Instruction d'utilisation Fusion ElectronicsMS-CD80

Résumé du contenu de la page N° 1

User / Installation Manual
Marine CD/MP3 Receiver
MS-CD80
Specifications and design are subject to change without notice.

Résumé du contenu de la page N° 2

Installation Contents Headunit Installation Installation 1 Button Description 4 General Operation 5 Menu Selection Function 6 Before installing the unit, please remove the two transit screws. Radio Operation 6 Note: When installing this unit on a vessel, use the two pieces of plastic film (supplied with the unit) to seal the two holes after removing the screws. CD Operation 7 Mounting Hole Dimensions 180mmW x 178mmD x 50mmH MP3/WMA Operation 8 CAUTION: FOR PROPER OPERATION

Résumé du contenu de la page N° 3

Removing The Unit Wiring Connections 1. Press the open button on the face plate 2. Insert the supplied keys into the grooves in the housing until they click (as shown) 3. Pull the levers towards you and slowly remove the unit from the cage. Detaching Front Panel 1. To detach the front panel press the open button 2. Then press the release button on the front underside edge and slide the face toward you. 3. A protective case is supplied to store your removeable front panel in. Reattachi

Résumé du contenu de la page N° 4

Button Description General Operation 16 17 18 15 10 11 12 13 14 POWER ON/OFF Press the power ON/OFF button (16) FRONT PANEL RELEASE Press OPEN button (8) to open the front panel SOUND ADJUSTMENT Press the SEL/MENU button (17) repeatedly to cycle the audio mode through bass, treble, balance and fader modes. Press the VOLUME UP button or VOLUME DOWN button to adjust the selected mode. Bass Treble Balance Fader 19 20 21 22 23 1 2 3 4 5 6 7 8 9 SETTING THE CLOCK EQUALIZATION 25 26 24 Press t

Résumé du contenu de la page N° 5

Menu Selection Function If there is no CD loaded press OPEN Button (8) and gently insert the disc until you feel some resistance. The CD will be drawn Press and hold SEL button (17) to enter Menu Select Mode. Press the VOLUME UP button (18) or the VOLUME DOWN button into the unit and playback will begin. (20) to adjust the BEEP function. If there is a CD already in the unit press the MODE button (11) until CD mode is displayed. BEEP 2nd MODE EJECTING A DISC Only beeps on press and hold

Résumé du contenu de la page N° 6

® MP3/WMA Operation iPod Operation Press the iPod Menu button (23) three times to enter the TRACK SELECTION There are three options to connect an iPod to the unit: search mode. Press the (19) and (21) buttons to Press the button (19) to skip to the previous track or Option 1: Via the MS–IP15L accessory cable (available separately). select the directory or file name displayed then press BND/ button (21) to skip to the next track. Option 2: Via the MS–IPDOCK Marine

Résumé du contenu de la page N° 7

HANDLING COMPACT DISCS (CD/CD-R/CD-RW) USB Operation - Avoid touching the surface - Avoid exposing the disc to direct sunlight Connect the USB device via the USB interface (22) and playback of MP3/WMA files will start automatically. USB mode can be - Ensure the disc is clean selected with the MODE button (11). Operation of the USB is identical to MP3 operation. (see page 8 - Ensure the disc is not scratched or damaged. CAUTION: To safely eject the USB device ensure you change the mode to

Résumé du contenu de la page N° 8

Technical Specifications Notes ........................................................................................................................................................................................................................... Operating Voltage DC 12volts, Negative Ground Chassis Dimensions 180(W) x 178(D) x 50(H) ..............................................................................................................................................................