Résumé du contenu de la page N° 10
RADIO MODE ➮ press the SRC button = re- Radio mode peatedly until the memory bank Adjusting the tuner settings (e.g. “FM1”) appears in the dis- play. To ensure that the tuner works proper- ly, the device must be configured for RDS functions the region in which it is being used. You This device is equipped with an RDS can choose between Europe (EU- radio receiver (Radio Data System). ROPE), United States (USA), South Many of the receivable FM stations America (S-AMERICA) and Thailand broadcast a
Résumé du contenu de la page N° 11
RADIO MODE Switching the RDS function on/off Tuning into a station If you want to use the RDS functions There are various ways of tuning into (AF and REGIONAL), a station. ➮ press and hold down the TRAF Automatic station seek tuning RDS button : for longer than two ➮ Press the or button 8. seconds. The radio tunes into the next receiva- The RDS function is active when the ble station. RDS symbol is shown in the display. Tuning into stations manually Switching REGIONAL on/off You can also tune
Résumé du contenu de la page N° 12
RADIO MODE Setting the sensitivity of station Storing stations automatically seek tuning (Travelstore) You can choose whether the radio You can automatically store the six sta- should only tune into stations provid- tions providing the best reception in the ing good reception or whether it can region (only FM). The stations are also tune into those with a weak re- stored in the FMT memory bank. ception. Note: ➮ Press the MENU button 7. Any stations previously stored in ➮ Press the or button
Résumé du contenu de la page N° 13
RADIO MODE Scanning begins. “SCAN” appears You can use the PTY function to se- briefly in the display followed by a flash- lect stations of a particular programme ing display of the current station name type. or frequency. PTY-EON Cancelling SCAN and continuing If you specify the programme type and listening to a station start seek tuning, the radio will switch from the current station to a station of ➮ Press the MENU button 7. the selected programme type. Scanning stops and the radio contin- ue
Résumé du contenu de la page N° 14
RADIO MODE ➮ Press the or button 8 to Optimising radio reception switch PTY ON or OFF. HICUT ➮ Press the MENU button 7. The HICUT function improves recep- tion during poor radio reception (only Selecting the PTY language FM). If interference occurs, the inter- You can select the language in which ference level is cut automatically. the programme types are displayed. Switching HICUT on/off The following are available: “DEUTSCH”, “ENGLISH” and ➮ Press the MENU button 7. “FRANÇAIS”. ➮ Press the
Résumé du contenu de la page N° 15
TRAFFIC INFORMATION if you retune the radio from a traf- Traffic information fic information station to a station Your device is equipped with an RDS- that does not broadcast traffic in- EON receiver. EON stands for En- formation. hanced Other Network. If you hear the warning beep, you can Whenever a traffic announcement (TA) either switch off traffic information pri- is broadcast, the system switches au- ority or tune into a station that broad- tomatically from a station that does not casts t
Résumé du contenu de la page N° 1
Radio CD
Bristol CD36 7 646 075 310
Vancouver CD36 7 646 067 310
Operating instructions
http://www.blaupunkt.com
01Bristol_VancCD36 d 1 07.02.2006, 15:40 Uhr
Résumé du contenu de la page N° 2
2 1 3 4 5 6 7 12 9 8 13 11 10 2 01Bristol_VancCD36 d 2 07.02.2006, 15:40 Uhr
Résumé du contenu de la page N° 3
CONTROLS 1 Button to switch the device on/ ; Keys 1 - 6 off and operate the volume < BND•TS button mute function. Short press: Select the FM 2 button for detaching the con- memory banks and the MW trol panel (release panel). and LW wavebands. Long press: Start the Travel- 3 button to eject a CD from the store function. device. = SRC button 4 Volume control Short press: Switch sources be- 5 CD compartment tween CD, CD changer (if con- 6 AUDIO button to adjust the nected) and AUX. bass, treble, b
Résumé du contenu de la page N° 16
CD MODE If there is already a CD inserted in the CD mode drive, You can use this device to play stand- ➮ press the SRC button = re- ard audio CDs, CD-Rs and CD-RWs peatedly until “CD” appears in the with a diameter of 12 or 8 cm. display. Risk of severe damage to the Playback begins from the point at CD drive! which it was last interrupted. Contoured CDs (shape CDs) are not suitable for playback in this unit. Selecting tracks We do not accept responsibility for ➮ Press one of the arrow buttons
Résumé du contenu de la page N° 17
CD MODE Cancelling MIX “RPT OFF” appears briefly in the dis- play and the RPT symbol disappears. ➮ Press the 5 MIX button ; again. Normal playback is then resumed. “MIX OFF” appears briefly in the dis- Pausing playback (PAUSE) play and the MIX symbol disappears. ➮ Press button 3 ;. Scanning tracks (SCAN) “PAUSE” appears in the display. You can scan (briefly play) all the tracks on the CD. Cancelling pause ➮ Press and hold down the MENU ➮ Press button 3 ; whilst pause button 7 for longer than t
Résumé du contenu de la page N° 18
CD MODE CD-CHANGER MODE Ejecting a CD CD-changer mode ➮ Press the button 3 next to the Note: CD compartment. Information on handling CDs, in- serting CDs and operating the CD The CD is ejected. changer can be found in the oper- ➮ Remove the CD. ating instructions supplied with Notes: your CD changer. If a CD is ejected, the drive will Switching to CD-changer mode automatically draw it back in again after approx. 10 seconds. ➮ Press the SRC button = re- peatedly until “CHANGER” ap- You ca
Résumé du contenu de la page N° 19
CD-CHANGER MODE Cancelling REPEAT Configuring the display To stop the current track or current CD There are five display options availa- from being repeated, ble for CD-changer mode: Track number and playing time ➮ briefly press the 4 RPT button ;. (“TRCK-TIME”) “RPT OFF” appears and RPT disap- Track number and clock time pears from the display. (“TRCK-CLK”) Random track play (MIX) CD number and track number To play the tracks on the current CD in (“CD-TRCK”) random order, CD number and
Résumé du contenu de la page N° 20
CD-CHANGER MODE CLOCK TIME Cancelling SCAN CLOCK time To stop scanning, Displaying the clock time ➮ briefly press the MENU button 7. To display the clock time briefly, The currently scanned track will then ➮ press and hold down the SRC continue to be played normally. button = until the clock time ap- Note: pears in the display. You can set the scanning time. Setting the clock time For further details, please read the section entitled “Setting the scan- To set the clock time, ning time” in the
Résumé du contenu de la page N° 4
CONTENTS Pausing playback (PAUSE) .......... 40 Notes and accessories ......... 28 Configuring the display ................ 40 Removable control panel...... 29 Traffic announcements in CD Switching on/off ................... 30 mode ........................................... 40 Ejecting a CD .............................. 41 Adjusting the volume ............ 31 Setting the power-on volume ........ 31 CD-changer mode ................ 41 Quick volume reduction (mute) .... 32 Switching to CD-chang
Résumé du contenu de la page N° 5
NOTES AND ACCESSORIES Notes and accessories Road safety Road safety has absolute pri- Thank you for choosing a Blaupunkt ority. Only operate your car sound product. We hope you enjoy using this system if the road and traffic condi- new piece of equipment. tions allow you to do so. Familiar- Please read these operating instruc- ise yourself with the device before tions before using the equipment for setting off on your journey. the first time. You must always be able to hear The Blaupunkt editor
Résumé du contenu de la page N° 6
ACCESSORIES CONTROL PANEL Amplifiers Removable control panel You can use all Blaupunkt and Veloci- Theft protection ty amplifiers. As a way of protecting your car radio CD changers against theft, the unit is equipped with You can connect the following Blau- a removable control panel (release pa- punkt CD changers: CDC A 08, IDC nel). Without this control panel, the car A 09 and CDC A 03. radio is worthless to a thief. Protect you car radio against theft by taking the control panel with you every
Résumé du contenu de la page N° 7
CONTROL PANEL SWITCHING ON/OFF ➮ First, pull the control panel straight Switching on/off off the unit and then out towards You can switch the device on/off in the the left. following ways: The device switches off. Switching on/off using the vehicle All the current settings are saved. ignition Any CD already inserted in the unit re- If the device is correctly connected to mains there. the vehicle’s ignition and it was not switched off using button 1, it will Attaching the control panel switch on/
Résumé du contenu de la page N° 8
SWITCHING ON/OFF ADJUSTING THE VOLUME Note: Adjusting the volume If the vehicle ignition was switched You can adjust the volume in steps off before you inserted the CD, from 0 (off) to 66 (maximum). you will first have to switch on the To increase the volume, device by pressing button 1 in order to start playing the CD. ➮ press the button 4. To decrease the volume, Switching on/off using the removable control panel ➮ press the button 4. ➮ Remove the control panel. Setting the power-on volume
Résumé du contenu de la page N° 9
ADJUSTING THE VOLUME Note: Switching the confirmation To protect your hearing, the pow- beep on/off er-on volume is limited to a value The system will play a confirmation of “38”. If the volume level was beep for some functions if you keep a higher than this when the device button pressed down for longer than was last switched off and the two seconds, for instance, when you “LAST VOL” setting is activated, assign a radio station to a station but- the system will reset the volume to ton. You ca
