Résumé du contenu de la page N° 1
ROOM AIR CONDITIONER
Use & Care Guide
ACONDICIONADOR DE AIRE PARA HABITACIÓN
Manual de Uso y Cuidado
CLIMATISEUR DE PIÈCE
Guide d’utilisation et d’entretien
Model: ESA405K
For questions about features, operation/performance, parts,
accessories or service call: 1-877-337-3639
Si tiene preguntas respecto a las características, funcionamiento,
rendimiento, partes, accesorios o servicio técnico,
llame al: 1-877-337-3639
Au Canada, pour assistance, installation ou service,
composez le : 1-877-337
Résumé du contenu de la page N° 2
TABLE OF CONTENTS AIR CONDITIONER SAFETY ........................................................3 Using the Remote Control...........................................................11 INSTALLATION REQUIREMENTS.................................................3 Changing Air Direction ................................................................12 Tools and Parts ............................................................................3 Normal Sounds.................................
Résumé du contenu de la page N° 3
AIR CONDITIONER SAFETY Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: You can be killed or seriously injured if you don't immediat
Résumé du contenu de la page N° 4
Electrical Requirements Location Requirements IMPORTANT: Observe all governing codes and ordinances. Check the location where the air conditioner will be installed. Make sure you have everything necessary for correct installation. The location should provide: Grounded electrical outlet within 6 ft (183 cm) of where the power cord exits the air conditioner. NOTE: Do not use an extension cord. Free movement of air in room to be cooled. A large enough opening for the air conditioner. In
Résumé du contenu de la page N° 5
RESET TEST Power Supply Cord NOTE: Your air conditioner’s device may differ from the one shown. A B A. Test button B. Reset button This room air conditioner is equipped with a power supply cord required by UL. This power supply cord contains state-of-the-art To test your power supply cord: electronics that sense current leakage. If the cord is crushed, the electronics detect current leakage and power will be 1. Plug power supply cord into a grounded 3 prong outlet. disconnected in a fraction o
Résumé du contenu de la page N° 6
NOTE: Your model may differ from the one shown. 3. Slide the side curtain frame into the top channel on the top of the air conditioner and the track on the bottom of the air conditioner. B 4. Slide the side curtain frame as close to the air conditioner as necessary to lock the side curtain to the frame. A. 13⁄32” screws 5. Repeat above steps for the left-hand side curtain and B. Top channel frame. Install Side Curtains NOTE: Attach curtains to the air conditioner before placing the
Résumé du contenu de la page N° 7
Position Air Conditioner 3. Slide the side bracket over the screw. 4. Tighten the screw. The side bracket should be resting on the windowsill. NOTES: Handle the air conditioner gently. Be sure your air conditioner does not fall out of the opening during installation or removal. The place where the power cord exits the air conditioner should be no more than 6 ft (183 cm) from a grounded outlet. Do not block the louvers in the front panel. 5. Use 1⁄8” drill bit to drill a starter hol
Résumé du contenu de la page N° 8
Top View 4. Plug into a grounded 3 prong outlet. 5. Press RESET on the power supply cord. See “Electrical Requirements.” Bottom View Complete Installation Notes:Push to open the air outlet before using the air conditioner. 1. Insert the foam seal behind the top of the lower window sash and against the glass of the upper window. A B Adjust to desired position. A. Top of lower window sash B. Foam seal 2. Place the window lock bracket as shown. Use a 1⁄8” drill bit to drill a starter hole thro
Résumé du contenu de la page N° 9
AIR CONDITIONER USE Do not try to operate your air conditioner in the Cool mode when Operating your air conditioner properly helps you to obtain the best possible results. outside temperature is below 61°F (16°C). The inside evaporator coil will freeze up, and the air conditioner will not operate This section explains proper air conditioner operation. properly. IMPORTANT: If you turn off the air conditioner, wait at least 3 minutes before turning it back on. This keeps the air conditioner
Résumé du contenu de la page N° 10
To set the Timer to turn on the air conditioner and Temperature change the previous settings: 1. Turn on the air conditioner. Press the TEMP/TIME up arrow button to raise the 2. Adjust the mode to Fan, Cool, Energy Saver or Dehum. temperature. Each time you press or hold the TEMP/TIME up 3. For Fan, Cool or Energy Saver mode, adjust the fan speed to arrow button, the temperature will go up 1ºF until it reaches High, Med or Low. 86°F (30°C). 4. Adjust the temperature between 61ºF and 8
Résumé du contenu de la page N° 11
Using the Remote Control NOTE: Dots are Braille text for sight Impaired. Temperature Remote control may differ in appearance. Press the TEMP/TIME up arrow button to raise the ON/OFF temperature. Each time you press or hold the TEMP/TIME up arrow button, the temperature will go up 1ºF until it reaches 86°F (30°C). MODE TEMP/TIME SPEED Press the TEMP/TIME down arrow button to lower the TIMER temperature. Each time you press or hold the TEMP/TIME down arrow button, the temperature will go
Résumé du contenu de la page N° 12
4. Adjust the temperature between 61ºF and 86ºF (16ºC and 30ºC). Changing Air Direction NOTE: In Fan mode, the temperature cannot be set. 4-Way Air Flow:The air directional louvers let you control the show remaining hours before the air conditioner will turn on. 6. Press the TEMP/TIME up or down arrow button to change the directed up-down,left-right. delay time from 1 hour to 24 hours. 7. Timer On indicator light will remain on. To clear Timer delay program: NOTE: Air condition
Résumé du contenu de la page N° 13
TROUBLESHOOTING Before calling for service, try the suggestions below to see whether you can solve your problem without outside help. Air conditioner power supply cord trips (Reset button pops out) Disturbances in your electrical current can trip (Reset button will pop out) the power supply cord. Press and release RESET (listen for click; Reset button will latch and on some devices, a green light will turn on) to resume operation. Electrical overloading, overheating, cord pinching or aging ca
Résumé du contenu de la page N° 14
ASSISTANCE OR SERVICE Before calling for assistance or service, please check “Troubleshooting.” It may save you the cost of a service call. If label. See “Electrical Requirements” for the location of the model you still need help, follow the instructions below. and serial number label. Please record the model and serial number information below. When calling, please know the purchase date and the complete Also, record the purchase date of your appliance and the store’s model and serial number
Résumé du contenu de la page N° 15
LIMITED WARRANTY ONE YEAR LIMITED WARRANTY This warranty covers all defects in workmanship or material for the mechanical and electrical parts (including labor costs) contained in this product for a period of 12 months from the date of purchase. For commercial or rental application, the warranty is 90 days. You must keep and be able to provide your original sales receipt as proof of the date of purchase. FIVE YEAR LIMITED WARRANTY ON THE SEALED SYSTEM The sealed system and compressor (hermetic
Résumé du contenu de la page N° 16
Résumé du contenu de la page N° 17
SEGURIDAD DEL ACONDICIONADOR DE AIRE Su seguridad y la seguridad de los demás es muy importante. Hemos incluido muchos mensajes importantes de seguridad en este manual y en su electrodoméstico. Lea y obedezca siempre todos los mensajes de seguridad. Este es el símbolo de advertencia de seguridad. Este símbolo le llama la atención sobre peligros potenciales que pueden ocasionar la muerte o una lesión a usted y a los demás. Todos los mensajes de seguridad irán a continuación del símbolo de adver
Résumé du contenu de la page N° 18
Requisitos de ubicación Requisitos eléctricos IMPORTANTE:Observe todos los códigos y reglamentos aplicables. ADVERTENCIA Asegúrese de tener todo lo necesario para una instalación correcta. El lugar debe tener: de donde el cable eléctrico sale del acondicionador de aire. NOTA: No use un cable eléctrico de extensión. Libertad de movimiento del aire en la habitación que desea Peligro de Choque Eléctrico enfriar. Conecte a un contacto de pared de
Résumé du contenu de la page N° 19
RESET TEST Para poner a prueba el cable de suministro de energía: Cable de suministro de energía 1. Enchufe el cable de suministro de energía en un tomacorriente de 3 terminales con conexión a tierra. NOTA:El dispositivo de su acondicionador de aire puede ser 2. Presione RESET (Reposición) (en algunos aparatos se diferente del que se ilustra. A B 3. Presione TEST (Prueba) (escuche el chasquido, el botón de luz verde). 4. Presione y suelte RESET (escuche el chasquido, el
Résumé du contenu de la page N° 20
Prepare el acondicionador de aire para la instalación 3. Deslice el marco de la cortina lateral dentro del canal Instale el canal superior superior, en la parte superior del acondicionador de aire, y la vía en la parte inferior del mismo. 1. Coloque el canal superior sobre la parte superior del acondicionador de aire. 2. Sujete el panel superior al acondicionador de aire usando tres tornillos de 13⁄32”. NOTA:Su modelo podría variar del modelo que se muestra. B acondicionador
