Résumé du contenu de la page N° 1
VN-V25U_EN.book Page 1 Friday, November 9, 2007 10:30 AM
IP CAMERA
START-UP GUIDE
VN-V25U
For Customer Use:
Thank you for purchasing this JVC product.
Enter below the Serial No. which is located
Before operating this unit, please read the
on the body.
instructions carefully to ensure the best
Retain this information for future reference.
possible performance.
Model No. VN-V25U
Serial No.
LST0629-001A
Résumé du contenu de la page N° 2
VN-V25U_EN.book Page 2 Friday, November 9, 2007 10:30 AM Getting Started Safety Precautions Information for Users on Disposal of Old Equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in accordance wi
Résumé du contenu de la page N° 3
VN-V25U_EN.book Page 3 Friday, November 9, 2007 10:30 AM ● This installation should be made by a Due to design modifications, data given in this qualified service person and should conform instruction book are subject to possible change to all local codes. without prior notice. ● This installation shall be in accordance with the National Electrical Code, ANSI/NFPA 70. WARNING: ● The unit is to be powered by an AC 24 V TO REDUCE THE RISK OF FIRE OR power supply. ELECTRIC SHOCK, DO NOT The
Résumé du contenu de la page N° 4
VN-V25U_EN.book Page 4 Friday, November 9, 2007 10:30 AM Getting Started These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Résumé du contenu de la page N° 5
VN-V25U_EN.book Page 5 Friday, November 9, 2007 10:30 AM Setting Using Internet Explorer Contents T For “Setting Using Internet Explorer”, please refer to the “Instructions” (pdf) in the supplied Getting Started ................................... 2 CD-ROM. Safety Precautions ..................................... 2 Main Features ............................................. 6 Operation ..........................................29 Operating Environment ............................... 7 Opera
Résumé du contenu de la page N° 6
VN-V25U_EN.book Page 6 Friday, November 9, 2007 10:30 AM Getting Started Built-in JPEG and MPEG4 Viewer Main Features Monitoring of JPEG and MPEG4 images via a computer is possible by downloading the built-in High Picture Quality viewer onto the computer. The camera unit of this product employs a 330,000-pixel CCD (1/4") which enables high Analog Monitor Signal Output (For quality video surveillance. Installation) This product comes with an analog video Support for Dual Stream m
Résumé du contenu de la page N° 7
VN-V25U_EN.book Page 7 Friday, November 9, 2007 10:30 AM Operating Environment Cautionary Notes Recommended Computer Maintenance and location of use Specifications This product is intended for use indoors. OS : Windows XP (Professional or Make sure that you use a housing when Home Edition) (SP2) using it outdoors. CPU : Pentium4 1.5 GHz or higher Do not place this product in the following Memory capacity environments. : 1 GB or more Otherwise, it may malfunction or break down. ● Ho
Résumé du contenu de la page N° 8
VN-V25U_EN.book Page 8 Friday, November 9, 2007 10:30 AM Getting Started If a high luminance object (such as a lamp) is Saving Energy shot, a white smear may appear at the upper and lower ends of this object on the screen. When this product is not in use for a long This phenomenon (smear) is characteristic of period of time, turn off the power of the solid-state image sensors, and is not a system to ensure safety and reduce power malfunction. consumption. Some hubs/switches of p
Résumé du contenu de la page N° 9
VN-V25U_EN.book Page 9 Friday, November 9, 2007 10:30 AM Name and Function of Parts Front / Bottom / Side A H G B F E C D I A Back Focus Adjustment Ring Use screws with a length between 5 mm to This ring is used for back focus adjustment and 7 mm. Screws beyond the specified length may damage the interior, while those shorter than switching the lens mount method. To operate, loosen the H back focus fastening specified may cause the camera to fall off, and therefore these must not be used.
Résumé du contenu de la page N° 10
VN-V25U_EN.book Page 10 Friday, November 9, 2007 10:30 AM Getting Started Side / Rear Q JK P 1 2 G 21 21 MONITOR OUT PAL OFF NTSC RESET AC24V ALARM STATUS R MONITOR OUT 10BASE-T/ IRIS SEE INSTRUCTION MANUAL 100BASE-TX CAUTION : NEVER USE PoE AND AC 24V AT THE SAME TIME DO NOT CONNECT TO THE TELEPHONE NETWORK PUSH M L N O J [MONITOR OUT] Monitor Output Selection Note: Switch You can adjust the [LED State] settings via the Use this switch t
Résumé du contenu de la page N° 11
VN-V25U_EN.book Page 11 Friday, November 9, 2007 10:30 AM Surveillance via Dual Stream Features Simultaneous distribution of JPEG and MPEG4 Surveillance Using the Built-in Viewer images enables real-time surveillance using MPEG4 (30 fps) and recording of JPEG images VN-V25U comes with a built-in ActiveX JPEG at the same time. You can also lengthen the Viewer and MPEG4 Viewer. recording time by lowering the frame rate, JPEG images and MPEG4 images of VN-V25U resolution, and picture qualit
Résumé du contenu de la page N° 12
VN-V25U_EN.book Page 12 Friday, November 9, 2007 10:30 AM Getting Started Alarm Setup Procedures Step 1 Connection/Installation VN-V25U comes with a motion detection feature and dual alarm input. (A Page 14) By motion detection or alarm input, actions such as mail delivery, message transmission via TCP/ Connect the lens mount, power supply cord, UDP, alarm output can be triggered. These LAN cable and alarm. actions can also be triggered by combination of Next, mount the camera to the
Résumé du contenu de la page N° 13
VN-V25U_EN.book Page 13 Friday, November 9, 2007 10:30 AM Connection / Installation 2. Turn the lens in the clockwise direction to Mounting the Lens mount it to the camera firmly 1. Check the mounting method of the lens to 3. When using a DC iris lens, pay attention be used before mounting to the pin position before connecting the ● The default method used for this camera is lens cable CS mount. To use a C mount lens, loosen the back focus fastening screw using a screwdriver, followed
Résumé du contenu de la page N° 14
VN-V25U_EN.book Page 14 Friday, November 9, 2007 10:30 AM Connection / Installation Power Connection Electricity can be supplied to this product either MONITOR OUT PAL OFF NTSC RESET by using the PoE or connecting to the AC 24 V power supply. STATUS When power is supplied to this product, the [STATUS] indicator at the side lights up. The indicator lights up in orange color during IRIS startup, and switches to green color after startup is complete. Caution:
Résumé du contenu de la page N° 15
VN-V25U_EN.book Page 15 Friday, November 9, 2007 10:30 AM ● When a two-core VVF (vinyl insulated vinyl Connecting to the AC 24 V power sheath cable) is used, the connection supply distance is as follows. (Reference value) Connect this product to the AC 24 V power Maximum 150 400 630 supply when the PoE is not used. Extension (m) Caution: Conductor R1.0 R1.6 R2.0 ● Make sure to select only one mode of Diameter (mm) and and and electric
Résumé du contenu de la page N° 16
VN-V25U_EN.book Page 16 Friday, November 9, 2007 10:30 AM Connection / Installation LAN Cable Connection Monitor Signal Output Terminal Connection Connect the camera to a hub or computer using a LAN cable. This terminal is used for adjusting the camera angle during installation. Connect it to devices Cable to use such as a video monitor using a video cable ● Shielded cable (RCA). ● Length of 100 m or shorter When connecting to a hub 1 2 G 21 21 Make use of a straight cable. When conn
Résumé du contenu de la page N° 17
VN-V25U_EN.book Page 17 Friday, November 9, 2007 10:30 AM Sensor Example VN-V25U Alarm Input/Output Terminal (1) DC3.3 V INPUT 1 or VCC Connection 2 Terminal R R OUT Connect the alarm input/output terminals with external devices, such as a sensor or buzzer. 3.3 V 1mA Plug/Unplug the cable while pressing the button as shown in the diagram below. G Terminal GND (Alarm Input Equivalent Circuit) Cable to use Sensor Example (2) ● Shielded cable ● Length of 50 m or shorter Relay Switch, etc.
Résumé du contenu de la page N° 18
VN-V25U_EN.book Page 18 Friday, November 9, 2007 10:30 AM Connection / Installation Mounting the camera mounting Mounting the Camera bracket on the top of the camera Use the screw hole on the camera mounting bracket to mount this camera to a fixer or Camera rotating platform. Mounting Bracket Camera Mounting Camera Mounting Screw Hole Bracket Fastening Screw 1/4-20UNC (2 pcs: M2.6 x 6 mm) Caution: ● When mounting the camera, use scr
Résumé du contenu de la page N° 19
VN-V25U_EN.book Page 19 Friday, November 9, 2007 10:30 AM Mounting to the Housing Warning Using the Inner Tripod Base ● Special attention is required when mounting the camera to a wall or ceiling. Users This product comes with an inner tripod base at should get professional contractors to the bottom surface. You can use the inner tripod perform mounting operations instead of base by removing the camera mounting bracket doing it themselves. Failure to do so may that is attached to the
Résumé du contenu de la page N° 20
VN-V25U_EN.book Page 20 Friday, November 9, 2007 10:30 AM Connection / Installation Inner Tripod Base Mounting Screws Fixed focus lens Make use of 1/4-20UNC screws. The length of Adjust when the lens cannot be brought into the mounting screw shall be between 6 mm to focus using the focus ring. 7 mm from the mounting surface. 1. Loosen the back focus fastening screw by Caution: using a Phillips screwdriver and turning it in ● Using a scr
