Résumé du contenu de la page N° 1
DVD PLAYER &
VIDEO CASSETTE RECORDER
HR-XVC16BU
HR-XVC17SU
INSTRUCTIONS
LPT1126-001A
Résumé du contenu de la page N° 2
REGULATORY INFORMATION: FCC Part 15 CAUTION This equipment has been tested and found to comply with RISK OF ELECTRIC SHOCK the limits for a Class B digital device, pursuant to Part 15 DO NOT OPEN of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when CAUTION: TO REDUCE THE RISK the product is operated in a residential installation. This OF ELECTRIC SHOCK product generates, uses, and can radiate radio frequency DO NOT REMOVE COVER (OR BACK)
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installa- tion, use, and servicing. This product does not contain any
Résumé du contenu de la page N° 4
MTS (Multi-Channel TV Sound) . . . . . . . . . .21 Contents VCR Tape Recording . . . . . . . . . . . . . . . .22-25 Basic Instructions . . . . . . . . . . . . . . . . . . . . .22 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Timer Recording . . . . . . . . . . . . . . . . . . .22-23 Moisture Condensation . . . . . . . . . . . . . . . . . .5 Instant Timer Recording . . . . . . . . . . . . . . .24 Symbols Used in this Manual . . . . . . . . . . . .5 Recording from Externa
Résumé du contenu de la page N° 5
Introduction To ensure proper use of this product, please read this About the Symbol Display owner’s manual carefully and retain for future reference. “ ” may appear on your TV display during operation and indicates that the function is not permitted by this unit or the disc or not available at This manual provides information on the operation that time. and maintenance of your DVD+VCR. Should the unit require service, contact an Authorized Service Notes on Discs Center. Handling Discs Moistu
Résumé du contenu de la page N° 6
Types of Playable Discs Disc-related terms DVD JPEG (8 cm / 12 cm disc) Joint Pictures Expert Group. JPEG is a compressed file format that allows you to save images with no Video CD (VCD) limit on the number of colors. (8 cm / 12 cm disc) Audio CD Title (DVD only) (8 cm / 12 cm disc) A title is generally a distinct section of a DVD disc. For example the main feature could be title 1, a docu- mentary describing how the film was made could be In addition, this unit plays DVD-R, DVD+R, DVD-RW, t
Résumé du contenu de la page N° 7
Regional code About the Remote Control This DVD+VCR is designed and Operation Range manufactured for playback of 1 ALL region “1” encoded DVD software. Point the Remote Control at the remote sensor and This unit can play only DVD discs press the buttons. labeled “1” or “ALL”. Distance: About 23 ft (7 m) from the front of the remote sensor. Angle: About 30° in each direction of the front of the Notes on Regional Codes remote sensor. • Most DVD discs have a globe with one or more Battery installa
Résumé du contenu de la page N° 8
Front Panel a Disc Tray (DVD deck) Indicates when the Progressive scan is [P] Insert a disc here. active. b Cassette Compartment (VCR deck) Indicates repeat mode. Insert a video cassette here. DVD+VCR is in timer recording or a timer c POWER 1/: recording is programmed (VCR part only). Switches the DVD+VCR ON and OFF. A cassette is in the VCR deck. d REW (m m) - DVD: Skip to beginning of current chapter or track, The VCR deck is selected. VCR press twice in quick successions to go to previou
Résumé du contenu de la page N° 9
Remote Control DISPLAY Accesses On-Screen Display. Switches between the clock, tape counter and tape remaining modes on the display. DVD Select the DVD+VCR function mode to DVD. EJECT (Z) Ejects the tape in the VCR deck. ENTER/OK Confirms menu selections. Displays functions on the TV screen. MARKER Marks any point during playback. OPEN/CLOSE (Z) Opens and closes the disc tray. PAUSE (X) Pause playback or recording. Press repeatedly for frame-by-frame playback. N N PLAY ( ) Starts pla
Résumé du contenu de la page N° 10
Rear Panel abcde f gh a ANT.IN e AUDIO OUT (Left/Right) (DVD OUT) Connect the VHF/UHF/CATV antenna to this terminal. Connect to a TV or other equipment with audio inputs. b VCR IN LINE 1 (VIDEO/AUDIO (Left/Right)) f AC Power Cord Connect the audio/video output of an external source Plug into the power source. (Audio system, TV/Monitor, VCR, Camcorder). g RF. OUT c DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with RF coaxial inputs. Connect to a TV with video and audio inputs. h COAXI
Résumé du contenu de la page N° 11
To view or record a CATV channel when Connecting an Antenna Connecting an Antenna using cable box or Cable TV or Cable TV 1 Tune the TV to the DVD+VCR output channel (CH 3 or 4). aa Antenna: 2 Set the DVD+VCR channel selector to the cable Disconnect the antenna from the rear of the TV and output channel. (Example: CH3) identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked 3 Select a channel using the cable converter. ANT.IN on your DVD+VCR. If
Résumé du contenu de la page N° 12
RF coaxial connection Optional Optional TV Connections TV Connections Connect the RF.OUT jack on the DVD+VCR to the These connections support only DVD playback. antenna in jack on the TV using the supplied 75-ohm The tuner and VCR still output through the RF.OUT Coaxial Cable (R). (R) or DVD/VCR OUT (A, V) jacks. How to set the DVD+VCR’s RF output Component Video / Progressive Scan connection channel If your television is a high-definition or “digital ready” 1. When the DVD+VCR is turned off
Résumé du contenu de la page N° 13
Connecting to an amplifier equipped with two Connecting External Audio/Video (A/V) channel digital stereo (PCM) or to an Audio/Video source to DVD+VCR receiver equipped with a multi-channel decoder Connect the VCR IN LINE 1 or LINE 2 jacks on the (Dolby Digital™, MPEG 2, or DTS) DVD+VCR to the audio/video out jacks on your 1. Connect the DVD+VCR’s DIGITAL AUDIO OUT accessory component, using the optional audio/video jacks (COAXIAL X) to the corresponding in jack cables. (Refer to page 24 for “Re
Résumé du contenu de la page N° 14
• AUTO CLOCK SET Initial Settings - Initial Settings - VCR VCR The Auto Clock Set feature is set to ON at the fac- tory. In the ON setting, the DVD+VCR looks for a By using the VCR Setup menu, you can make channel carrying XDS (Extended Data Services) various adjustments to items such as clock setting, information. XDS updates the clock using the and timer recordings. Coordinated Universal Time. Your DVD+VCR allows Remote Control adjustment - Use b / B to choose ON or OFF. of several features
Résumé du contenu de la page N° 15
TUNING SETUP This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Auto Channel Programming FUNCTION OSD The on-screen display can be turned on or off. AUDIO MODE The DVD+VCR has two separate audio playback sys- tems, the high quality VHS Hi-Fi system and standard NORMAL mono system. The same audio is generally recorded on both systems. The VHS Hi-Fi system 1. Choose the
Résumé du contenu de la page N° 16
LANGUAGE Initial Settings - D Initial Settings - DVD VD LANGUAGE By using the DVD Setup menu, you can make vari- ous adjustments to items such as picture and sound. English Menu Language Disc Audio Original You can also set a language for the subtitles and the Disc Subtitle Original Setup menu, among other things. For details on each Disc Menu Original Setup menu item, see pages 16 to 19. To display and exit the Menu: Move Select Press SETUP MENU to display the menu. A second press of SETUP
Résumé du contenu de la page N° 17
4. When the confirm menu appears on your screen DISPLAY “Cancel” is highlighted as default. Use the b button to highlight “Enter”. DISPLAY TV Aspect 4 : 3 Display Mode Letterbox Progressive Scan Off Move Select 5. Pressing ENTER / OK will set this unit to DVD TV Aspect progressive scan mode. 4:3 : Select when a standard 4:3 TV is connected. Notes: 16:9 : Select when a 16:9 wide TV is connected. • If you set Progressive Scan to ON in error, you must reset the DVD+VCR. Press STOP (
Résumé du contenu de la page N° 18
AUDIO DVD DRC (Dynamic Range Control) Each DVD disc has a variety of audio output options. With the DVD format, you can hear a program’s soundtrack in the most accurate and realistic Set this unit’s AUDIO options according to the type of presentation possible, thanks to digital audio technology. audio system you use. However, you may wish to compress the dynamic range AUDIO of the audio output (the difference between the loudest Dolby Digital Bitstream sounds and the quietest ones). This allo
Résumé du contenu de la page N° 19
OTHERS REMOTE CONTROL FUNCTION The Auto Play, and B.L.E. settings can be changed. Remote Control A/B/C Code Switching The remote control is capable of controlling three JVC video units independently. Each of the units can OTHERS respond to one of three codes (A, B or C). PBC On Auto Play On The remote control is preset to send C code signal B.L.E. Off because your unit is initially set to respond to C code signal. You can easily modify your unit to respond to A or B code signal. Move Select PB
Résumé du contenu de la page N° 20
Operation This chapter describes how to operate the VCR and Manual Tracking DVD. To manually adjust the tracking use the CH -/+ buttons during playback. VCR VCR T Tape Pla ape Playbac yback k Notes: Press the VCR button to select the device to be operated. • Vertical jitter requires a very fine adjustment. • Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than Basic Instructions 3 seconds. 1. Turn on the TV. Search 2. Tune the TV to
