Résumé du contenu de la page N° 1
AUDIOVOX
OWNER' S MANUAL
.... m
VBP4000
VIDEO IN A BAG SYSTEM WITH
DETACHABLE 5.6" LCD MONITOR & DVD PLAYER
1
Résumé du contenu de la page N° 2
A. Introduction Thank you for selecting this “Video in a Bag” System. The system's main features include a 5.6" Liquid Crystal Display (LCD) monitor and a DVD player. The system utilizes the latest state of the art elec- tronics and is designed for use in vehicles, hotels, offices or your home. The “Video in a Bag” System is constructed to provide years of reliable, trouble-free service. The system is compact so that you can take it with you anywhere and is designed for quick and easy installat
Résumé du contenu de la page N° 3
ate the “Video in a Bag” System with the bag open to ensure proper ventilation of the monitor and the DVD player. The system is in- tended to be mounted for rear seat viewing only. Do not use the system in the front seat while operating your vehicle. 3. Power This system MUST be powered from the type of switched (Acces- sory) power indicated on the marking label (i.e. not directly from the car battery). Power should be applied to the unit when the ignition key is in the Run and/or Accessory po
Résumé du contenu de la page N° 4
the disc from the center out with a cleaning cloth. Remove the disc from the unit and store it in its case after playing. Some playback operations of discs may be intentionally fixed by software produc- ers. Since this unit plays discs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the discs. C. Contents 1. 1 x Detachable Monitor & DVD Player Combo 2. 1 x DIN Cable 3. 1 x AC to DC Adapter 4
Résumé du contenu de la page N° 5
2. Powering the system in the vehicle (Refer to Figure 2) Figure 2 Unzip the lower compartment of the bag and take the cigarette lighter adapter. Plug one end into the DC 12V jack on the left side of the main unit, then plug the other end into the cigarette lighter socket. 3. Powering the detached monitor indoors (Refer to Figure 3) Figure 3 The monitor can be detached from the system by depressing the button below the screen with one hand and removing the monitor with the other hand. Take the A
Résumé du contenu de la page N° 6
4.Powering the detached monitor in the vehicle (Refer to Figure 4) Figure 4 Take the cigarette lighter adapter from the lower compartment, plug one end into the DC 12V jack on the right side of the monitor, then plug the other end into the cigarette lighter socket. Note: 1) When the monitor is combined with the main unit, the inside signals including DC 12V power will be supplied from the main unit to the monitor, so there is no need for another power source to be connected to the DC 12V ja
Résumé du contenu de la page N° 7
Figure 5 Figure 6 7
Résumé du contenu de la page N° 8
E. Installation 1.Installing the system onto the seat back in a car (Refer to Figure 7) Figure 7 1) Unfasten the rear Velcro straps of the bag. Fold inwards the rear piece of the bag and attach its end velcro strap to the lower Velcro strap on the back of the bag to form a triangle. 2) Hang the bag onto the seat back by looping the shoulder strap of the bag around the headrest of the seat. 3) Take one of the supplied straps from the lower compartment of the bag, and connect the latch to the low
Résumé du contenu de la page N° 9
5) Unzip the bag and flip down the front flap. Ensure the inside Velcro straps of the bag is fastened to prevent the unit from falling. Swing the monitor upwards and adjust the screen for the desired viewing angle. 2. Installing the system between the driver/passenger seat (Refer to Figure 8) Figure 8 1)Take one of the supplied straps from the lower compartment of the bag, and connect the latch to the upper side or rear (depend- ing on the desired viewing angle) metal ring on the left side of t
Résumé du contenu de la page N° 10
attach the "S" connector to the rail directly, as it may not be long enough to reach back to the ring. 3)Adjust the straps tightly so that the bag is secured. 4) Unzip the bag and flip down the front flap. Ensure the inside Velcro strap of the bag is fastened to prevent the unit from fall- ing. Swing the monitor upwards and adjust the screen for the desired viewing angle. 3. Installing the system on the back seat in a car (Refer to Figure 9) There is no need to remove the four straps from
Résumé du contenu de la page N° 11
4. Installing the detached monitor onto the seat back in a car (Refer to Figure 10) Figure 10 1) Follow the installation instruction shown in Item 1, 2 or 3. 2) Detach the monitor from the main unit by depressing the but- ton below the screen with one hand and remove the monitor with the other hand. Take the pouch from the rear compartment of the bag. Slide the monitor into the pouch, and make sure to feed the bottom piece of the pouch into the long slot at the bottom of the monitor and atta
Résumé du contenu de la page N° 12
5.Placing the system in a hotel/office/home (Refer to Figure 11) Figure 11 1) Just place the system on a table or other level surface with the system bottom facing down. Uncover the monitor and adjust the screen for the desired viewing angle. This can be done with or without the unit inside its bag. You can remove the main unit from the bag by unfastening the inside Velcro strap of the bag. 2) You can detach the monitor from the main unit by depressing the button below the screen with one h
Résumé du contenu de la page N° 13
F. Controls, Indicators, and Connectors 1. Unit View (Refer to Figure 12) Figure 12 13
Résumé du contenu de la page N° 14
1) Brightness Up/Down Thumbwheel 2) Volume Up/Down Thumbwheel 3) Headphone Input Jack # 2 4) Headphone Input Jack # 1 5) S Video Output Jack 6) DVD Video Output Jack 7) DVD Audio L Output Jack 8) DVD Audio R Output Jack 9) Monitor Port # 1 (Output) 10) Monitor Port # 2 (Output) 11) DC 12V Input Jack for Main Unit 12) Video Input Jack for Main Unit 13) Audio L Input Jack for Main Unit 14) Audio R Input Jack for Main Unit 15) Power LED Indicator for Monitor 16) Power Button for Main
Résumé du contenu de la page N° 15
2. Remote Control View (Refer to Figure 13) 1) Power Button 2)Display Button 3) Angle Button 4) Subtitle Button 5) Audio Button 6) Zoom Button 7) Up/Down/Left/Right/Enter Buttons 8) Menu Button 9) Return Button 10) A-B Button 11) Slow Button 12) Pause Button 13) Stop Button 14)Eject Button 15) Number Buttons 16) Setup Button 17) Repeat Button 18) Previous Button 19) Next Button 20) Reverse Button 21) Forward Button 22) Play Button Figure 13 G. Pl
Résumé du contenu de la page N° 16
1. Basic Operation Turn the unit on/off POWER Eject/load the disc EJECT PLAY Start Play/Execute item or setting Play at 1/2, 1/4, 1/8 or 1/16 times speed SLOW Still Picture PAUSE STOP (1 time) Stop at the present playing point / (2 times) Stop playing Go to the next chapter, track or scene dur- NEXT ing play back Go back to the preceding chapter, track or PREVIOUS scene during play back FORWARD Scan forward at 2, 4, 8, or 16 times speed Scan backward at 2, 4, 8, or 16 times speed REVERSE Used fo
Résumé du contenu de la page N° 17
2. SETUP Press ‘SETUP’ to display the Main screen of the SETUP Menu on the screen. Press ‘SETUP’ again to exit the SETUP Menu and the unit will resume it’s last playback or stop mode. Figure 7. Main SETUP Menu Screen 1) Select ‘GENERAL SETUP’ using the UP/DOWN buttons, then press ‘ENTER’ to enter the GENERAL Setup screen. Figure 8. General SETUP Menu Screen a. Select TV DISPLAY using UP/DOWN, and then press RIGHT to enter the submenu. Select the TV display mode on the screen using UP/DO
Résumé du contenu de la page N° 18
* WIDE: When the player is connected to a wide screen TV, a wide picture is shown on the full screen. b. Select ‘ANGLE MARK’ using UP/DOWN, and then press the RIGHT button to enter the submenu. Choose Angle Mark on or off displayed on the screen using the UP/DOWN and then press ENTER to confirm the setting. Press the LEFT button to return. Figure 9. ANGLE MARK Screen Display * ON: The screen will show angle mark. (*If angle option is available) OFF: Th
Résumé du contenu de la page N° 19
2) When there is no disc inside the player select ‘PREFERENCES’ using UP/DOWN, then press ‘ENTER’ to enter the preferences page. Figure 10. AUDIO Preference Screen Display a. Select ‘AUDIO’ using UP/DOWN, then press ‘RIGHT’ to enter the submenu. Select the audio language you desire using UP/DOWN, then press ‘ENTER’ to confirm the setting. Press LEFT to return. b. Select ‘SUBTITLE’ using UP/DOWN, then press RIGHT to enter the submenu. Select the desired subtitle language or SUBTIT
Résumé du contenu de la page N° 20
c. Select ‘DISC MENU’ using UP/DOWN, then press ‘RIGHT’ to enter the submenu. Select the Disc Menu Language you desire using UP/DOWN, then press ‘ENTER’ to confirm the setting. Press ‘LEFT’ to return. Figure 12. DISC MENU Preference Screen Display Note: Language and subtitle selection is only available for discs that are recorded in the above listed languages. If the selected, language is not available, the player will play and display on the screen the original recorded language contained i
