Instruction d'utilisation Bissell BS-7920F

Résumé du contenu de la page N° 1

Care and General Maintenance of your Bissell Cleaner


CONTENTS PAGE

BS-7920F Pro Heat Pro-Tech………….………………………Page 2

BS-1694F Powerwash Delux…………………………………..Page 4

BS-1950F Quickwash…………………………………………..Page 6

BS- 3750F Lift Off……………………………………………….Page 7































Prepared by Monique Lania 1Care & Maintenance of Bissell Deep Cleaner

Résumé du contenu de la page N° 2

BS-7920F Pro Heat Pro-Tech Cleaning of the Red Lint Filter Remove tank-in-tank assembly from unit Remove the lid from tank and turn the lid upside down Remove red lint basket from tank lid and remove any debris stuck in lint basket with your finger tips or an old toothb rush. If it is really dirty soak in hot water for 30 minutes and replace it back into machine Once clean the red lint filter basket must be clicked securely in place and sealed to ensure maximum

Résumé du contenu de la page N° 3

Cleaning of front window nozzle Fill the Tank-in-Tank with clean tap water and fill the SmartMix Bottle with hot (not boiling) tap water. Switch grey SmartMix Switch located next to solution SmatMix bottle to ‘Normal’ and switch diverter knob to ‘Carpet Cleaning’ setting Use the machine on hard surface such as concrete to suck up a quantity of clean water. This will remove any solution build-up. Empty Collection Tank and SmartMix bottle at the end of the proce

Résumé du contenu de la page N° 4

BS-1694F Powerwash Delux Cleaning of the Red Lint Filter Remove tank-in-tank assembly from unit Remove the lid from tank and turn the lid upside down Remove red lint basket from tank lid and remove any debris stuck in lint basket with your finger tips or an old toothb rush. If it is really dirty soak in hot water for 30 minutes and replace it back into machine Once clean the red lint filter basket must be clicked securely in place and sealed to ensure maximum sucti

Résumé du contenu de la page N° 5

Cleaning of front window nozzle Fill the Tank-in-Tank with clean tap water and fill the SmartMix Bottle with hot (not boiling) tap water. Switch grey SmartMix Switch located next to solution SmatMix bottle to ‘Normal’ and switch diverter knob to ‘Carpet Cleaning’ setting Use the machine on hard surface such as concrete to suck up a quantity of clean water. This will remove any solution build-up. Empty collection tank and SmartMix bottle at the end of the proced

Résumé du contenu de la page N° 6

BS-1950F Quickwash Cleaning Delivery Tank Remove delivery tank and thoroughly rinse using hot (not boiling) tap water Cleaning underneath the front window nozzle Fill delivery tank with clean water only. Use machine on concrete to suck up a quantity of clean water. Wipe underneath surface with a soft cloth Ensure after each use that hair and debris are removed from the brush. This will prolong the life of the brush. Remove and empty Dirty Wa

Résumé du contenu de la page N° 7

BS- 3750F Lift Off – Refer to Yellow piece of paper supplied with machine Empty the clear plastic Dirt Container Switch off the cleaner and unplug it from the electrical outlet Place vacuum in upright position Slide the Lock ‘n Seal Lever to the ‘unlock’ position Grasp the handle and pull the Dirt Container straight out to remove from vacuum Empty dirt into garbage container Rinse plastic container in warm (not boiling), tap water (you can also use a mild detergent) and dry thorough

Résumé du contenu de la page N° 8

Clean the filters 1. Upper-tank Filter Switch off the cleaner and unplug it from the electrical outlet The upper tank filter can be reached by removing the Dirt Container, reaching in underneath the Upper Tank and turning the rim of the red Filter Frame to unlock. Pull it straight down to remove. Brush the dirt off the Upper Tank and Louvers. The foam Upper Tank filter may be removed and hand washed in cold tap water with a mild detergent. Rinse well and then air

Résumé du contenu de la page N° 9

3. Hepa 12 Media Post-Motor Filter The HEPA Filter is located on the back of the cleaner behind the white door Open the door, pulling it downwards, remove the filter and gently tap it against the palm of your hand to remove access dust and dirt. Replace filter if necessary Prepared by Monique Lania 9Care & Maintenance of Bissell Deep Cleaner