rs/CD-RWs (depending on the equipment used for its recording or the condition of the disc) may not play on this unit. Yo
Résumé du contenu de la page N° 14
During playback or fast-forward/reverse of a VBR Notes on the lithium battery Keep the lithium battery out of the reach of children. (variable bit rate) AAC file, elapsed playing time Should the battery be swallowed, immediately may not display accurately. consult a doctor. * only for 128 kbps Wipe the battery with a dry cloth to assure a good contact. Note on AAC Be sure to observe the correct polarity when Playback of a copyright-protected file is not supported. installing the bat
Résumé du contenu de la page N° 15
Removing the unit Specifications 1 Remove the protection collar. AUDIO POWER SPECIFICATIONS 1Detach the front panel (page 5). POWER OUTPUT AND TOTAL HARMONIC DISTORTION 2Engage the release keys together with the 23.2 watts per channel minimum continuous protection collar. average power into 4 ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 5% total harmonic distortion. CEA2006 Standard Power Output: 17 Watts RMS × 4 at 4 Ohms < 1% THD+N SN Ratio: 82 dBA Orient the release
Résumé du contenu de la page N° 16
Tone controls: Low: ±10 dB at 60 Hz (XPLOD) Troubleshooting Mid: ±10 dB at 1 kHz (XPLOD) High: ±10 dB at 10 kHz (XPLOD) The following checklist will help you remedy Power requirements: 12 V DC car battery problems you may encounter with your unit. (negative ground (earth)) Before going through the checklist below, check the Dimensions: Approx. 178 × 50 × 180 mm connection and operating procedures. 1 1 (7 /8 × 2 × 7 /8 in) (w/h/d) Mounting dimensions: Approx. 182 × 53 × 162 mm 1 1 1 General
Résumé du contenu de la page N° 17
Automatic tuning is not possible. CD/MD playback Setting of the local seek mode is not correct. The disc cannot be loaded. t Tuning stops too frequently: Another disc is already loaded. Set “LOCAL-ON” (page 10). The disc has been forcibly inserted upside down or in t Tuning does not stop at a station: the wrong way. Set “MONO-ON” (page 10). The disc does not playback. The broadcast signal is too weak. Defective or dirty disc. t Perform manual tuning. The CD-Rs/CD-RWs are not for aud
Résumé du contenu de la page N° 18
NO NAME A disc/album/group/track name is not written in the track. NOT READ The disc information has not been read by the unit. t Load the disc, then select it on the list. NOTREADY The lid of the MD changer is open or the MDs are not inserted properly. t Close the lid or insert the MDs properly. OFFSET There may be an internal malfunction. t Check the connection. If the error indication remains on in the display, consult your nearest Sony dealer. READ The unit is reading all track and group
Résumé du contenu de la page N° 19
Résumé du contenu de la page N° 20
En ce qui concerne l’installation et les connexions, consulter le manuel d’installation/raccordement fourni. Avertissement ATTENTION L’utilisation d’instruments optiques avec ce produit augmente les risques pour les yeux. Avertissement au cas où le contact de votre voiture ne comporte pas de position ACC Veillez à régler la fonction Auto Off (page 11). L’appareil s’éteint complètement et automatiquement après le laps de temps choisi une fois l’appareil mis hors tension afin d’éviter que
