Résumé du contenu de la page N° 13
Clearing blockages Service 4. If you have a Remove large items from surfaces To obtain approved HOOVER service and before vacuuming to prevent blockages problem genuine HOOVER parts, locate the neare s t and to maintain cleaning effectiveness Hoover Factory Service Center or of your cleaner. If a minor problem occurs, it usually can Authorized Hoover Warranty Service be solved quite easily when the cause is D e a l e r ( D e p o t ) b y : Refer to the following steps to check for found. Therefor
Résumé du contenu de la page N° 14
Full One Year Warranty (Domestic Use) Your HOOVER® appliance is warr a n t e d in normal household use, in accord a n c e with the Owner’s Manual against original defects in material and workmanship for a period of one full year from date of pur- chase. This warranty provides, at no cost to you, all labor and parts to place this appliance in correct operating condition during the warranted period. This warr a n- ty applies when the appliance is pur- chased in the United States including its t e
Résumé du contenu de la page N° 15
15
Résumé du contenu de la page N° 1
Owner’s Manual
English pp. 1-14
Spanish pág. 16-23
French p. 25-31
™
B reathe Easy
Résumé du contenu de la page N° 2
Review this manual before operating cleaner. Thank you for choosing a HOOVER product. Please enter the COMPLETE model and serial numbers in the spaces provided. Model__________________________________________ Serial number___________________________________ Hint: Attach your sales receipt to this owner’s manual. Verification of date of purchase may be required for warranty service of your HOOVER product. Be sure to fill out and return the product registration card included with your cleaner (see
Résumé du contenu de la page N° 3
If you need any assistance call: Visit our website at www.hoover.com. Click on the “Service” button to find the service outlet nearest you OR 1-800-944-9200 for an automated referral of service outlet locations (U.S. only) OR 1-330-499-9499 to speak with a representative in our Consumer Response Center. Please do not return this product to the store. 1. Cleaner Assembly Carton contents Empty carton. Find the parts shown 1-1 before disposing of packing materials. A. Upper handle E B. Lower ha
Résumé du contenu de la page N° 4
Assemble handle Attach cord 1-2 1-3 A “UP” G B C D E F D N o t e : The small red tab (E) above the ON/OFF switch (F) is for Place upper (B) and lower (C) handle sections on a flat surface shipping purposes only and may fall off during assembly. If it with cord hooks (A) on top. With hands on sides of handle sec- does not fall off, the tab will be removed during the final steps of tions, push sections together firmly until they “click” into place. a s s e m b l y. *Do not press against the rod (D
Résumé du contenu de la page N° 5
Attach tool rack 1-10 1-11 1-12 Hook tool rack over left edge of handle, Hold rack and handle side by side as Holding tool rack in place, turn handle over matching arrows and letters. s h o w n . and align screw holes. Insert small screw and tighten secure l y. (Extra eff o rt may be re q u i re d . ) 1-14 1-15 Attach handle 1-13 N Push bolt into hole on lower f ront of handle. Place n u t in recessed area at back of h a n d l e. Hold nut in place while tightening With cord hooks to the back, pl
Résumé du contenu de la page N° 6
1-20 1-21 Attach filter bag 1-19 U V T Push bag collar firmly onto dirt tube. To replace bag door, insert the tabs (V) Tuck top and bottom of bag into bag on bottom of bag door into the slots on Align opening (U) in filter bag with dirt compartment. bag compartment. tube (T) inside bag compartment. Make sure all edges of paper bag are completely inside the bag compartment. Close door. 1-24 1-22 Attach hose and E tools 1-23 Break off red tab (E) above ON-OFF Stretch hose over tool rack and inser
Résumé du contenu de la page N° 7
r 2. How to use Cleaner description 2-1 The assembled cleaner will look like the drawing. 1 1. Handle 2. Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for easy cord release. 4 3 2 3. Extra belt storage: inside bag compartment 15 4. Bag door latch 15 5. ON/OFF switch: located on side of handle. 18 6. Bag door 17 7. Stair cleaning handle: located on lower edge 5 6 of bag. 16 8. Handle release lever: step on lever to lower 20 handle to operating or low
Résumé du contenu de la page N° 8
2-4 2-5 Transporting cleaner The cleaner can also be moved by lifting it as shown. To move your cleaner from room to room, put handle in upright position, tilt cleaner back on rear wheels and push forward. For maximum cleaning performance, t h e 2-6 2-7 C following carpet height settings are re c o m- m e n d e d . • Setting 1: for all types of carpet • Higher Settings*: for very deep pile car- D pet where easier pushing eff o rt is desire d , while maintaining good cleaning perf o r- B m a n c
Résumé du contenu de la page N° 9
2-11 2-12 2-13 1 2 3 E 4 Cleaning tools Attach hose to Select proper tool The tool set includes a hose, wand, cleaner 1. Dusting brush may be used for crevice tool, furniture nozzle and dusting carved furniture, table tops, books, Turn cleaner OFF before attaching or brush. lamps, lighting fixtures, venetian blinds, removing hose. baseboards, shutters, and registers. With cleaner handle in upright position, 2. Furniture nozzle may be used for open hose door and insert hose connec- upholstered fu
Résumé du contenu de la page N° 10
Where to buy 3. Maintenance Filter bags may be purchased from your local Authorized Hoover Dealer (Depot), The following sections are concerned Leading Retailers, from Hoover Factory with proper maintenance of the cleaner. Service Centers, using the order form Familiarize yourself with these home packed with your cleaner, or through maintenance tasks and keep this owner’s The Hoover Company online at manual in a convenient place where you www.hoover.com. can refer to it when needed. Proper use
Résumé du contenu de la page N° 11
3-4 3-5 The headlight What to buy This cleaner uses a 12 volt, wedge base type 912 bulb, Hoover P a r t No. 27313-101. How to replace Disconnect cleaner from electrical outlet. Installing bulb and reposition- ing hood Pull old bulb straight out of socket. Push new bulb straight into socket until locked in place. Excessive force is not required. Removing hood Reposition hood and push firmly to snap Place handle in low position and turn clean- it into place on the sides and at the front. er over.
Résumé du contenu de la page N° 12
3-10 3-12 3-11 I J Replacing bottom plate Belt storage Installing brush roll Grasp brush roll firmly and fit it into Line up bottom plate with front edge of An extra belt can be stored in the belt position by first sliding belt side into the cleaner and rotate it into position. storage area located inside the bag rectangular slot (I) on side of cleaner. compartment. Reposition the 2 Phillips head screws. Tighten screws securely. Open bag door and stretch belt onto Pull other side of brush roll (
