Résumé du contenu de la page N° 1
USER MANUAL
BREEZE
QC 520, QC 620, QC 720
Résumé du contenu de la page N° 2
Fläkten är tillverkad i moduler så att endast små detaljer behöver bytas vid eventuell service. Ventilatoren er bygget opp av moduler slik at det kun er nødvendig å bytte små detaljer ved eventuelt behov for service. Emhætten er frem stillet i moduler, så de enkelte del kan udskiftes ved hætter evt. service. Liesituuletin on moduulirakenteinen siten, että huollon yhteydessä pitää vaihtaa vain SERVICE pieniä osia. Built in modules so that only small parts need replacing at service. Fläkten kan fö
Résumé du contenu de la page N° 3
Contents Safety instructions .................................................... 31 Guide to use the Instructions Description of the cooker hood ................................ 32 The following symbols will be found in the text to Using the cooker hood .............................................. 33 guide you throughout the Instructions: Maintenance and cleaning ........................................ 33 If the hood does not function .................................... 34 Safety instructio
Résumé du contenu de la page N° 4
Description of the cooker hood The cooker hood Work light Duct Motorhouse Grease filter Control panel Accessories Functions The following are included with the cooker hood: There are two possible systems: Template for mounting: Template for mounting Extraction of air to outside using optional on wall and under cupboard (printed on packaging). venting kit and evacuation duct. Mounting set: 4 pcs 4x60 mm screws, 4 pcs 5x30 Recirculation using optional carbon filter. mm screws, 4 pcs M5x30
Résumé du contenu de la page N° 5
Using the cooker hood The control panel Do not operate the fan at a higher speed The control panel is under the cooker hood. Best than necessary. The low speeds are results are obtained by using low speed for normal adequate for ordinary requirements while conditions and high speed when smells and steam are cooking. The high speeds should be used more concentrated. only if food has burnt while cooking, or for other strong fumes. On and Off switch. Speed adjustment switch. Correct ventilation If
Résumé du contenu de la page N° 6
Cleaning the motor cover It is also possible to clean the motor cover (Fig. 2): Remove the grease filter. Remove the inlet ring (A) by turning it anti- clockwise. Remove the fan wheel by unscrewing the centre nut (B) on the fan wheel. Use gloves when removing the fan wheel. Clean all the plastic and metal parts with warm water and washing dergent. Replace in reverse order. B A Fig. 2 Changing the light Turn off the power before changing the light. Remove the lampglass by pushing the two sn
Résumé du contenu de la page N° 7
498 / 598 / 698 Technical data Model QC 520 QC 620 QC 720 Airflow Max. 320 m ³/h x) 180 m ³/h 320 m ³/h x) 180 m ³/h 320 m ³/h x) 180 m ³/h Min. 160 m ³/h 160 m ³/h 160 m ³/h Size Height 45 mm 45 mm 45 mm Width 498 mm 598 mm 698 mm Depth 445 mm 445 mm 445 mm Light Max 11 W PL Max 11 W PL Max 11 W PL Grease filter 1 pc. 1 pc. 1 pc. Voltage 230 V 230 V 230 V Total power 111 W 111 W 111 W x) Valid when the cooker hood is fitted with carbon filter. 45 Fig. 4 Installation Unpacking Check that the coo
Résumé du contenu de la page N° 8
Mounting of cooker hood in a cupboard, Alt. 1 (Fig. 6): B Cut an opening and drill 4 holes in the underside of the cupboard. Use the template printed on the A packaging. C Mount the locknuts (A) on the cooker hood. 1 Mount the cooker hood with four screws (B) and washers (C). 2 Fig. 6 Mounting of cooker hood in a cupboard, Alt. 2 (Fig. 7): Cut an opening in the underside of the cupboard. Use the template printed on the packaging. Mount the cooker hood with two screws (A) and the B spac
Résumé du contenu de la page N° 9
Mounting the cold air valve (Fig. 10): A B Not applicable for recirculation. The cold air valve consists of a damper seat with two valves, which shall be fitted into the hood outlet. If there is no other form of ventilation to expel air from the kitchen than the hood, the outer end of the valves should be clipped off C and removed. Insert a pen or something similar between the valves. These should open up easily now. Fig. 10 Extend the duct hose correctly. A duct hose which is too long or has to
Résumé du contenu de la page N° 10
821 27 45-02/2 ©1998 MO-STF
