Résumé du contenu de la page N° 1
USER MANUAL
ENGLISH
Thank you very much for choosing the iiyama LCD monitor.
We recommend that you take a few minutes to read carefully
through this brief but comprehensive manual before
installing and switching on the monitor. Please keep this
manual in a safe place for your future reference.
Résumé du contenu de la page N° 2
FCC DECLARATION OF CONFORMITY Model Number: PLL403W / PLL323W Trade Name: iiyama Responsible party: IIYAMA North America, Inc. Address: 65 West Street Road, Suite 101B, Warminster, PA18974 U.S.A. Telephone number: 215-682-9050 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operatio
Résumé du contenu de la page N° 3
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock. DO NOT PUT ANY OBJECT INTO THE MON
Résumé du contenu de la page N° 4
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitors and do not indicate a problem. When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is NOTE used. In this case, adjust the picture position to its correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may fin
Résumé du contenu de la page N° 5
BEFORE YOU OPERATE THE MONITOR ProLite L323W: NOTE The top of the monitor may become hot during use. FEATURES ProLite L403W: 40” Wide Screen TFT Color LCD Monitor ProLite L323W: 32” Wide Screen TFT Color LCD Monitor Supports Resolutions up to 1280 × 768 Super Wide Viewing Angle and High Brightness Digital Character Smoothing Automatic Set-up ® Plug & Play VESA DDC2B Compliant, Windows 95/98/2000/Me/XP Compliant ® Power Management (ENERGY STAR and VESA DPMS Compliant) Digital Inpu
Résumé du contenu de la page N° 6
CONTROLS AND CONNECTORS INPUT AUTO MENU Vol Down / Up POWER Top Front Top Auto Button / Return Button Power Switch A NOTE The monitor saves the power ON / OFF setting before the For best results, use the Auto Set-up in conjunction Power Cable is disconnected. with the adjustment pattern. (See page 12 for SCREEN If the monitor is OFF when connecting the Power Cable, ADJUSTMENTS.) press the Power Switch to turn ON the monitor. The Power The screen becomes dark for a while during the Indicator
Résumé du contenu de la page N° 7
Back Back Handles J Speaker Input Terminal K Optional Tuner / Video Adapter Slot L DVI-I 29pin Connector (DVI) M Audio Connector for computer (AUDIO) N External Speaker Output Terminal (SPEAKER) O Audio Output Connector (AUDIO R/L) P AC Connector (AC IN) Q Main Power Switch (POWER) R BEFORE YOU OPERATE THE MONITOR 5 ENGLISH
Résumé du contenu de la page N° 8
SPEAKER INSTALLATION CAUTION Turn off the power switch and unplug the monitor before installation to avoid electric shock or damage. The speaker is heavy. Two person handling is recommended. Install the speaker on a stable surface. The monitor or the speaker may cause injury or damage if they fall or are dropped. Do not give a strong impact to the monitor or speaker. It may cause damage. Speaker Do not push mesh area of speaker strongly to avoid denting it. Bracket Ensure that both t
Résumé du contenu de la page N° 9
CONNECTING YOUR MONITOR CAUTION The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. Turn off the power switch and unplug the monitor and peripherals before connection to avoid electric shock or damage. Ensure that both the computer and the monitor are switched off. A Connect the computer to the monitor with the signal cable. (See page 16 for CONNECTOR PIN
Résumé du contenu de la page N° 10
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 16. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 12 for SCREEN ADJUSTMENTS. Press the Menu Button to start the On Screen Display feature. There are additional menu pages which ( can be switched by using the / Buttons. Select the menu page which contains the adjustment it
Résumé du contenu de la page N° 11
ADJUSTMENT MENU CONTENTS PC Analog / PC Digital Input Picture Control Adjustment Item Problem / Option Button to Press Too dark 1 Brightness * Too bright Too dull Contrast Too intense Too far to the left 2 H Position * Too far to the right Too low 2 V Position * Too high 2 Clock * To correct flickering text or lines 2 Phase * To correct flickering text or lines 1 * Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. 2 * Ava
Résumé du contenu de la page N° 12
Function 1 Adjustment Item Problem / Option Upper Left OSD is displayed at upper left of the screen. OSD Position Upper Right OSD is displayed at upper right of the screen. Center OSD is displayed at center of the screen. Lower Left OSD is displayed at lower left of the screen. Lower Right OSD is displayed at lower right of the screen. Off The picture is displayed at the optimum resolution. Full Screen On Stretch the picture to fit the full screen. Adjust the screen size at resolutions of less t
Résumé du contenu de la page N° 13
Function 2 Adjustment Item Problem / Option Button to Press Adjust the picture quality at resolutions of less than Sharpness 1280 × 768 when selecting “On” at “Full Screen” on Function 1. Mode 1 (≈9300K) Bluish white (Approx. 9300K) *3 Color Control Mode 2 (≈7500K) Yellowish white (Approx. 7500K) Mode 3 (≈6500K) Reddish white (Approx. 6500K) Red User Too weak Green Too strong Blue No Return to the adjustment item line. *4 Auto Balance Yes Adjust the Red, G
Résumé du contenu de la page N° 14
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting PC Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. The monitor is designed to provide the best performance at resolution of 1280 × 768, but can not provide the best at resolutions of less than 1280 × 768 because the picture is automatically stretched to fit the full scre
Résumé du contenu de la page N° 15
2) Stretch the right side of the picture frame to the right edge of the display area by adjusting the Clock. NOTE When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2). Another way to make the Clock adjustment is to correct the vertical wavy lines in the zebra pattern. The picture may flicker during the Clock, H Position and V Position adjustment. In case the picture frame is bigger or smaller than t
Résumé du contenu de la page N° 16
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3. If you are experiencing a problem which is not described below or you cannot correct the problem, di
Résumé du contenu de la page N° 17
APPENDIX A SPECIFICATIONS ProLite L403W ProLite L323W LCD Driving system a-Si TFT Active Matrix Panel Size Diagonal: 101cm / 39.6" Diagonal: 80.2cm / 32" Pixel pitch 0.6735mm H × 0.6735mm V 0.537mm H × 0.537mm V 2 Brightness 500cd/m (Typical) Contrast ratio 600 : 1 (Typical) 500 : 1 (Typical) Viewable angle Right / Left / Up / Down: 85 degrees each Response time 22ms (Black, white, black) 33ms (Black, white, black) Display Colors 16,777,216 maximum Sync Frequency Horizontal: 31.47-60.24kHz, Ve
Résumé du contenu de la page N° 18
ProLite L323W 978mm/38.5" 778mm/30.6" 136mm/5.4" 690mm/27.2" 560mm/22.0" 300mm/11.8" COMPLIANT TIMING Horizontal Vertical Video Mode Dot Clock Frequency Frequency 1 31.469kHz 59.940Hz 25.175MHz * VGA 37.861kHz 72.809Hz 31.500MHz 640 × 480 37.500kHz 75.000Hz 31.500MHz 1 37.879kHz 60.317Hz 40.000MHz * SVGA 800 × 600 48.077kHz 72.188Hz 50.000MHz 46.875kHz 75.000Hz 49.500MHz VESA 1 48.363kHz 60.004Hz 65.000MHz * XGA 1024 × 768 56.476kHz 70.069Hz 75.000MHz 60.023kHz 75.029Hz 78.750MHz 44.409kHz 56.00
Résumé du contenu de la page N° 19
APPENDIX B Optional TUNER / VIDEO Input APPENDIX B is available only when the optional Tuner / Video Adapter is installed in the monitor. For more details, please refer to the user manual for the optional Tuner / Video Adapter. REMOTE CONTROL CAUTION Do not use any other batteries other than those specified in this manual for the Remote Control. Do not insert old and new batteries together in the Remote Control. Make sure that the terminals match the “+” and “–” indications in the battery comp
Résumé du contenu de la page N° 20
SLEEP I Turn off the monitor automatically after selected period of time when antenna is connected. This is switched when you successively press the button as follows: 30min 60min 120min 0min(Off) DISP J Following information is displayed on the screen. Computer connection: Input signal timing Antenna connection: Channel number, Sound setting 1/2 K This is switched when you successively press the button as follows: Stereo broadcasting: Mono Stereo NICAM Stereo broadca
