Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
ZMI-M90S, ZMI-M90G e p p
Résumé du contenu de la page N° 3
CONTENTS INSTALLATION Mount heights & clearance 1 Ducting 1,2 Specifications 3 Electrical 3 Mounting the hood 4 Duct cover 4 EZ Anchors 4 Ductless Conversion 5 Carbon Filters 5 FEATURES & CONTROLS Touch controls & features 5 Advance display functions 5 Filter change indicator 5,6 Filter clean indicator 5,7 MAINTENANCE Cleaning 9 Lights replacement 10 WARRANTY Coverage & exceptions 11
Résumé du contenu de la page N° 4
Résumé du contenu de la page N° 5
INSTALLATION 2 DUCTING WARNING: FIRE HAZARD NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling, attics or garages. All exhaust must be ducted to the outside. Use Metal ductwork only. Fasten all connections with sheet metal screws and tape all joints w/ certified Silver Tape or Duct Tape. Some Ducting Options: side wall cap side wall cap w/ gravity damper w/ gravity damper Soffit or crawl space Roof Pitch w/ Flashing & Cap
Résumé du contenu de la page N° 6
INSTALLATION 3 SPECIFICATIONS 10.47" 3/4" Elec. K.O. 9-5/8" 10" 2-1/4" 1-1/4" 6" 13.77" 6-1/2" 14-3/8" ELECTRICAL WARNING: All Electrical work must by performed by qualified electrician or person with similar technical know how and background. For personal safety, remove house fuse or open circuit breaker before beginning installation. Do not use extension cord or adapter plug with this appliance. Follow National electrical codes or prevailing local codes and ordinances. Electrical Supply: Thi
Résumé du contenu de la page N° 7
Résumé du contenu de la page N° 8
INSTALLATION 5 DUCTLESS CONVERSION Ductless conversion is intended for applications where an exhaust duct work is not possible to be installed. When converted, the hood functions as a "purifying" hood rather than an exhaust hood. Fumes and exhaust from cooking is drawn and filtered by a set of optional Carbon Filters. The air is then purified and re-circulated back within the home. We recommend to ALWAYS exhaust air outside of the home by employing existing or installing new duct work, if p
Résumé du contenu de la page N° 9
FEATURES & CONTROLS 6 TOUCH CONTROLS & FEATURES 1 Blower On/Off 5 Display (Speed level, Delay Off Indicator, Filter Clean/ Change) 4 Lights On/Off/ Hold to Dim 2 Adjust 6 Speed Levels 3 15 Min Delay Off 1 Blower On/Off By pressing , the blower is switched On and Off. When switched on, the blower starts up on speed level 3. 2 Speed Selection The 6 speed levels are selected by pressing to decrease and to increase speed level. The display indicates level selected. 3 De
Résumé du contenu de la page N° 10
FEATURES & CONTROLS 7 CONTROLS: FILTER CHANGE INDICATOR (Carbon Filters) Filter Change Reminder (Carbon, if fitted): When your hood is installed as a 'Purifying' (Ductless Recirculating) unit, it is fitted with a set of Carbon Filters to purify exhaust and fumes from cooking, and re-circulates the air within the home. These Carbon Filters are required to be replaced after every 120 hours of use. The Filter Change Reminder function in the microprocessor needs to be switched on. The micropr
Résumé du contenu de la page N° 11
FEATURES & CONTROLS 8 CONTROLS: FILTER CLEAN INDICATOR (Metal Filters) Filter Clean Reminder (Standard Metal Filters fitted) Whether your hood is installed as an Exhaust or Purifying unit, a set of metal filters are fitted by the factory. These Metal Filters are intended to filter out residue from cooking. It need not be replaced on a regular basis but are required to be kept clean. The Filter Clean Reminder function in the microprocessor will automatically indicate by a flashing
Résumé du contenu de la page N° 12
MAINTENANCE 9 CLEANING Surface Maintenance: Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent (e.g. comet powder scrub, EZ-Off oven cleaner), or steel wool/ scoring pads which will scratch and damage surface. For heavier soil use liquid degreaser such as 'Formula 409' or 'Fantastic' brand cleaner. After cleaning, you may use non abrasive stainless steel polish/ cleaners such as 3M or ZEP, to polish and buff out the stainless luster and
Résumé du contenu de la page N° 13
MAINTENANCE 10 LIGHTS Replacing Light Bulbs CAUTION: Light bulb becomes extremely hot when turned on. DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns. Make sure all power is turned off and bulbs are not hot. Remove by turning bulb counter clockwise. If bulbs are difficult to turn due to prolonged use, firmly attach a glass suction cup approx. the diameter of the bulb and turn. Replacement bulbs are available at specialty lighting stores. Purchase
Résumé du contenu de la page N° 14
WARRANTY 11 TO OBTAIN SERVICE UNDER WARRANTY: You must present proof of original purchase date. Please keep a copy of your dated proof of purchase (sales slip) in order to obtain service under warranty. One Year Service Repair Warranty: For one year from date of original purchase, we will provide free of charge, service labor to repair any failed parts or components due to manufacturing defects. Two Y ears Parts Warranty: For two years from date of original purchase, we will provide free of ch
Résumé du contenu de la page N° 15
