Résumé du contenu de la page N° 1
R R
EN
TDM-7586RB
TDM-7584R
TDM-7582R
DE
FM/MW/LW/RDS Cassette Receiver
• OWNER'S MANUAL
Please read before using this equipment.
• BEDIENUNGSANLEITUNG
FR
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
• MODE D'EMPLOI
Veuillez lire avant d'utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ES
• ISTRUZIONI PER L'USO
Si prega di leggere prima di utilizzare il
attrezzatura.
• ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa
igenom d
Résumé du contenu de la page N° 2
CHM-S630 • CD changer for TDM-7586RB/ TDM-7584R/TDM-7582R CHA-S634 CHA-1214 • CD-Wechsler für TDM-7586RB/ TDM-7584R/TDM-7582R • Changeur CD pour TDM-7586RB/ TDM-7584R/TDM-7582R • Cambiador de CD para TDM-7586RB/TDM-7584R/TDM-7582R • Cambia CD per TDM-7586RB/ TDM-7584R/TDM-7582R • CD-växlare för TDM-7586RB/ TDM-7584R/TDM-7582R Alpine CD Changers Give You More! More musical selections, more versatility, more convenience. The CHA-S634 is a high-performance 6-disc changer with a new M DAC, CD-R/RW P
Résumé du contenu de la page N° 3
ENGLISH Contents Cassette Player Operation Operating Instructions Inserting/Ejecting Cassette ..............................11 Normal Play and Pause ....................................11 WARNING Dolby B NR (Noise Reduction) EN (TDM-7586RB/TDM-7584R only) ..............11 WARNING .................................................. 2 Repeat Play ......................................................11 CAUTION ................................................... 2 Blank Skip (B.SKIP)................
Résumé du contenu de la page N° 4
WARNING WARNING CAUTION The exclamation point within an equilateral The exclamation point within an equilateral triangle and "WARNING" are intended to alert the triangle and "CAUTION" are intended to alert the user to the presence of important operating user to the presence of important operating instructions. instructions. Failure to heed the instructions will result in Failure to heed the instructions can result in injury severe injury or death. or material damage. DO NOT DISASSEMBLE OR ALTER.
Résumé du contenu de la page N° 5
Precision Tape Mechanism Prevent any foreign objects from entering the cassette opening as the precision mechanism and tape head may be damaged. Never play dirty or dusty tapes – they can damage the tape head. EN Tape Head Cleaning Periodic cleaning (approximately every 20 hours of use) of the tape head with a wet type head-cleaning cassette tape (available at audio stores) is necessary for best performance. Fuse Replacement When replacing the fuse(s), the replacement must be of the same amperag
Résumé du contenu de la page N° 6
Basic Operation 2 POWER/SETUP MODE/LOUD c 1 1 Detaching the Front Panel • Connectable to Remote Control Interface Box 1 Press the POWER button to turn off the power. You can operate this unit from the vehicle's control unit when an Alpine Remote Control 2 Press the (Release) button until the front Interface Box (optional) is connected. For panel pops out. details, contact your Alpine dealer. 3 Grasp the left side of the front panel and pull it out. Initial System Start-Up Immediately after inst
Résumé du contenu de la page N° 7
Turning Power On and Off Adjusting Volume/Bass/Treble/ Balance (Between Left and Right 1 Press the POWER button to turn on the unit. Channels)/Fader (Between Front NOTE The unit can be turned on by pressing any other button and Rear Speakers) except the eject c button. 1 Press the MODE button repeatedly to choose EN The volume level gradually increases to the the desired mode. previous level you were listening to before the Each press changes the modes as follows: unit was turned off. Press the
Résumé du contenu de la page N° 8
Radio Operation BAND SOURCE DN g f UP TUNE / A.ME Preset buttons (1 through 6) 3 Press the TUNE button to illuminate the "DX" Manual Tuning and "SEEK" indicators in the display. With the DX mode activated, both strong and 1 Press the SOURCE button until radio frequency weak stations will be tuned in the Auto-Seek appears in the display. operation. Press again to return to the local mode. The "DX" 2 Press the BAND button repeatedly until the indicator will turn off and the "SEEK" indicator desir
Résumé du contenu de la page N° 9
3 Repeat the procedure to store up to 5 other Tuning to Preset Stations stations onto the same band. To use this procedure for other bands, simply 1 Press the SOURCE button until the frequency select the band desired and repeat the appears in the display. procedure. 2 Press the BAND button repeatedly until the A total of 24 stations can be stored in the preset desired band is displayed. memory (6 stations for each band; FM1, FM2, Each press changes the radio bands as follows: MW and LW). → F1 →
Résumé du contenu de la page N° 10
RDS Operation AF T.INFO F 3 POWER/SETUP Preset buttons DN g f UP PTY (1 through 6) Setting RDS Reception Mode and Recalling Preset RDS Stations Receiving RDS Stations 1 Press the AF button to activate the RDS mode. The display shows "AF" when the RDS mode is activated. The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of 2 Make sure that the function indicator at the top regular FM broadcast. The RDS allows you to side of the "F" button illumina
Résumé du contenu de la page N° 11
NOTE Turning Emergency Alarm On or Off If no button is pressed within 5 seconds after pressing the PTY button, the PTY mode will be automatically cancelled. 1 Press and hold the SETUP button for at least 3 3 Press the DN g and f UP buttons within 5 seconds. seconds after activating the PTY mode to 2 Press the Preset 3 button repeatedly to select choose the desired programme type while the the PTY31 ON or PTY31 OFF mode. PTY (programme type) is being displayed. Each In the PTY31 ON mode, the unit
Résumé du contenu de la page N° 12
RDS Operation F SETUP 2 NEWS Priority News Receiving RDS Regional (Local) Stations This function allows you to preset to give priority to the News programme. You will never miss the 1 Press and hold the SETUP button for at least 3 News programme as the unit automatically gives seconds to activate the setting mode. priority to the News programme whenever it begins broadcasting, and interrupts the 2 Press the preset 2 button to turn on or off the programme you are currently listening. This REG (Re
Résumé du contenu de la page N° 13
Cassette Player Operation c B NR REPEAT -/J B.SKIP Inserting/Ejecting Cassette 2 Press the :/J button to pause the tape playback. The display shows "PAUSE." 1 Insert a cassette tape into the slot with the open Press again to resume the tape playback. side facing right. 3 Press the Eject (c) button to stop the tape play and eject the cassette. The tape-direction indicator disappears. Dolby B NR (Noise Reduction) When the cassette is loaded, the player (TDM-7586RB/TDM-7584R only) automatically sta
Résumé du contenu de la page N° 14
Cassette Player Operation P.S.UP P.S.DN PROG SCAN f UP DN g Programme Sensor (P.S.) Fast Forward and Rewind 1 Press the P.S. DN button once during tape play 1 Press the DN g or f UP button during to return to the beginning of the current selection tape play to fast rewind or forward the tape being played. respectively. If you wish to return to a selection further back, The tape side indicator ( or ) blinks and >> press repeatedly until the number of selections or << moves indicating the directio
Résumé du contenu de la page N° 15
CD Changer Operation SOURCE DN g f UP -/J Preset buttons Controlling CD Changer (Optional) Music Sensor (M.S.) Skip 1 Press the DN g button once to return to the If an optional Alpine 6-disc CD Changer (M-Bus) beginning of the current track. is connected to the 8-pin DIN connector of the If you wish to return to the beginning of a track TDM-7586RB/TDM-7584R/TDM-7582R you can further back, repeatedly press until you reach the control the CD Changer using the TDM-7586RB/ desired track. TDM-7584R/
Résumé du contenu de la page N° 16
CD Changer Operation SOURCE TITLE F Preset buttons M.I.X. REPEAT DN g SCAN f UP Repeat Play on Single Track or M.I.X. (Random) Play Entire Disc 1 Press "F" button. The function indicator at the top side of the "F" 1 Press the "F" (Function) button. button will turn off. The function indicator at the top side of the "F" 2 Press the M.I.X. button while the CD is playing or button will turn off. in the Pause mode. The M.I.X. indicator will appear in the display. 2 Press the REPEAT button to displa
Résumé du contenu de la page N° 17
To Display CD Titles 6 Repeat the steps 4 and 5 above to complete the titling. Entering the eighth character, (TDM-7586RB/TDM-7584R only) automatically stores the title into memory. When entering a title of less than 8 characters Titles can be displayed for the CDs with titles (for example, 3 character title): entered. After entering 3 characters to complete your title, (Refer to page 15 to title discs.) the 4th character space will be blinking. Go to step 7 to complete the title. 1 Press the TI
Résumé du contenu de la page N° 18
Remote Control Operation 1 2 5 Remote control sensor 6 7 8 9 ! 3 " 4 # 8 g DN Button Controls on Remote Control Radio mode: SEEK (DN) Button (TDM-7586RB/TDM-7584R only) CD changer mode: Press the button to go back to the beginning of the current track. 1 Power Button Tape mode: Press the button during tape play to Press the button to turn the power on/off. fast rewind the tape respectively. 2 Source Button 9 f UP Button Press to select the audio source. Radio mode: SEEK (UP) Button CD changer m
Résumé du contenu de la page N° 19
Battery Replacement Applicable battery: Use two “AAA” sized dry batteries or equivalent. 1 Opening the battery cover Slide out the battery cover while firmly pressing the direction of arrow. 2 Replacing the battery Put the batteries in the case observing the polarities as illustrated. 3 Closing the cover Push the cover as illustrated until a click is heard. 17-EN
Résumé du contenu de la page N° 20
Information Cassette In Case of Difficulty Tape playback sounds dull. • The tape head needs cleaning. If you encounter a problem, please turn the power - Clean the tape head. off, then on again. If the unit is still not functioning • Incorrect Dolby NR in use (TDM-7586RB/TDM- normally, please review the items in the following 7584R only). checklist. This guide will help you isolate the - Check Dolby NR switch setting. problem if the unit is at fault. Otherwise, make sure the rest of your system
