Résumé du contenu de la page N° 1
POW ER PLAY STOP EJECT
VOD705
PROV710 /
PROV710 S /
ON OFF AUTO
PROV 710 P
DROP-DOWN VIDEO
MONITOR WITH BUILT-IN
DVD PLAYER
®
ELECTRONICS CORP.
128-6743
Date: 12/05/2003
128-6743
1 of 26
Date: 21/5/2003-PROV710 S & PROV710 P ADDED
Résumé du contenu de la page N° 2
IMPORTANT An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function then the vehicle is in ‘park’ or when the vehicle’s parking brake is applied. An LCD panel
Résumé du contenu de la page N° 3
Features Congratulations on your purchase of the Audiovox • • • • • 7 Inch TFT (Thin Film Transistor) Active PROV710/PROV710 S /PROV710 P DVD Player with Drop-Down Video Monitor. The PROV710/PROV710 Matrix LCD (Liquid Crystal Display) Monitor S /PROV710 P has been designed to give you and • • • • • OSD (On Screen Display) for Control of your family many years of video entertainment in the mobile environment. Please read the directions that Picture Quality and Functions follow to familiarize y
Résumé du contenu de la page N° 4
Controls and Indicators Diagram 1 2 4 POWER PLAY STOP EJECT 3 5 6 6 11 ON OFF AUTO 7 10 8 13 9 Closed Position Open Position -4- 128-6743 4 of 26
Résumé du contenu de la page N° 5
Main Function Descriptions 1. DVD disc insertion slot. 2. Eject ( ) Button – Ejects disc. 3. Stop ( ) Button – Pressing this button will stop playback. 4. Power Button – Bright red when system is on, dim when off. 5. Play ( ) Button – This button is used to enter the play mode. 6. Dome Lights – provide additional interior illumination. 7. Three position Dome Light Switch • Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior illumination. • Off – The
Résumé du contenu de la page N° 6
Remote Control Operation DVD EJECT POW ER 16 1 DISPLAY 2 1 2 3 ANGLE 17 3 4 5 6 4 Battery Installation ZOOM SOURCE AUDIO 5 0 18 6 Before attempting to operate your Remote Control, install the batteries as described below. Enter 7 19 1) Turn the Remote Control face down. Using a MENU SETUP 8 20 fingernail, lift the battery cover off. REPEAT RETURN A-B 2) Install two “AAA” batteries as shown. Make 9 21 10 sure that proper polarity (+ or -) is observed. + 11a 22 3) Align the cover tabs with the r
Résumé du contenu de la page N° 7
DVD Function Descriptions *Function control is available on the unit and the remote control. 1. DVD POWER ON/OFF Button* Press this button to turn the PROV710/PROV710 S /PROV710 P on. Press the button again to turn the PROV710/PROV710 S /PROV710 P off. 2. DISPLAY Button Press to display DVD Disc current information. Press DISPLAY button DVD Player Perform Once TITLE Elapsed Time Twice TITLE Remain Time 3 times CHAPTER Elapsed Time 4 times CHAPTER Remain
Résumé du contenu de la page N° 8
5. AUDIO Button Press to display & select AUDIO language & channel. Each time you press the button, the language or channel changes. Note: The languages & channel you can select are vary from disc to disc. 6. ZOOM Button Press this button to zoom the picture. Press ZOOM button OSD DVD Player Perform Once ZOOM x2 ZOOM picture 2 times Twice ZOOM x3 ZOOM picture 3 times 3 times ZOOM x4 ZOOM picture 4 times 4 times ZOOM x1/2 Reduce picture to 1/2 5 times ZOOM x1/3 Reduce picture to 1
Résumé du contenu de la page N° 9
10. A-B REPEAT Button Allows the user to repeat play of a DVD or CD from point A to point B. 11a. Select Down (-) Button Used this button to make picture adjustments in picture select mode. b. Select Up (+) Button Used this button to make picture adjustments in picture select mode. Description of Adjustment Items:- Item Press Select Down(-) button Press Select Up(+) button CONTRAST Decrease the contrast Increase picture for soft color contrast for vivid color To darken the pi
Résumé du contenu de la page N° 10
13. PIX Button (PICTURE SELECT) Each time this button is pressed, the on screen picture adjustment display the “adjustment bars” for CONTRAST/ BRIGHTNESS, COLOR or TINT. Once the desired adjustment bar is displayed, use the Select up/Select Down buttons to adjust the setting. The display will automatically turn off if no adjustments are made within 6 seconds, or if any other button is depressed. 14. PAUSE ( ) Button DVD disc play will be paused. 15. STOP ( ) Button * DVD disc play will
Résumé du contenu de la page N° 11
20. SETUP Button Allows the user to select the DVD player’s options (Display, OSD Language, Defaults, Parental Control, Password, Exit Setup) 21. REPEAT Button Allows the user to repeat various positions of a DVD, CD or MP3. 22. NEXT ( | ) Button Allows the user to skip to the next chapter or track. 23. PREVIOUS ( | ) Button Allows the user to return to the previous chapter or track. 24. Scan Forward ( ) Button Allows the user to search in a forward direction at 2,4, 6, 8, 16 and 32 ti
Résumé du contenu de la page N° 12
Turning the PROV710/PROV710 S /PROV710 P On or Off 1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The internal friction will hold the screen in position while the system is in use. 2. Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use the internal backlighting will illuminate the controls. 3. After the uni
Résumé du contenu de la page N° 13
Remote Sensor The PROV710/PROV710 S /PROV710 P incorporates POW ER PLAY STOP EJECT an infrared sensor, which will relay signals from the remote control to allow the unit to be controlled simply by pointing its remote control at the remote sensor eye. The repeater function allows control of auxiliary equipment ON OFF AUTO such as an Audiovox Video Cassette Player. The infrared Remote sensor can relay signals from most manufacturer’s Sensor remote controls to its respective component connected t
Résumé du contenu de la page N° 14
AV1 This video input may be connected to a Video cassette Player (VCP), video game system, or other audio / video device. To access the A/V input, turn the PROV710/PROV710 S /PROV710 P on and press the source select button on the PROV710/PROV710 S /PROV710 P or the Source button on the remote control until “AV1” is displayed on the screen. Turn the video source component on with its power button or remote control. The PROV710/PROV710 S /PROV710 P is now ready to play the audio and video signal
Résumé du contenu de la page N° 15
DVD Basics To get the optimum use out of the DVD section, make sure you read this section completely. Regional Coding Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. If the codes don’t match, the disc won’t play. This unit’s code is region 1. Other regional codes cannot be played in this unit. The unit will display “WRONG REGION.” Types of Discs your DVD will play • DVD discs – DVDs discs which contain video. • Audio discs – Au
Résumé du contenu de la page N° 16
Settings and Adjustments This chapter describes how to set and how to adjust using the on-screen SETUP menu. Using the Setup Menu Using the setup menu you can do the initial setup and set the various options. You can also select a language for the on-screen display, the setup display, and limit play back by children. 1) Press the SETUP button to display the “setup menu” on the TV screen. 2) Select the main item you want using the cursor ( ) buttons, and then press the ENTER button. To
Résumé du contenu de la page N° 17
Settings for Display Press the SETUP button and select Display. The DISPLAY SETUP allows you to adjust screen setting (aspect ratio) Press and then use the ( )buttons to select the appropriate settings. 4:3 / PS This displays the wide picture on the screen with a portion of the left & right side removed. 4:3 / LB This displays the wide picture with black bands on the upper and lower portions of the screen. 16:9 This displays a picture with black bands on the
Résumé du contenu de la page N° 18
Settings for Parental (Parental Control) This section of the SETUP Menu allows user to control the content of movie playback from G to NO_PARENTAL. The Parental Control function allows you to limit viewing to your preference. 1. Use the buttons to select G (Children) PG PG 13 R NC-17 ADULT (Adult) NO_PARENTAL (No Parental Control) Note:The lower the value, the more strict the limitation. Press the Enter button to confirm the selection. 2. Input a password in 4
Résumé du contenu de la page N° 19
Settings for Password (Parental Control Password) Press the SETUP button and select PASSWORD. The PASSWORD SETUP allows you to change the parental control password. Press and then press Enter. OLD PASSWORD Input the OLD password or the default password (4 digits) using the numeric buttons NEW PASSWORD Input a NEW password (4 digits) CONFIRM PWD Confirm the new password by entering the same new password again. Then press Enter to implement it. -19- 128-6743 19 of 26
Résumé du contenu de la page N° 20
Playing Audio CDs When playing an audio CD, the DISPLAY Banner appears automatically. It displays the current track , the total amount of tracks, and the amount of the time for the track playing. Press the DISPLAY button on the remote to change the DISPLAY Banner. The options below show you what happens when you press the DISPLAY button. SINGLE REMAIN appears along with the current track playing the and the amount of time left. TOTAL ELAPSED appears along with the current track playing the
