Instruction d'utilisation Pioneer SC-9540

Résumé du contenu de la page N° 1

HOME MEDIA GALLERY Firmware Update Instructions
For Models SC-25, SC-27 and SC-9540

Important
Do not turn off the Receiver, the PC being used for the update, or any network devices needed to
access the Internet or your network (such as a router) during the update process. Doing so may
damage the Receiver.
Only Microsoft Windows and Internet Explorer have been tested with this procedure. Other OS
and browsers may not properly update the Receiver.
Please end all applications on the P

Résumé du contenu de la page N° 2

Connect the LAN terminal on the Receiver to the LAN terminal on your router (with or without the built-in DHCP server function) with a straight LAN cable CAT5 or higher. Checking the Firmware Use the Receiver’s remote control for the following three steps: A. Press HOME MEDIA GALLERY button to select ‘Home Media Gallery’ as the input function. B. Select ‘Setup’ and press ENTER to confirm your selection. The Setup screen appears. C. Select ‘Information’ and press ENTER to confirm your

Résumé du contenu de la page N° 3

The Setup screen appears. 4. Select ‘Information’ and press ENTER button to confirm your selection. The Firmware Version for the Home Media Gallery is displayed. 5. Check the network settings. Press the ↑/ ↓ buttons to switch the display. Each time you press ↑/ ↓, the display switches as follows. 6. Please write down the current firmware version of the Receiver AS WELL AS and the IP address of the Receiver. 7. Press the top menu button to return to the top menu. 8. Open

Résumé du contenu de la page N° 4

Résumé du contenu de la page N° 5

The following image should now be displayed on the PC screen: 12. Click on the Browse button and open the folder that contains the firmware file you downloaded in step 1 and then select the unzipped firmware file (Do not use the .zip file). 13. Click on the ‘Upload’ button. The confirmation screen prior to updating appears, and the name of the new firmware file and other information are displayed. 14. Click on the ‘OK’ button. The firmware updating progress should be di