Résumé du contenu de la page N° 1
SyncMaster 225MS
Install driver Install programs
Résumé du contenu de la page N° 2
Notation Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. The images here are for reference only, and are not applicable
Résumé du contenu de la page N° 3
This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.
Résumé du contenu de la page N° 4
Installation Be sure to contact an authorized Service Center when installing your set in a location with heavy dust, high or low temperatures, high humidity, and chemical substances, or where it will be operated for 24 hours continuously such as an airport, train station or etc. Failure to do so may cause serious damage to your set. Put your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause an electric shock or fire inside the monitor.
Résumé du contenu de la page N° 5
Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc. Any increase in internal temperature may cause fire. Set down the monitor carefully. The monitor could be damaged or broken. Do not place the monitor face down. The TFT-LCD surface may be damaged. Installing a wall bracket must be done by a qualified professional. Installation by unqualified personnel may result in injury. Always use the mounting device specifie
Résumé du contenu de la page N° 6
Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. A dirty connector may cause an electric shock or fire. Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, t
Résumé du contenu de la page N° 7
Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle. This may a malfunction, an electric shock or fire. Especially avoid operating the monitor near water or outdoors where the monitor could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact the Service Center. The monitor may cause a malfunction, electric shock or fire. Disconnect th
Résumé du contenu de la page N° 8
This may cause an explosion or fire. Never insert anything metallic into the monitor openings. This may cause an electric shock, fire or injury. Do not insert metal objects such as chopsticks, wire and gimlet or inflammable objects such as paper and match into the vent, headphone port or AV ports or etc. It may cause a fire or an electric shock. If an alien substances or water flows into the product, turn the product off, unplug the power connector from the wall outlet and con
Résumé du contenu de la page N° 9
Dropping the product may cause damage to the product or personal injury. Using the product in a location prone to vibrations may shorten the lifetime of the product or may catch fire. When moving the monitor, turn off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connected to other devices, are disconnected before moving the monitor. Failure to disconnect a cable may damage it and lead to fire or an electric shock. Place the product
Résumé du contenu de la page N° 10
feet fall up from the floor. Adjust the arm position so that it is below the heart Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health
Résumé du contenu de la page N° 11
PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have an image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate a correct usage of LCD products in order to protect them from Image retention. Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty. What is Image retention ? During normal operation of a LCD panel, pix
Résumé du contenu de la page N° 12
Ex) The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns. When the LCD panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be slight difference in voltage between electrodes that work the liquid crystal (LC) in a
Résumé du contenu de la page N° 13
Package Contents Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Without Stand Monitor With Stand Monitor & Simple stand Manual
Résumé du contenu de la page N° 14
Warranty Card, User's Guide, Monitor Driver, Registration Card Quick Setup Guide Natural Color, (Not available in all TM MagicTune locations) Cable Power Cord D-sub Cable Audio Cable Sold separately S-Video Cable RCA Cable Earphones/Headphones Component Cable DVI Cable DVI to HDMI cable HDMI Cable RCA to stereo (for PC) cable This is an accessory that can be added depending on the model. Your Monitor Front
Résumé du contenu de la page N° 15
MENU button [ ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. Adjust buttons [ ] These buttons allow you to adjust items in the menu. PC/DVI : MagicBright™ is a new feature providing optimum viewing environment MagicBright™ button depending on the contents of the image you are watching. Currently six [] different modes are available: Custom, Text, Internet, Game, Sports and Movie. Each mode has its own pre-configured brightness value. You can
Résumé du contenu de la page N° 16
>> Click here to see an animation clip Volume button [ ] When OSD is not on the screen, push the button to adjust volume. >> Click here to see an animation clip Enter button [ ] / Activates a highlighted menu item. / SOURCE button Push the 'SOURCE', then selects the video signal while the OSD is off. (When the SOURCE button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode -- PC, DVI, HDMI, AV, S-Video and Component inpu
Résumé du contenu de la page N° 17
HDMI/D-SUB HDMI : Connect the HDMI terminal at the back of your monitor to the HDMI terminal of your digital output device using a HDMI cable. D-SUB : Connect the RGB terminal at the back of your monitor to your computer. S-VIDEO / VIDEO / R - AUDIO - L R - AUDIO - L : External device sound input termina VIDEO : External device (video) input terminal S-VIDEO : External device (S-video) input terminal PC IN DVI-D : Connect the DVI-D terminal a
Résumé du contenu de la page N° 18
Headphone output terminal Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchase it. See Connecting Cables for further information regarding cable connections.
Résumé du contenu de la page N° 19
Connecting Cables Connecting to a Computer Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer. Using the D-sub (Analog) connector on the video card. - Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ D-SUB ] Using the DVI (Digital) connector on the video card. - Connect the DVI Cable to the DVI-D Port
Résumé du contenu de la page N° 20
Connected to a Macintosh. Connect the monitor to the Macintosh computer using the D-sub connection cable. [ RGB ] Connecting to Other devices This monitor allows the user to connect it to such input devices as a DVD player, a VCR or a camcorder without disconnecting the PC. The configuration at the back of the monitor may vary from product to product. Connecting AV Devices The monitor has AV connection terminals to connect AV input devices like DVD, VCR or Camcorder. You m
