Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
Table of Contents Table of Contents -------------------------------------------------------- -----1 Thank You----------------------------------------------------------------- -----2 Energy Saving Tips------------------------------------------------------ -----2 Notes------------------------------------------------------------------------ -----2 Technical Specifications------------------------------------------------------3 Safety Precautions-------------------------------------------------
Résumé du contenu de la page N° 3
Thank You Thank you for purchasing an Koldfront portable air conditioner. It should provide you with years of reliable cooling. Among other features, this versatile unit exhausts all the condensate that it extracts from your air. Additionally, this portable air conditioner features auto restart. If power to the unit is interrupted, the unit “remembers” its previous settings when power is restored. In order to properly use all features of this portable air conditioner, please read this owner
Résumé du contenu de la page N° 4
Technical Specifications Model PAC9000W Electrical Power Supply 115 Volts / 60 Hertz Rated Power Consumption During Cooling See Label on Unit Dehumidification Capacity 38 Pints per 24 Hours Refrigerant R22 Refrigerant Load 500g Fan Speeds 2 Airflow (H/L) 200/150 CFM Noise Level 52dB(A) Dimensions (HxWxD) 31.42"x14"x13.82" Net Weight 55 Pounds Timer 0.5-24 hours Notes: 1) The above data were obtained in the following conditions: Cooling conditions: Dry bulb/Wet bulb: 95/75°F a
Résumé du contenu de la page N° 5
Safety Precautions C A B 1. Do not insert anything into the grill (Fig. A.) 2. Make sure all children are properly supervised around this portable air conditioner (Fig. B.) 3. Do not use an excessively wet cloth or industrial solvents to clean this unit (Fig. C.) 4. Do not damage the power cord (Fig. D.) 5. Do not use the portable air conditioner in the presence of flammable substances or vapors such as alcohol, insecticides, gas, etc (Fig. D.) 6. Do not yank on the power cord or place
Résumé du contenu de la page N° 6
10. Make sure the portable air conditioner is connected to a grounded power outlet. 11. This portable air conditioner is designed to operate in an ambient temperature of 64°-100° F. 12. This portable air conditioner has been designed for residential use. 13. Always turn the portable air conditioner off before unplugging it. 14. Do not use this portable air conditioner for functions other than those described in this owner’s manual. 15. Do not tilt the portable air conditioner. 16. Do not
Résumé du contenu de la page N° 7
Parts and Accessories 1) Parts Operati on Panel Ai r Inl et Ai r O ut l et Ai r Filter C ont r ol Si gnal Receptor Hot Ai r Di schargi ng Port Use to connect ai r hose. Ai r Inl et for condenser si de Upper Drai n Port Down Drai n Port Ca st e r 6
Résumé du contenu de la page N° 8
2) Accessories Exhaust Duct Indoor Terminal End Wi ndow Ki t Adapter Window Ki t Mai n pi ece Water Drai n Hose Installation When you use this portable air conditioner as an air conditioner or a dehumidifier, the hot air should be exhausted out of the room. When the unit is operating in fan-only mode, no exhaust is required. You do not need to hookup the window kit and hot air exhaust hose when you use the unit as a fan. If you use this portable air conditioner in cooling mode without ve
Résumé du contenu de la page N° 9
1) Exhaust Hose Installation The exhaust hose must be installed onto the unit before any further installation can occur. a) Pull out about 6” of one end of the exhaust hose. b) Screw the exhaust connector onto the exhaust hose in a clockwise motion. c) Snap the exhaust connector into place in the back of the unit. See below for a few notes about exhaust hose installation: Note: Mounting the exhaust hose The suppl i ed exhaust hose can be extended from 16 i nches to 63 i nches l ong
Résumé du contenu de la page N° 10
2) Window Installation a) Make sure the exhaust hose is properly installed onto the portable air conditioner as described above. b) Pull out about 6” of the free end of the exhaust hose and install the window kit adapter onto the exhaust hose by screwing it on in a clockwise manner. c) Open your window about 5”. d) Adjust the length of the window kit to the same width (or length) of the window. If necessary, the window kit can be cut to size. e) Place the window kit in your window, wit
Résumé du contenu de la page N° 11
b) Make a hole of 5 1/8” diameter in your wall. c) Position the portable air conditioner near the hole. d) Feed as much exhaust hose as is needed through the hole. Notes: Be sure to cover the hole when it is not being used by the portable air conditioner. Be sure to have a qualified person make the hole to avoid the possibility of injury or of unintended damage to your room. Operation 1) Control Panel Power Indi cator Ti mer Indi cator Operati on Mode Di spl ay Water Ful l Indi cator W
Résumé du contenu de la page N° 12
“On Timer” can be used to turn the unit on after a set time. When the unit is on, the “Off Timer” can be used to turn the unit off after a set time. How to set the Off Timer: Hr When the unit is on, press the Timer button. “ ” will flash in the timer display and the timer indicator will light up. Press the “ ” or “ ” buttons while the number is flashing to select the time delay. You may set the unit to turn off in 0.5 hours to 24 hours, in 0.5 hour increments. 10 seconds after you last pre
Résumé du contenu de la page N° 13
2) Control Panel Key Fahrenhei t tem p Auto m ode Centi grade tem p Soft-dry m ode WATER LEVEL Cool i ng m ode Water-Ful l Indi cator Fan-onl y m ode 3) Remote Control FAN SPEED O N/ O FF TEM P/ TI M E TI M ER M O DE The six buttons on the remote control are same as the six buttons on the control panel of the main unit. See the control panel section above for an explanation of how to use the buttons. The remote control uses a lithium battery model CR2025. The battery must be installed
Résumé du contenu de la page N° 14
temperature in the room. If the ambient temperature is higher than 81°F, the unit will operate in Cooling mode. If the ambient temperature is below 81°F, the unit will operate in Fan-only mode. Note: The exhaust hose must be attached for proper operation in Auto mode. Dehumidifying 1) Plug the power cord into a power outlet. 2) Turn on the unit. 3) Press the Mode button until the icon “ ” appears in the display. During the Dehumidifying mode, the unit will condense water out of the air
Résumé du contenu de la page N° 15
Fan-only mode does not require that the exhaust hose be attached. 4) Water Drainage All air conditioners dehumidify the air as they cool. This portable air conditioner is designed to evaporate and exhaust this condensed water (sometimes called condensate). When using the Cooling or Dehumidifying modes under extremely humid conditions, the internal water tray may fill completely. If this happens, the Water Level indicator on the control panel will light and the compressor will shut off (so
Résumé du contenu de la page N° 16
Turn the unit off. Pull out the rubber stopper from the upper drain port. Connect a drain hose to the upper drain port (these hoses can commonly be found in hardware stores.) Put the other end of the drain hose in a bucket. Turn the unit back on. The internal drain pump will pump water into the bucket. When the flow of water stops, you can turn off the portable air conditioner. Remove the drain hose and reinsert the rubber stopper. The unit will now be almost completely drained. If you were
Résumé du contenu de la page N° 17
3) Long Term Storage Down Drai n Port 1) On a warm day, run the unit in Fan-only mode for a few hours to exhaust all condensate and to completely dry out the interior. 2) Turn off the unit and unplug it. 3) Empty any residual condensate water by unplugging the lower drain port and allowing any water accumulated there to drain out. Reinstall the rubber stopper after doing this. 4) Detach the exhaust hose and collapse it to its smallest size. 5) Take out the filter. Clean and dr
Résumé du contenu de la page N° 18
Troubleshooting Problem Possible Cause Solution There was a power failure Restore the power supply The plug is not correctly inserted Insert the plug correctly into the into the socket socket Flip the switch, change the fuse, or turn the breaker back on. Also The automatic switch, line fuse, note that you may have too many or breaker has been tripped appliances drawing power on one The portable air conditioner does circuit, so you may need to move not turn on some onto ano
Résumé du contenu de la page N° 19
Make sure there is at least 20" of not very cold, or the airflow The air intake is obstructed clearance from the air intake (on volume is weak the front of the unit) Make the exhaust duct as short as The exhaust duct is too long possible Check the exhaust duct. Remove The exhaust is obstructed any obstructions The unit is set in dehumidifying Set the unit in cooling mode mode The unit is set to low fan speed Set the unit to high fan speed Close all windows and doors into Windows
Résumé du contenu de la page N° 20
NO CO M Other issues Various factors Call for service Circuit Diagram Water Level Fan Motor For 8C De t e ct o r Condenser Si de R oom LCD Di spl ay Tem per at ur e Sensor C1 Mai n Control HO PC B LO Cut - of f Bump O per at i on W ATER Panel PCB 3C PU M P HI C3 LI Receptor PCB L POW ER Motor For Cut - of f Evaporator Si de N SU PPLY AC - N AC - N 0 AC - N 1 M ai n G Control l er PCB C Com pr essor Pr o- C1:Runni ng Capaci tor tector For Fan Motor of Condenser Si de Tr ansf or
