Instruction d'utilisation POSIFLEX Business Machines CR-2200

Résumé du contenu de la page N° 1

CR-2200 SERIES


CASH DRAWER

USER’S MANUAL

Rev. A0
FCC Notes:
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause interference
to radio communications. It has been tested and found to comply with limits for a Class
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection a

Résumé du contenu de la page N° 2

BRIEF INTRODUCTION INTRODUCTION The CR-2200 series is a flip-top type cash drawer. It provides Aluminum alloy die cast case and wearproof stainless steel top surface with zero externally accessible screw. FEATURES Flip-top design Contemporary style with regular width of 460 mm and flat side surfaces Rugged design with no screw to be accessed from outside Aluminum alloy die cast case (both top and bottom covers) Advanced electronics that extends the MTBF (Mean Time Between

Résumé du contenu de la page N° 3

CARTON CONTENTS 1. Cash drawer pre-assembled. 2. User’s manual. 3. Separators of coin compartment: 5 pcs. 4. Key 2pcs: There is a key serial No. sticker on the cash drawer bottom side. If user lost the key he/she can order the key according to this number. 5. Signal Cable depend on model a). For CR-2200: The standard signal cable is 21863018010 which has a 8 pin modular plug at one end to connect to the cash drawer and a 6 pin modular plug at the other end to connect to the POS syste

Résumé du contenu de la page N° 4

INSTALLATION Coin compartment adjust: Open the top cover and remove any protective materials such as a piece of PE foam if it exists. The coin compartment separator can be removed from and inserted till click into the grooves in adjustable coin compartment zones for appropriate compartment size. Coin Compartment Separator Adjustable Coin Compartment CR-2200: 1). Connect the 8 pin plug of CR cable to cash drawer and the 6 pin plug to CR port of POS system or POS print

Résumé du contenu de la page N° 5

power adaptor into the correct power outlet. Insert the output plug to the power jack at rear side of CR-2204 to supply power for drawer kickout. 3). Turn the keylock to standby position. 4). Set the communication protocol of the RS232 port in host system to use baud rate of either 9600 bps or 19200 bps. Rear View RJ9 (4P4C) modular Jack USB Type B Connector AC 12V I/P Connect to Adaptor USB Cable: RS232 Conversion Cable: (21863150800/21863250800) (21863159900/21863259

Résumé du contenu de la page N° 6

can find a control board in the bottom. The lay out of the control board is illustrated below. 4 3 2 1 JP1 O N 2). By switch setting at different positions of JP1, interface selection between RS232 and USB and PID selection can be made. a. Interface select: switch position 1 of JP1 defines interface of the cash drawer besides the interface cable used. When switch position 1 is ON, the controller responds to RS232 signals. When switch position 1 is OFF, the cash drawer w

Résumé du contenu de la page N° 7

FUNCTIONAL TEST CR-2200 1. Follow the printer’s manual of the printer the cash drawer is connected to open cash drawer. 2. If the cash drawer is connected to a Posiflex POS system, follow the technical instruction of the system to open the cash drawer. CR-2204 1. Under DOS prompt, type “MODE COM1 9600 N 8 1”. Hit the ENTER key. 2. Type “TYPE CON>COM1”. Hit the ENTER key. 3. Type “CTRL-G” (Press Ctrl and G keys together). Hit the ENTER key, then the drawer will open and pass the test

Résumé du contenu de la page N° 8

SPECIFICATIONS MECHANICAL: Dimensions: 460 (W) x 174.9 (D) x 101.5 (H) mm 18.2” (W) x 6.9” (D) x 4.0” (H) Weight: 4.2 Kg Removable tray with a lock-on cover (option) ELECTRICAL: Power Source Solenoid Drive (for CR-2200) Pulse Amplitude 12 to 24 VDC Pulse Width 100 to 250 msec Pulse Duty Cycle 10% max. Max. Current Consumption 0.75A @ 12 VDC / 1A @ 24 VDC AC Adaptor (for CR-2204/2205) Input Voltage 120 VAC ± 10 % / 240 VAC ± 10 % @50 -60 Hz Output Voltage 12 VAC at 1.5

Résumé du contenu de la page N° 9

KEYLOCK OPERATION Lock ( ): Physically lock the drawer. Open ( ): Open the drawer by the key. At this position the key can’t be extracted and will be automatically springed away once released. Keylock Standby ( ): Automatically open the drawer by POS printer or POS system or interface signal control STRUCTURE Check Slot Inside CR- 2200/ 2204/ 2205 Adjustable Bill compartment Adjustable coin compartment Cash Tray

Résumé du contenu de la page N° 10

T31454 Part 10