Instruction d'utilisation Dyson DCO3

Résumé du contenu de la page N° 1

DCO3 Operating manual
DCO3 Absolute
DYSON CUSTOMER HELPLINE
7000 435 7546
Mon-Fri 9am-6pm, Sat 9am -1pm

Résumé du contenu de la page N° 2

DCO3 quick reference page Fit adaptor tool to reverse wand Brush control system The brush control system is a simple device to allow cleaning of hard floors by switching off the brushbar. The height adjusts automatically. (NEUTRAL) OFF for cleaning delicate rugs and floors. Cover cap/ Select manually (NEUTRAL). Return to (PARK) position storage hook after use. ( ) PARK OFF for when the cleaner is left running in the upright position and when the hose is in use. Cable winder ( ) DRIVE ON for

Résumé du contenu de la page N° 3

Blockages and brushbar Unplug your cleaner before carrying out any maintenance. Cyclone entry Blockage removal cassette catch duct 2 4 1 3 1 Using a coin, undo the yellow fastener 2 Remove wand from hose and look 3 Pull back catch, remove cassette and to remove the quick release window. down the wand to check for daylight. check for blockage. To replace, position 0 Check for blockage at the bottom of the Locate blockage removal cassette catch at 45 and click catch back into place. duct and under

Résumé du contenu de la page N° 4

Bin emptying Do not fill bin above maximum line. Keep small holes clear of dust and fluff. 1 2 3 4 5 Optional 1 Push Cyclone release catch forward to 3 Push bin release catch forward to free 5 To clean bin, wash in warm water. free Cyclone assembly. the bin. Ensure bin inner and seals are replaced correctly and that the bin is 2 Pull Cyclone assembly away from the 4 Wrap a plastic bag firmly around the completely dry before reassembling. TM machine. rim of the clear bin and empty (wait ten sec

Résumé du contenu de la page N° 5

Washing your pre-motor filter Dyson DCO3 lifetime filters have been developed to give you a vacuum cleaner with lifetime filtration, which means no additional running costs. The Dyson lifetime filters are: Lifetime HEPA + bacteria-killing screen pre-motor filter Lifetime HEPA post-motor filter The lifetime pre-motor filter should be washed every 6 months. Switch off and unplug cleaner before removing the filter. Foam core 1 Rotate twist ring to the left to release filter case. Remove filter cas

Résumé du contenu de la page N° 6

WHEN USING THE DYSON DC03 VACUUM CLEANER Important safety instructions PLEASE ADHERE TO THESE SIMPLE PRECAUTIONS PLEASE READ CAREFULLY BEFORE USE By doing so you will reduce the risk of fire, electrical shock or injury. Check that your supply corresponds to that shown on the rating plate. The • Do not leave the vacuum cleaner plugged into the mains socket outlet. appliance must only be used as rated, and it should be fitted with an approved Unplug from the outlet when not in use and before cle