Résumé du contenu de la page N° 1
WP3821
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
1
Résumé du contenu de la page N° 4
Résumé du contenu de la page N° 5
English 6 EsPañol Português do Brasil 9 WP3821
Résumé du contenu de la page N° 6
6 English introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. general description (Fig. 1) a Filter cartridge B Water purifier housing C Filter capacity selection button d Battery low indication E Selected filter capacity indication F Remaining filter capacity indication g Reset button h Water selection lever i Battery compartment cover J Stainless steel screen K Rubber
Résumé du contenu de la page N° 7
English Warning - This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. - Children should be supervised to ensure that they do not play with the appliance. Before use - To prevent quick clogging of the filter cartridge, let the water run at the unfiltere
Résumé du contenu de la page N° 8
English - Any liquid leaking from the battery is harmful to eyes and skin. Avoid eye and skin contact. applications - Only use the appliance to filter water that meets drinking water standards at the point of use. - Do not block the filtered water outlet or connect other devices to it. - If the water pressure is very high, reduce the water flow of the tap to prevent damage to the cartridge. - Keep the water purifier away from heat to avoid distortion or breakage. - Do not tamper with the w
Résumé du contenu de la page N° 9
English 9 - The granular activated carbon removes the unpleasant chlorine smell and taste from your tap water. - The LCD display on the water purifier shows the current remaining filter capacity. A remaining filter capacity of 0 tells you that you have to replace the filter. Philips’ unique cartridge replacement indicator also helps you to determine when to replace the filter. - The high-speed initial flow rate of 2 litres per minute gives you plenty of clean water instantly. - The water se
Résumé du contenu de la page N° 10
10 English Note: Make sure you align the ‘I’ marks properly, otherwise water may leak into the battery compartment. , When the battery is properly inserted, the LCD display performs a self-check for approx. 9 seconds. Then the display goes off again. Before installation The screw thread of the tap is sharp. - Before you install the water purifier, make sure all tap-mounting adapters you require are present. - The tap must have a diameter of 13mm-25mm. - Determine what type of tap you have
Résumé du contenu de la page N° 11
English 11 installation B-type adapter - For taps with an aerator (threaded on the outside) (Fig. 11). 1 Remove the attachment nut and the adapter from the water purifier (Fig. 7). Remove the aerator cap from the tap and pass the attachment nut over the spout. Take out the original adapter and screw the matching adapter (B-type) onto the tap (Fig. 12). Tighten the adapter further with a coin (Fig. 13). Firmly screw the attachment nut onto the water purifier housing (Fig. 14). i
Résumé du contenu de la page N° 12
1 English Screw the attachment nut firmly onto the water purifier housing (Fig. 22). Make sure the rubber washer is firmly pushed against the tap to prevent water leakage. Installing the filter cartridge 1 Make sure the tap is closed. Set the water selection lever to the unfiltered stream position (Fig. 23). Tilt the filter cartridge 90° backwards and insert it into the water purifier housing. (Fig. 24) Pull the cartridge upwards until it is in upright position. (Fig. 25
Résumé du contenu de la page N° 13
English 1 Press the filter capacity selection button again until the display shows the capacity of your filter cartridge (1500-2500-900-1500 etc.). Stop pressing the filter capacity selection button when the display shows 2500 litres. , The selected filter capacity and the remaining filter capacity are shown for 5 seconds. using the appliance 1 Turn the water selection lever to the desired setting (‘click’). The water selection level has 3 settings: filtered spray, unfiltered spra
Résumé du contenu de la page N° 14
1 English Unfiltered spray Select this setting for washing dishes and other jobs that require a gentle water flow. 1 Turn the water selection lever until the unfiltered spray symbol is aligned with the indicator (Fig. 27). Do not let water hotter than 50°C run through the water purifier at this setting, as this may damage the water purifier. Unfiltered stream Select this setting for a strong water flow. 1 Turn the water selection lever until the unfiltered stream symbol is aligned with
Résumé du contenu de la page N° 15
English 15 replacement Replacing the filter cartridge New filter cartridges are available under type number WP3911. Replace the filter cartridge if it is clogged to prevent damage to the water purifier. No part of the cartridge can be reused. Discard the used cartridge and replace it with a new one. When to replace the filter cartridge The actual lifetime of the filter cartridge depends on the quality of the local water and the water pressure. For optimal performance of the water purifier,
Résumé du contenu de la page N° 16
16 English Reduced filter cartridge life The filter cartridge has a shorter life and should be replaced more frequently in the following situations: - The water pressure is very low. - The pipes and water tank are worn. - The tap water is contaminated due to plumbing activities or cleaning of the water tank. - When you use cloudy water immediately after heavy rain. How to replace the filter cartridge 1 To replace the filter cartridge, close the tap and set the water selection lever to the u
Résumé du contenu de la page N° 17
English 1 How to reset the filter capacity Note: Always reset the filter capacity when you replace the filter cartridge. This is necessary to set the remaining filter capacity back to its initial value (i.e. 2500, 1500 or 900 litres). 1 Press the reset button for 2 seconds Press the filter capacity selection button. , The set filter capacity flashes on the display for 4 seconds. If the new filter cartridge has the same capacity as the old cartridge, simply wait until the setting st
Résumé du contenu de la page N° 18
1 English Environment - Batteries contain substances that may pollute the environment. Do not throw away empty batteries with the normal household waste, but dispose of them in at an official collection point for batteries. Always remove the battery before you discard and hand in the appliance at an official collection point. - Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing thi
Résumé du contenu de la page N° 19
English 19 Problem Solution Perhaps the tap water pressure is higher than specified. You may need to wind some Teflon tape around the screw thread of the adapter. The water Perhaps the stainless steel screen under the rubber flow is weak at washer inside the water purifier housing is clogged. the unfiltered Clean it with a soft brush and rinse it. setting. The water Perhaps the filter cartridge is clogged. Replace the flow is weak at filter cartridge. the filtered setting. Perhaps the tap
Résumé du contenu de la page N° 20
20 English Problem Solution Perhaps the battery compartment cover is not properly fitted. Reattach the battery compartment cover in the correct way (see section ‘Inserting the battery’ in chapter ‘Preparing for use’). Perhaps the water purifier is set to the unfiltered spray setting or the unfiltered stream setting. In these cases, the display is off. The display only works when the water purifier is set to the filtered spray setting. The Perhaps the battery is low. Replace the battery. d
