Résumé du contenu de la page N° 1
AUTOMATIC SCRUBBER
MODELS: SCC172 QSCC172 SCH172
10066320 10066300 10066350
SCHC172 HCC172 QSCC172IA
10066330 10066270 10066310
QSCC172IS AS17 AS17B
10066080 10066210 10066220
AS17T AS17TH AS17E
10066250 10066260 10066230
AS17I QSC172
10066240 10052700
IPX4
Read these instructions before using the machine
H
86221970
PRV NO 980282
Résumé du contenu de la page N° 2
MACHINE DATA LOG/OVERVIEW MODEL _______________________________________ DATE OF PURCHASE __________________________ SERIAL NUMBER ______________________________ SALES REPRESENTATIVE # _____________________ YOUR DEALER Name: ________________________________________________________________________________________________ Address: _________________________________________________________________
Résumé du contenu de la page N° 3
TABLE OF CONTENTS PARTS LIST Machine Data Log/Overview................................2 Table of Contents.................................................3 Decal .................................................................. 5-1 Control Panel-w/Charger.................................... 5-3 HOW TO USE THIS MANUAL Control Panel-SCHC172 w/Charger .................. 5-5 Control Panel-SCH172....................................... 5-7 How to use this Manual............................
Résumé du contenu de la page N° 4
HOW TO USE THIS MANUAL The SAFETY section contains important information This manual contains the following sections: regarding hazard or unsafe practices of the machine. Levels of hazards are identified that could - HOW TO USE THIS MANUAL result in product or personal injury, or severe injury - SAFETY resulting in death. - OPERATIONS - MAINTENANCE The OPERATIONS section is to familiarize the - PARTS LIST operator with the operation and function of the machine. The HOW TO USE THIS
Résumé du contenu de la page N° 5
IMPORTANT SAFETY INSTRUCTIONS When using a battery powered appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. To reduce the risk of fire, electric shock, or injury: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual. Use only manufacturer’s recommended components and attachments. If the machine is not working properly, has been dropped, damaged, left outdoors, o
Résumé du contenu de la page N° 6
HAZARD INTENSITY LEVEL The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death. CAUTION - Hazards or unsafe practices which could result in minor person
Résumé du contenu de la page N° 7
SAFETY LABEL LOCATION NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them. FLAMMABLE MATERIALS CAN CAUSE EXPLOSION OR FIRE. DO NOT USE OR PICK UP FLAMMABLE MATERIAL. SAFETY LABEL 86252540 PRV NO. 81505 BATTERY CAUTION 86252520 PRV NO. 80885 86221970 17” SCRUBBER 01/24/07 2-3
Résumé du contenu de la page N° 8
TECHNICAL SPECIFICATIONS ITEM DIMENSION/CAPACITY Rated Voltage 24 VDC Rated Amperage 30 Amps Batteries 2 x 12 Volt 105-130 AH Scrub Brush Motor 0.75hp (0.56 kw) Vacuum Motor 24 VDC 2 stage by pass Mass (GVW) 319 lbs (144.7 kg) Weight empty without batteries 142 lbs (64.4 kg) Solution Control Gravity feed, fully variable Solution tank capacity 8 Gal (30.3 ℓ) Recovery tank capacity 10 Gal (37.9 ℓ) Scrub brush diameter 17 in (430 mm) Scrub brush pressure 33 lbs (15 kg) Scrub
Résumé du contenu de la page N° 9
TECHNICAL SPECIFICATIONS ITEM MEASURE Height 35 in (0.89 m) Length 42 in (1.07 m) Width without squeegee 20 in (0.51 m) Width of squeegee 31 in (0.79 m) Width of scrub path 17 in (0.43 m) Length Width Height SPECIAL NOTES: The overall root-mean-squared acceleration at the The A-weighted sound pressure level emitted by the operator’s arms was measured to be less than 1.0 appliance was me
Résumé du contenu de la page N° 10
HOW THIS MACHINE WORKS The function of the scrub system is to scrub the This Automatic Scrubber is a battery powered, hard floor. The scrub system consists of a rotary type floor scrubber intended for commercial use. The disk scrub brush, motor, and lift linkage. The brush appliance applies a cleaning solution onto a hard scrubs the floor and the motor drives the brush. The floor, scrubs the floor with a brush, and then brush lift lever raises and lowers motor and brush. vacuums the
Résumé du contenu de la page N° 11
COMPONENTS 5 1 3 2 4 9 13 7 10 12 11 8 14 6 1. Control Panel 9. Solution Tank Drain Hose 2. Control Handle 10. Solution Strainer 3. Recovery Tank 11. Solution Tank Support Lanyard 4. Recovery Tank Drain Hose 12. Squeegee 5. Recovery Tank Domel 13. Vacuum Motor 6. Scrub Brush/Pad 14. Solenoid Valve 7. Solution Tank 8. Solution Tank Cover 3-4 8622
Résumé du contenu de la page N° 12
CONTROLS 5 9 1 6 4 2 8 7 3 1. Solution Control Lever 6. Battery Charge Level Indicator 2. Brush Switch 7. Hour Meter 3. Brush Lift Pedal 8. Circuit Breaker 4. Vacuum Switch 9. Brush Reverse Switch 5. Squeegee Lift Lever 3-5 86221970 17” SCRUBBER 01/03/07
Résumé du contenu de la page N° 13
CONTROLS 1. SOLUTION CONTROL LEVER 6. BATTERY CHARGE LEVEL INDICATOR Controls solution flow to scrub deck. Indicates the charge level of the batteries. To increase flow push the knob forward to the The meter display is divided into 10 vertical desired flow. bars. Bars illuminated on the top indicate full charge. Bars flashing near the bottom indicate To decrease flow pull the knob back. the batteries should be recharged. Further operation of the machine could damage the 2. BRU
Résumé du contenu de la page N° 14
MACHINE OPERATIONS PRE-RUN MACHINE INSPECTION NORMAL SCRUBBING Do a pre-run inspection to find possible problems Plan the scrubbing pattern in advance. The longest that could cause poor performance or lost time from track is around the perimeter of the area to be breakdown. Follow the same procedure each time to cleaned. For efficient operation, the runs should be avoid missing steps. the longest possible without turning, stopping, or raising and lowering scrub brush/squeegee. NOTE
Résumé du contenu de la page N° 15
MACHINE OPERATION TO BEGIN SCRUBBING The length of time between the first and second pass depends on the amount of accumulation and the type of chemical being used. A second scrubbing with the squeegee down, vacuum on and When operating the machine around people, pay again with solution and brush on will further loosen close attention for unexpected movement. Use the soil. The additional application of solution will extra caution around children. further assist the difficult cleaning j
Résumé du contenu de la page N° 16
MAINTENANCE BATTERIES (WET CELL BATTERIES ONLY) The batteries provide the power to operate the When servicing machine, avoid contact with machine. The batteries require regular maintenance battery acid. to keep them operating at peak efficiency. The machine batteries will hold their charge for long periods of time, but they can only be charged a Batteries emit hydrogen gas. Explosion or fire certain number of times. To get the greatest life can result. Keep sparks and open f
Résumé du contenu de la page N° 17
MAINTENANCE CHECKING BATTERY SPECIFIC GRAVITY TO CHARGE THE BATTERIES Use a hydrometer to check the battery specific gravity. When servicing machine, avoid contact with battery acid. Batteries emit hydrogen gas. Explosion or fire Battery Check can result. Keep sparks and open flame away. Keep covers open when charging. Wear eye protection and protective clothing when working with batteries. Charge batteries in a well ventilated area. Leave t
Résumé du contenu de la page N° 18
MAINTENANCE MACHINES WITHOUT ONBOARD CHARGER CHANGING BATTERIES Use a 24 volt, 12 amp maximum output, DC charger Stop the machine in a clean area next to the which will automatically shut off when the batteries charger. Turn off machine. are fully charged to charge the two battery pack. FOR SAFETY: Before leaving or servicing the 1. Stop the machine in a clean, well ventilated area machine; stop on level surface, turn off machine. next to the charger. 1. Drain recovery tank
Résumé du contenu de la page N° 19
MAINTENANCE SCRUB BRUSHES FINISHED FLOORS NOTE: All original equipment brushes are equipped Nylon bristles are used in a variety of applications on coated or uncoated surfaces. with “Perform Alert ©”. This feature will tell the operator when it is time to replace the scrub brush. White Pads (Polishing) are used for dry polishing to “Perform Alert ©” brushes have pre-trimmed bright achieve a high-gloss appearance, or surface yellow tufts to indicate the length of a worn out
Résumé du contenu de la page N° 20
MAINTENANCE REPLACING OR REMOVING SCRUB BRUSHES SQUEEGEE BLADES The front squeegee blade allows solution to pass 1. Turn the machine off. through channels in the blade into the squeegee assembly while maintaining vacuum to provide lift. FOR SAFETY: Before leaving or servicing the machine; stop on level surface, turn OFF The rear blade wipes the floor to a near dry machine. condition. It is important the rear blade be in good condition to properly do its job. 2. Raise t
