Instruction d'utilisation Marshall electronic V-R65P-HD

Résumé du contenu de la page N° 1

10 Switch Settings, Functions and Indicators
Marshall Electronics
Tally Indicators
1910 East Maple Ave.
El Segundo, CA 90245
Tel.: 800-800-6608 • Fax: 310-333-0688
www.LCDRacks.com
Email: sales@lcdracks.com
V-R65P-HD
U User sers s Guide Guide
Power On/Off Input Source selectors. Screen adjustments
Function Control Table
selection switch Selected source will TINT adjust is not
Illuminates Red illuminate the indicator. available for PAL, Digital,
BUTTON FUNCTION
when power is applied. F

Résumé du contenu de la page N° 2

Analog Component High Definition Video, Standard Definition Video or Computer VGA to UGA Connector - Pin Assignment TABLE-1 1 Product Overview Type HD Analog color difference SD Analog color difference HD or SD Analog RGB VGA to UXGA The V-R65P-HD is the perfect solution for HDTV or SD Wide Screen portable monitor applications. The unit offers YPbPr Y, R-Y, B-Y (Sync on Green) a flexible input configuration without the need of special adapter boxes. There are Standard inputs

Résumé du contenu de la page N° 3

Optional Accessories (continued) 8 Operational Setup 1. Unpack the V-R65P-HD and accompanying V-PS12-5V-1 power supply. Physically inspect for any damage that may Use to replace damaged or scratched protective have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800- Replacement V-R65-RPS cover for screen Protection Screen 6608. If you are not located within the continental united states call +1 310-333-0606. 2. Connect required cables

Résumé du contenu de la page N° 4

V-R65P-HD shown with side mount confi guration of V-R65-BA adaptor 5 Electrical Specifi cations and IDX-E50S battery installed Display (Viewing Area) 6.5” (5.67”H × 3.10”V) (144.0mm x 78.24mm) Viewing Angles 130°H x 120°V IDX-E50S Resolution (RGB Dots) 800H x RGBx480V (1.2 million pixels) V-R65-BA Contrast Ratio 400:1 Dot Pitch 0.163 mm Pixel Response <25ms Brightness 400 cd/m² System NTSC/PAL auto recognition for composite video Composite with loop (BNC) Inputs HDSDI/SDI with re-clocked outpu