Instruction d'utilisation JVC KD-S24

Résumé du contenu de la page N° 1

Thank you for purchasing a JVC product.
KD-S24/KD-S14
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
CD RECEIVER: INSTRUCTIONS
Installation/connection are explained at the last section of this manual (reverse page, indicated with
symbol).
For customer Use:
Enter below the Model No. and Serial No. which
are located on the top or bottom of the cabinet.
Retain this information for future

Résumé du contenu de la page N° 2

OPERATIONS Basic operations Control panel Remote controller—RM-RK50 Check the current clock time/other information. Remote sensor 7 Installing battery See also “CLK DISP“ of “General settings—PSM.” DO NOT expose to strong light. Warning: To prevent accidents and damage • Do not install any battery other than CR2025 or its Lithium coin battery (CR2025) • Turn on the power. equivalent. • Turn off the power [Hold]. • Store out of reach of children. • Attenuate the sound (if the • Do not recharge,

Résumé du contenu de la page N° 3

General settings—PSM TROUBLESHOOTING Enter PSM menu. Select an item. Adjust. Finish Symptoms Remedies/Causes • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. Indication Item ( : Initial) Setting • The buttons on the unit do not work as you If you press M MODE, some buttons work differently from it intended. original function. Wait for 5 seconds or press M MODE again. DEMO • DEMO ON : Display demonstration will be act

Résumé du contenu de la page N° 4

Parts list for installation and connection A B C D Control panel Power cord Sleeve Trim plate E I F G H J K Washer (ø5) Handles Lock nut (M5) Mounting bolt— Rubber cushion Remote controller Battery M5 x 20 mm (M5 x 13/16") INSTALLATION If you are not sure how to install this unit correctly, consult your JVC car audio dealer. In dash-mounting Removing the unit Before removing the unit, release the rear section. When you stand the unit, be careful not to damage the fuse on the rear. Do the requi