Résumé du contenu de la page N° 1
Register your product and get support at
www.philips.com/welcome
CE152
User manual
Résumé du contenu de la page N° 2
Contents 9 Listen to an external player 22 1 Safety 2 10 Adjust sound 23 2 Your car audio system 3 Introduction 3 What's in the box 3 11 Additional information 24 Overview of the system 4 Reset the system 24 Replace the fuse 24 3 Install the car audio system 7 Connect wires 7 12 Product information 25 Mount into the dashboard 8 Attach the front panel 9 13 Troubleshooting 26 General 26 4 Get started 11 About the Bluetooth device 26 For the first time use 11 Set the time format 11 14 Notice 28 Set
Résumé du contenu de la page N° 3
1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. • Modification of the product could result in hazardous radiation of EMC or other unsafe operation. • The device is designed for negative ground (earth) 12 V DC operation only. • To ensure safe driving, adjust the volume to a safe and comfortable level. • Improper fuses can cause damage or fire. When you need to change the fuse, con
Résumé du contenu de la page N° 4
Bitrates: 64-192 kbps and variable 2 Your car audio bitrates • ID3 tag V2.0 or later system • Unsupported files: AAC, WAV, and PCM files DRM protected WMA files (.wav, .m4a, Congratulations on your purchase, and .m4p, .mp4, and .aac) welcome to Philips! To fully benefit from the WMA files in lossless format support that Philips offers, register your product at www.philips.com/welcome. What's in the box Introduction Check and identify the contents of the package: With this system, you can:
Résumé du contenu de la page N° 5
Overview of the system ab cd e tsrq po nm lk jihf g uv • During a call, press and hold to transfer a the phone call to mobile phone. • Unlock the front panel. d LCD screen b • For .wma and .mp3 tracks on a storage e device, press to select the previous • Connect to a USB storage device. folder. • Connect to a compatible iPod/iPhone. • Press and hold to access the system f MP3-LINK menu. • Connect to the audio output socket • Press to select a tuner band. (usually the headphone socket)
Résumé du contenu de la page N° 6
• In radio mode, press to select the • In radio mode, press and hold to store preset radio station of No. 6. the current radio station at channel • In radio mode, press and hold to store No. 1. the current radio station at channel • For .wma and .mp3 tracks on a storage No. 6. device, press to access the track list. • Press to access the music menu of an h iPod/iPhone. • In radio mode, press to select the preset radio station of No. 5. m /DSP • In radio mode, press and hold to store • Pre
Résumé du contenu de la page N° 7
s • Press to enable or disable the maximum volume. • Press and hold to enable or disable the DBB (dynamic bass boost) sound effect. t • Press to answer or redial a call. • Press to hang up a call. • Press and hold to reject an incoming call. u Slot for SD/SDHC card • Insert an SD/SDHC card. v RESET • Press to reboot the system. 6 EN
Résumé du contenu de la page N° 8
3 Install the car Connect wires audio system Note • Make sure that all loose leads are insulated with electrical tape. Caution • Consult a professional to connect wires as instructed below. • Use the controls only as stated in this user manual. 1 Check the car's wiring carefully and Always follow the instructions in this chapter in connect them to the the supplied ISO sequence. male connectors. These instructions are for a typical installation. However, if your car has different requireme
Résumé du contenu de la page N° 9
183 mm ISO male Connect to Mount into the dashboard connectors i Yellow strip To the +12V car • If the car does not have an on-board drive battery which is or navigation computer, disconnect the energized at all times negative terminal of the car battery. • If the car battery is not disconnected, to 2 Connect the antenna and amplifier as avoid short-circuit, make sure that the bare illustrated, if applicable. wires do not touch each other. 1 Make sure that the car dashboard opening is w
Résumé du contenu de la page N° 10
53.5 mm 183 mm 3 Install the sleeve into the dashboard and bend the tabs outward to fix the sleeve. 6 Reconnect the negative terminal of the car battery. 4 Slide the unit into the sleeve until you hear Attach the front panel a "click". 1 Insert the notch on the front panel to the chassis on the main unit. 2 Press the left end of the front panel inwards until it is securely locked with a "click". 5 Attach the trim plate. EN 9
Résumé du contenu de la page N° 11
Detach the front panel Note • Before you insert an SD/SDHC card or reset the system, detach the front panel. • Before you detach the front panel, make sure that the system is turned off. 1 Press to release the front panel. 2 Pull the front panel outwards to remove it. 10 EN
Résumé du contenu de la page N° 12
4 Get started Set the clock 1 Press and hold to access the system menu. 2 Press / repeatedly until [CLK] is For the first time use displayed with time digits blinking. 3 Rotate anti-clockwise to set the hour. 1 Press to turn on the system. 4 Rotate clockwise to set the minute. » [PHILIPS] is displayed and then [SELECT OPERATING REGION] (select a radio region) scrolls. Display the clock 2 When one of the following options is Press and hold /DISP until [CLK] and the set displayed, rot
Résumé du contenu de la page N° 13
Select a listening zone 1 Press and hold until one of the following options is displayed. • [ALL]: For all passengers • [FRONT-L]: For the front-left seat only • [FRONT-R]: For the front-right seat only • [FRONT]: For front passengers only 2 Press / repeatedly to select a listening zone. Mute the button beep The beep sound of buttons is enabled by default. 1 Press and hold to access the system menu. 2 Press / repeatedly until [BEEP ON] or [BEEP OFF] is displayed. • [BEEP ON]: Enable
Résumé du contenu de la page N° 14
5 Listen to radio Search for a radio station Search for a radio station automatically Select a tuner region Press or to search for the previous or next radio station with strong signals. You can select a radio region that matches your location. 1 In radio mode, press and hold to access Search for a radio station manually the system menu. 1 Press and hold or until [M] blinks. 2 Press / repeatedly until one of the 2 Press or repeatedly until the target following options is displayed
Résumé du contenu de la page N° 15
3 Press to access the list of program Store radio stations manually types. 1 Press or repeatedly to select a 4 Rotate to select a program type, and tuner band. then press to confirm. 2 Tune to the radio station that you want to Item Program Description store. type 3 Press and hold , , , , 1 NEWS News services , or to store the radio station at the 2 AFFAIRS Politics and current selected channel. affairs 3 INFO Special information programs Play with RDS 4 SPORT Sports 5 EDUCATE
Résumé du contenu de la page N° 16
Tip Use alternate frequencies If the signal of an RDS station is poor, enable • When a traffic announcement cuts in, you can press to switch the system to the previous mode. the AF (Alternate Frequency) function to search for another station that broadcasts the same program. 1 Press and hold to access the system Synchronize the system clock menu. You can synchronize the system clock with an 2 Press / repeatedly until [AF ON] or RDS station that transmits time signals. [AF OFF] is disp
Résumé du contenu de la page N° 17
2 Switch the source to [USB] or [SD/ 6 Play from a SDHC]. • When a USB storage device is storage device connected and recognized, the system switches the source to [USB] automatically. This system can play .mp3 and .wma files that 3 If the play does not start, press . are copied onto a compatible storage device. Note Control play • Philips does not guarantee compatibility with all storage devices. • NTFS (New Technology File System) file system is not Button Function supported. Press repe
Résumé du contenu de la page N° 18
Switch tracks During play, you can switch tracks or folders quickly. Switch tracks directly 1 Press to access the track list. » The file name of current track scrolls. 2 Rotate to toggle through tracks. 3 Press to play the selected track. Switch folders for a track 1 Press to access the folder list. » [ROOT] scrolls. 2 Rotate to toggle through folders. » The name of current folder scrolls. 3 Press to select the folder. 4 Rotate to toggle through tracks in the folder. 5 Press to play th
Résumé du contenu de la page N° 19
» The system starts playing tracks that 7 Play from an are stored on your iPod/iPhone. iPod/iPhone Note • Before you disconnect the iPod/iPhone, switch the system to another source. Note • During play, no audio signals are transferred through the headphone socket of your iPod/iPhone. Control play Button Function Compatible iPod/iPhone Press repeatedly to select a models control mode: control play on your iPod/iPhone, or on the This car audio system supports the following system. iPod a
Résumé du contenu de la page N° 20
Search for a track After accessing the iPod/iPhone menu, you can select a specific track quickly. 1 Press to access the iPod/iPhone menu. » [PLAYLIST] scrolls. 2 Rotate to select a category. 3 Press to access the list of tracks under the category. » The file name of the fir st track scrolls. 4 Rotate to select a track. » The file name of current track scrolls. 5 Press to start play. Charge your iPod/iPhone Once the iPod/iPhone is docked and recognized, the charging starts. EN 19
