Instruction d'utilisation Xantech HL95

Résumé du contenu de la page N° 1

DESCRIPTION

The Hidden Link IR Receiver is a small shelf-top infrared repeater assembly. It

includes an IR receiver and a CB12 Connecting Block. The Hidden Link IR

Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which

is plugged directly into the “IR RCVR” jack on the CB12. It can also be plugged

into the “AUX” or “IR RCVR” jack of other Xantech connecting blocks, such as

the models 789-44, CB60, and 791-44. The Hidden Link IR Receiver is

primarily

Résumé du contenu de la page N° 2

INSTALLATION CABLE CONNECTIONS HL95’s may also be used where the 7-foot cable is not long enough. Simply cut off the mini plug, strip the leads and splice them to a 3-conductor extension QUICK-START cable with a terminal block or other means. Then connect the extension cable A typical system will use an IR receiver, several emitters, and a power supply to the 3-terminal block on the CB12 as shown in the figure below. all connected to a connecting block. 1. Connect the IR recei

Résumé du contenu de la page N° 3

REMOTE ROOM APPLICATION TROUBLE SHOOTING: The CB12 Connecting Block, supplied with the Hidden Link IR Receiver, has a 1. Perhaps the most common problem you may encounter is stray IR three terminal input strip for connection of external infrared receivers should (infrared) or RF (radio frequency) interference preventing proper you wish to control your equipment from other rooms. operation of the controlled equipment. • Fluorescent, Compact Fluorescent, Neon or Halogen lights, • The te

Résumé du contenu de la page N° 4

Limited Warranty Xantech® warrants its products to be free of defects in materials or workmanship. This is a Limited Lifetime warranty from the date of purchase by the original consumer. Any products returned to Xantech and found to be defective by Xantech within the warranty period will be repaired or replaced, at Xantech’s option, at no charge. Xantech will not be responsible for the actual cost of installation or removal of the product, nor for any incidental or consequential damages.