Résumé du contenu de la page N° 1
Haier Network Air Conditioner
Two by One Room Air Conditioner
AD422BMBAA
CONTENTS
Before Use
Operation Points************ 1
Name of Parts*************2-3
Safety Precautions**********4-5
Operation Instruction
Fan Operation***************
Auto, Cooling, Dehumidifying,
Heating operation************7
Timer On/Off Function*********8
Timer On-Off Function ********9
Sleep Function*************10
Usersí Attention************11
Maintenance
Maintenance*************12-13
Troubleshooting********** 14-16
In
Résumé du contenu de la page N° 2
Characteristics of Products Characteristics of Products 1.Prompt temperature adjustment. 2.Inner hidden type installation, space saving. 3.Large screen LCD display, easy and convenient operation. 4.Super quiet design. 5.Powerful circular air volume. 6.This air conditioner has POWER FAILURE RESUME FUNCTION. During the operation of the unit, if there is a sudden power failure, when the power resumes, the unit will resume the previous operation mode. 7.This unit has the function of far distan
Résumé du contenu de la page N° 3
Operation points Operation of air conditioner Anti-cold air blowing out When the ambient humidity is too high, During Heating operation, after starting in COOLING or DEHUMIDIFYING the unit, the indoor fan motor will not mode, there may be water rotate immediately Please wait dropped in to prevent cold the air air from ? outlet. blowing out.* Defrosting function 3-minute protection function During Heating operation, when frost formed If start the unit immediately only after it on the heat exchang
Résumé du contenu de la page N° 4
Name of Parts 3 1 2 * Air outlet * Air inlet * Ventilation hole 2
Résumé du contenu de la page N° 5
Name of Parts Wire Controller 14 15 16 17 18 19 13 12 11 10 FAN SWING MODE 9 AUTO 20 TEMP 8 21 SET 7 CLOCK 22 6 SLEEP SET TIMER 23 SUR 5 22.Setting button 24 FILTER RESET RESET 4 25 Used to confirm 26 3 the time of timer ON/OFF 27 and clock 2 28 23.Sleep button 1 Used to set Sleep 13.Sleep state display 1.ON/OFF button state 14.Network control display Used to turn on/off unit 24.Time Adjusting 2.Temperature display 15.Working mode display button 3.Clock display Working Auto Cooling
Résumé du contenu de la page N° 6
Safety Precautions Before starting the unit, please read the following ìSafety Precautionsî carefully to guarantee the normal operation of the system. The following lists two kinds of safety precautions ì Warningî and ì Noticeî. For the items that the improper use may cause death or serious injury are listed in ì Warningî volume. However, sometimes the items listed in ì Noticeî volume may also cause serious accidents. So, these two volumes are the important contents related to safety, th
Résumé du contenu de la page N° 7
Safety Precautions Notice Do not put the fire Do not put or use any The system should never be devices in the places, spray near the air used for any other purposes which the air from the conditioner, and do not than intended such as for air conditioner can directly spray to the air preservation of food, flora and directly blow. conditioner. fauna, precision devices or work of art. It may cause the fire devices cannot burn It may cause deterioration of Otherwise it may cause completely. the arti
Résumé du contenu de la page N° 8
1 4 2 Operation instruction Fan operation 1 Turn on the unit Press the ON/OFF button to turn on the FAN SWING MODE unit The LCD display of the wire controller 3 TEMP will show the previous working state (except for Timer, Sleep, Swing mode), the operation SET CLOCK indicator light on the wire controller will light TIMER SLEEP up. FILTER RESET RESET 2 Choose of working mode Press MODE button, each press the ON/OFF working mode will change as the following sequence: . HEATING FAN AUTO COOLING DEH
Résumé du contenu de la page N° 9
Operation instruction Auto/Cooling/Dehumidifying/Heating operation 1 Turn on the unit Press the ON/OFF button to turn on the 2 MODE FAN SWING unit The LCD display of the wire TEMP 4 controller will show the previous working state (except for TIMER, SWING, SLEEP 3 CLOCK3 SET mode). The operation indicator light on SET SLEEP TIMER the wire controller will light up. FILTER RESET RESET 2 Choose of working mode 5 Press MODE button, each press the ON/OFF 1 working mode will change as the following seq
Résumé du contenu de la page N° 10
Operation instruction Timer On/Off function Before using TIMER function, calibrate the clock first (referring to page 3). When you wake up in the morning, before going back to home after work or after going to bed, you FAN SWING MODE can let your air conditioner automatically turn TEMP on or turn off. SET CLOCK 1.Turn on the unit SET TIMER SLEEP After turning on the unit, set the desired working mode. FILTER RESET RESET The LCD of the wire controller will show working mode. (except for Timer, Sl
Résumé du contenu de la page N° 11
Operation instruction Timer On-Off function 1.Turn on the unit After turning on the unit, set the desired working mode. The LCD of the wire controller will show MODE FAN SWING working mode. (except for Timer, Sleep, TEMP Swing) CLOCK SET 2.Set of TIMER mode SET SLEEP 6 TIMER Press the TIMER button to change the FILTER RESET5 RESET TIMER mode, each press the TIMER mode will change as the following sequence: ON/OFF Blank ON OFF ON OFF AM AM PM PM TIMER ON TIMER OFF TIMER ON-OFF Then choose
Résumé du contenu de la page N° 12
Operation instruction Sleep operation Before going to bed, you can press the SLEEP button, the air conditioner will operate in comfort sleep mode to make you have a sound sleep. Before using this function, you should calibrate the clock first, otherwise, the SLEEP function will be out of order. Use of SLEEP function After turning on the unit, setting the working mode, then press SLEEP button to make the air conditioner have the previous Sleep time (powered on for the first time or after performi
Résumé du contenu de la page N° 13
Usersí Attention If do not use the air conditioner for Do not press tightly with the LCD part of a long time, it is necessary to cut off the wire controller to avoid damage of it. power. Set proper room temperature Cut off If do not cut Not too low or high and make every peop- power suplay off power, the le in the Heating is unit may consume room Cooling is 18~23* power. In order to protect the unit, 26~28* feel before using the air conditioner again, comfortable. turning on the power at least 1
Résumé du contenu de la page N° 14
Maintenance Notice The repair can only be performed Before touch the wire connection by the professional workers. device, cut off the power first. Notice Only after turning off the unit and Do not use water to clean the air cutting off the power can the conditioner. cleaning of the unit be performed. Otherwise, it Otherwise, it may cause electric shock may cause or injury. electric Donít in operation shock Use stable stand support. Please pay high attention when cleaning the unit Clean the air
Résumé du contenu de la page N° 15
Maintenance Maintenance before and after the using season. Before using season 1.Check the following items: If the air inlet and outlet of indoor and outdoor unit are blocked. If the earth wire is proper. If the wire connection is proper. If there is abnormal phenomenon, please ask the after-sale service staffs for help. 2.Cleaning the air filter or air inlet and casing After cleaning the air filter, it must be reinstalled. 3.Turn on the power After turn
Résumé du contenu de la page N° 16
Troubleshooting The following phenomena are not troubles Symptom Cause Hear the sound When the air conditioner is started; during operation of water flow the compressor starts or stops; or when the unit is stopped; sometimes it gives the sound of ìHua, Huaî or ìGudu, Guduî. This is the sound of the refrigerant circulation, not trouble. It is caused by the hot expansion and cold shrink of Gives ìPi, Paî sound the plastic part. Sometimes the air sent from the indoor has peculiar smell, Having pecu
Résumé du contenu de la page N° 17
When Troubles Occur Before asking the commissioned repair center for help, please check the air conditioner according to the following items. The air conditioner can not start Is the power If the city electric If the wire controller If the earth switch creepage breaker power supply is is directly shined by connected? works? normal? sunshine or affected with damp. ON Please cut off OFF The power power switch is immediately and not at ON contact with position. suppler. Bad cooling effect Did you a
Résumé du contenu de la page N° 18
When Troubles Occur When the following phenomena appear, please contact the commissioned repair center. Warning If finding any abnormal phenomena (such as adust smell), cut off power first, then ask the after-sales service workers for help. If still using the air conditioner in this condition, the air conditioner may be damaged and causes electric shock or fire accident. After taking the following measure, Symptom then contact the commissioned repair center The safety equipment, such as fuse, br
Résumé du contenu de la page N° 19
Installation instruction Before installing, do read this ìSafety precautionsî carefully to guarantee the proper installation. The below attentive matters are divided into ì Warningî and ì Noteî two parts. When the wrong installation occur, it is very possible death and severe injury and other serious accidents will happen. For those items are listed in ì Warningî part. But even the items listed in ì Noteî part can also cause serious accidents. Above all, both the two parts are very important
Résumé du contenu de la page N° 20
Installation instruction Notice This manual can not include all kinds of conditions, if you have new requirements and questions, please contact with local Haier Sales Center. Warning Before installing the unit, please read this manual carefully. Improper installation may cause accidents and make unit damage or death. Installation tools 1. Screwdriver 2. Steel saw 3. 60, 70mm diameter drill 4. Spanner (diameter 17,27mm) 5. Spanner (14, 17, 19, 27mm) 6. Pipe cutter
