Résumé du contenu de la page N° 1
(msr
DIGITAL AUDIO
CT-FX729M w
CT”FX719 w
STEREO CAR CASSETTE RECEIVER
RADIO-CASSEITE ESTEREOFONICO PARA AUTOMOVIL
OWNER’S RECORD
For your convenience, record the model number and
serial number (you will find them on the right side of
your set) in the space provided below. Please refer to
them when you contact your AIWA dealer in case of
difficulty,
Model No. \CT-FX729M, CT-FX719
‘e”a’ ‘0 ~
Résumé du contenu de la page N° 2
NOTE Welcome This equipment has been tested and found to Thank you for your purchasing this AIWA product. comply with the limits fora Class B digital device, To optimize the performance of this unit, please pursuant to Part 15 of the FCC Rules. These read through this manual carefully. limits are designed to provide reasonable protection against harmful interference In a In addition to this operating instructions manual, residential installabon. be sure to refer to the separate installation and
Résumé du contenu de la page N° 3
TABLE OF CONTENTS FRONT PANEL ................................................................................................................................... 3 DETACHING AND ATTACHING THE FRONT PANEL ... ....... .... ....... .... ... ... .... .... .. ... ..... .. 4 SETTING THE CLOCK ....................................................................................................................... 5 RADIO OPERATION ..........................................................................
Résumé du contenu de la page N° 4
FRONTPANEL 123 v?? Displaywindow 30 o @ REP1 (repeat 1) button* (CT-FX729M ~ +/- (audio control) button @ SEL (select) button only) @ H-BASS button @ RANDOM button* (CT-FX729M only) @ DIR (direction) button @ DISP (display) button @LO (local/DX) button @CD (CD changer playlpause) button* (CT-FX729M only) @MY INFO (my information) button @ BAND button @ DRV (drivers sound stage adjustment) @ OPEN button button @I Level indicator @ A.ME (auto memory/preset scan) button @Tape/CD’ running indicator
Résumé du contenu de la page N° 5
Attachingthefrontpanel DETACHING AND I Fit the lower side of the front panel to its hinge pegs as illustrated @) -@. ATTACHING THE FRONT PANEL / 1 2 You can detach the front panel from the unit and 2 Close the front panel. carry it with you when you leave your car unattended. When you carry the front panel out of your car, use the supplied carrying case, --- I Press and hold MUTE for more than 2 !., seconds to turn the unit off. z Press OPEN to open the front panel and pull it out as illustrated
Résumé du contenu de la page N° 6
RADIO OPERATION SETTING THE CLOCK 4 1,2 1,3 DISP 2 You can turn the unit on by pressing any button 3 except OPEN on the front panel. Press BAND to turn the radio on. 1 I With the unit on, press and hold SELfor The radio frequency appears. more than 2 seconds until the clock 2 Press BAND again to select the band indication appears. from among FI (FM1), F2 (FM2), F3 (FM3), Al (AM1) and A2 (AM2). The band indications appear cyclically in order. ● F1, F2 and F3 share the same frequency range. ● Al a
Résumé du contenu de la page N° 7
TUNET/A CD BAND PRESETTING STATIONS MUTE DIR LO 21 Toturn the unit off Press and hold MUTE for more than 2 seconds. Note The unit turns on in the last mode selected when you turned off the unit with the exceptions of pressing the following buttons. ● Pressing DIR turns on the unit in Tape Play 1 Press BAND to select a desired band mode. from among F1 (FM1 ), F2 (FM2), F3 ● Pressing CD turns on the unit in CD Changer (FM3), Al (AM1) and A2 (AM2). Play mode. ● Pressing BAND turns on the unit in Ra
Résumé du contenu de la page N° 8
PRESETTING STATIOiIIS 1 You can manually preset stations that have not been selected by auto memory. 21 2 ~ Press BAND to select a desired band from among F1 (FM1), F2 (FM2), F3 (FM3), Al (AMI) and A2 (AM2). z Press the desired preset station button. 3 The number of the pressed preset station button appears next to the frequency 1 Prese BAND to select the band from indication. among F1 (FM1), F2 (FM2), F3 (FM3), Al (AM1) and A2 (AM2). Active tuning reception control (ATRC) 2 Tune in the station
Résumé du contenu de la page N° 9
4 Set the time you wish the unit to turn on in Radio mode. MY INFORMATION to set the hour. PressTUNE Y SWITCH Press TUNE A to set the minute, 5 Press SEL. The “BAND SEL” indication flashes. You can timer-activate the radio for up to two Press SEL again. daily radio programs. The unit turns on and off in Radio indication flashes. Radio mode at the preset time automatically, 3,5,7,9 4,8,106 Band indication 6 Press BAND to select the band. 7 Press SEL. The “FREQ indication flashes. Press SEL again.
Résumé du contenu de la page N° 10
To cancelthe timer MY INFORMATION SWITCti To cancel program 1, press TUNE 7 or TUNE A repeatedly until the “PRG1 OFF indication flashes in step 2. 11 To cancel program 2, press TUNE Y or TUNE A repeatedly until the “PRG2 OFF” indication flashes in step 4. Noles ● When you preset two programs, be sure that they do not overlap. ● Even if the unit is in a mode other than Radio mode, the unit switches to Radio mode and 12 tunes in the preset radio program at the preset ~~ Press SEL. time automatical
Résumé du contenu de la page N° 11
Press the following buttons to operate tape transporl. TAPE PLAYBACK To do this Press this button Eject the cassette 3 1 DIR 1 Change the playback side Stop fast-forwarding or rewinding and resume playback Fast-forward either side 1 Press OPEN to open the front panel of the tape and insert a cassette. Playback starts in the direction that the unit Rewind either side of played back previously. the tape Stop the tape and turn @ the unit off (for more than 2 seconds) ● At the end of the tape in Fas
Résumé du contenu de la page N° 12
TAPE PLAYBACK SOUNDADJUSTMENTS Switching modes 22 When the unit is in Radio or CD Changer Play mode, inserting a cassette switches the unit to Tape Play mode automatically. To preventtapeproblems Before inserting a cassette into the unit, make sure that there is no slack in the tape. If necessary, take up the slack by inserting a pencil into the MUTE spindle hole and winding. Tapes of 90 minutes or longer are extremely thin Press SEL to select the mode that you 1 and easily deformed or damaged.
Résumé du contenu de la page N° 13
You can enjoy music with strong bass sound. You can adjust the position of sound stage and H-BASS tone balance to best serve a particular seat just by pressing DRV. DRV Press H-BASS to obtain powerful bass. Each time you press H-BASS, the bass sound level changes as follows. Press DRV to change the position of sound stage. OFF Each time you press DRV, the sound stage L changes as follows. H-BASS 1 LOW J H-BASS 2 Medium J. H-BASS 3 High FL For the front left seat [ = R For the front right seat Wh
Résumé du contenu de la page N° 14
Toswitchmodes ● To turn the unit off, press and hold MUTE for CD CHANGER PLAY more than 2 seconds. (CT-FX729M only) ● Even if the unit is in Radio or Tape Play mode, pressing CD switches the unit to CD Changer Play mode. You can play discs with this unit by connecting ● Ifyou wish to switch to another mode, press the the optional AIWA ADC-EX1 06, ADC-M60 CD following buttons. changer. Make sure that the disc magazine – Pressing DIR switches the unit to Tape Play loaded with the discs is inserted
Résumé du contenu de la page N° 15
Randomplay (ADC-EX106, ADC-M60only) Press RANDOM (the “RANDOM” indication CONNECTING A appears). All the tracks on the current disc are played in PORTABLE CD/MD random order. PLAYER OR OTHER To cancel Random play, press RANDOM again. EQUIPMENT This unit is equipped with a line-level input (CD/ MD IN) jack, enabling high sound quality. m I 1 1 Connect a portable CD/MD player, etc. via the CD/MD IN jack (3.5-mm dia.) on the unit. 2 Start playback from the connected equipment. The “CD IN” indicatio
Résumé du contenu de la page N° 16
SETTING THE BEEP TONE SETTING THE CONTRAST CONTROL The unit is preset at the factory to beep each time you press any button on the front panel except You can change the contrast of the display. OPEN. You can stop beeping by following the procedure below. 1 1,3 2 2 1 With the unit on, press and hold DRV 1 With the unit off, press and hold SELfor for more than 2 seconds. more than 2 seconds. The current contrast indication appears. 2 Press TUNE T or TUNE A repeatedly to A repeatedly to z Press TUN
Résumé du contenu de la page N° 17
TROUBLESHOOTING MAINTENANCE (CT-FX729M only) Cleaning the front panel When the front panel is soiled, wipe the surface Errorcodes of the panel with a soft, dry cloth, In the following cases the corresponding error Cleaning the tape head code indication appears. Follow the suggestions below to solve the problem, If the error code Use a cleaning cassette to clean the playback head and capstans approximately once a month, indication does not disappear, consult an AIWA If the playback head is dirty,
Résumé du contenu de la page N° 18
GENERAL Power-Supply Voltage: SPECIFICATIONS 14.4 V (11 to 16 V allowable), DC, negative ground Load Impedance, 4 Q Tone Control: Bass ~10 dB at lr)r) HZ RADIO SECTION Treble *IO dB at 10 kHz Preemp Output Voltage (load Impedance): (FM) CT-FX729M: 40 V (10 kQ) Frequency Range: 87.5 MHz – 108 MHz CT-FX719: 2.2 v (lo m) (100-kHzsteps) Installation size: 182 (W) x 53 (H) x 155 (D) mm 87.5 MHz – 108 MHz (7 l/. (W)X21/8 (H)X61/8 (D) ~;k~t-feteps) inches) Usable Sensitwlty Accessory supphed: Carrying
Résumé du contenu de la page N° 19
Résumé du contenu de la page N° 20
PRECAUTION Bienvenidos Las modificaciones y ajustes de este producto Muchas gracias por su compra de este producto que no han sido autorizadas a titulo expreso por AlWA. Para utilizar este aparato en Ias mejores el fabricate pueden anularel derecho o autoridad condiciones posibles, lea cuidadosamente Ias del usuario para hater funcionar este producto. instrucciones de este manual. Adem& de este manual de instrucciones, lea tambien Ios manuales de instalacion y de conexiones que vienen por separa
