Résumé du contenu de la page N° 1
USER MANUAL
EFA9620
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
electrolux 3 EN RECOMMENDATIONS AND SUGGE- STIONS 6 CHARACTERISTICS 7 USE 12 MAINTENANCE 14 IT
Résumé du contenu de la page N° 4
4 electrolux EN Welcome to the world of Electrolux Thank you for choosing a fi rst class product from Electrolux, which hopeful- ly will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality prod- ucts that make your life more comfort- able. You fi nd some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefi ts of your new machine. We promise that it will pr
Résumé du contenu de la page N° 5
electrolux 5
Résumé du contenu de la page N° 6
6 electrolux Recommendations and Suggestions RECOMMENDATIONS AND SUGGESTIONS Installation • Adjust the fl ame intensity to direct it onto the bottom of the pan only, mak- • The manufacturer will not be held li- ing sure that it does not engulf the able for any damages resulting from sides. EN incorrect or improper installation. • Deep fat fryers must be continuously • The minimum safety distance be- monitored during use: overheated oil tween the cooker top and the extrac- can burst into fl am
Résumé du contenu de la page N° 7
Characteristics electrolux 7 CHARACTERISTICS Dimensions EN
Résumé du contenu de la page N° 8
8 electrolux Characteristics Components Ref. Q.ty Product Components 1 1 Hood Body, complete with: Con- EN trols, Light, Blower, Filters 2 1 Telescopic Chimney comprising: 2.1 1 Upper Section 2.2 1 Lower Section 7.1 1 Telescopic frame complete with extractor, consisting of: 7.1a 1 Upper frame 7.1b 1 Lower frame 9 1 Reducer Flange ø 150-120 mm 10 1 Flange ø 150 15 1 Air Outlet Connection 24 1 Junction box 25 2 Pipe clamps Ref. Q.ty Installation
Résumé du contenu de la page N° 9
Installation electrolux 9 INSTALLATION Drilling the Ceiling/shelf • Use a plumb line to mark the centre of the hob on the ceiling/support shelf. EN • Place the drilling template 21 provided on the ceiling/support shelf, making sure that the template is in the correct position by lining up the axes of the template with those of the hob. • Mark the centres of the holes in the template. • Drill the holes at the points marked: • for concrete ceilings, drill for plugs appropriate to the screw
Résumé du contenu de la page N° 10
10 electrolux Installation Fixing the frame • Loosen the two screws fastening the lower chimney and remove this from the lower frame. EN • Loosen the two screws fastening the upper chimney and remove this from the upper frame. If you wish to adjust the height of the frame, proceed as follows: • Unfasten the eight metric screws join- ing the two columns, located at the sides of the frame. • Adjust the frame to the height re- quired, then replace all the screws removed as above. • Inser
Résumé du contenu de la page N° 11
Installation electrolux 11 Connection in Ducting Version When installing the ducting version, connect the hood to the chimney using either a fl exible or rigid pipe ø 150 or EN 120 mm, the choice of which is left to the installer. • To install a ø 120 mm air exhaust con- nection, insert the reducer fl ange 9 on the hood body outlet. • Fix the pipe using the pipe clamps 25 provided. • Remove charcoal fi lters, if present. Connection in Recycling Version • Fix the connectio
Résumé du contenu de la page N° 12
12 electrolux Installation / Use Electrical Connection • Connect the hood to the mains through a two-pole switch having a EN contact gap of at least 3 mm. • Remove the grease fi lters (see para- graph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan. • Connect the control connector Cmd. • Connect the lights connector Lux. • Place the connectors in the junction box 24 and close it using the 2 screws
Résumé du contenu de la page N° 13
Use electrolux 13 Touch Basic functions Indicator lights control Dual Function When briefl y pressed it switches the lighting Touch control Lights off L system on and off. unlit When pressed for 2 seconds it starts the Touch control lit Lights on lighting system in “courtesy light” mode. EN The lamps are fed at a reduced power of approximately 5W. Such function can be Touch control Courtesy light on stopped by pressing the touch control for 2 unlit seconds or just by pressing it shortly in o
Résumé du contenu de la page N° 14
14 electrolux Maintenance MAINTENANCE Cleaning the Comfort Panels Cleaning of the Metal Cassette Filters • Pull the Comfort Panel to open it. • Disconnect the panel from the hood Alarm reset EN canopy by sliding the fi xing pin lever. • Stop the motor. • The comfort panel must never be • Press the F -touch control for at least washed in a dishwasher. 4 seconds until the T1 -touch control • Clean the outside using a damp cloth fl ashes. and neutral liquid detergent. Cleaning the fi lters • C
Résumé du contenu de la page N° 15
Maintenance electrolux 15 Reset the alarm signal Replacing the Charcoal Filter • Stop the motor. This fi lter cannot be washed or regene- • Press the touch control F for at least rated, and must be replaced when the F 4 seconds, until the touch control T1 touch control starts to fl ash, or at least EN fl ashes. once every 4 months. The alarm is only triggered when the motor is on. Replace the Filter Enabling/Disabling the alarm signal • Pull the Comfort Panel to open it. • In Recirculation Vers
Résumé du contenu de la page N° 16
16 electrolux
Résumé du contenu de la page N° 17
Résumé du contenu de la page N° 18
www.electrolux.com 436003562_03 - 070130
