Résumé du contenu de la page N° 1
AVEX R6
Remote Control
Owner’s Manual
Résumé du contenu de la page N° 2
Congratulations! Congratulations on purchasing Universal Remote Control’s AVEX R6 Pre--Programmed and Learning remote control. You now have the power to control your entire home entertainment system with one easy-- to--use remote. The AVEX R6 can be used with thousands of audio/video components because of the extensive library of codes that have already been programmed into the remote. So... get ready to sit back, relax, and simplify your home entertainment experience. This Owner’s Manual is d
Résumé du contenu de la page N° 3
Table of Contents Getting Started - Overview • Control up to 6 Components ......................4 • Component Buttons ...................................4 • Battery Installation.....................................4 • Low Battery Warning.................................5 • Couch Mode ............................................5 Keypad Layout & Button Functions........6 Programming AVEX R6 Using Pre-Programmed Codes .........................7 • Quick Set-Up Method ..............................
Résumé du contenu de la page N° 4
Getting Started - Overview Control up to 6 Components The AVEX R6 remote control is designed to control up to six different Audio/Video components and operate virtually all brands of AUDIO, TV, DVD, VCR/DVR, SAT/CABLE and AUX (Light, Music Server, etc.) components. Component Buttons Once you have programmed the AVEX R6 for all of your components, all you need to do is press a component button and all the buttons on the AVEX R6 will work with that component. For example, when you press the TV c
Résumé du contenu de la page N° 5
Low Battery Warning When the batteries are low and need to be replaced the component LED will quickly blink three times when you press the Power [ON] button. Couch Mode The AVEX R6 is designed to automatically turn itself off if a button is pressed for more than 30 seconds. This prevents battery power from being depleted should the remote accidentally slip between the couch cushions. Page 5
Résumé du contenu de la page N° 6
Keypad Layout & Button Functions POWER SYSTEM OFF Allows you to turn the Designed to send Power selected component On/Off commands for up to on and off. six components with one button press. TV, CBL,VCR, AUDIO, DVD, AUX GUIDE Used to select the Displays the component you Program Guide want to operate and listings through signals remote the Cable Set control activity. Top Box. CURSOR MENU NAVIGATION Displays the PAD Applications Used for Menu through programming the Cable Set steps and on- Top B
Résumé du contenu de la page N° 7
Programming AVEX R6 using Pre-Programmed Codes There are three different ways you can program your AVEX R6 using the component brand codes that are pre-programmed into the remote. One of these will work for you! • Quick Set-Up Method • Three-Digit Code Entry Method • Auto-Search Method * * * TRY THIS FIRST! Quick Set-Up Method STEP 1: Manually or using your old remote, turn on the component you want to program—for example, to program your TV, turn on your TV set. STEP 2: Point the AVEX R6
Résumé du contenu de la page N° 8
IF QUICK SET-UP DID NOT WORK, TRY THIS NEXT: Three-Digit Code Set-Up Method STEP 1: Find the 3-digit code numbers assigned to your brand from the lists in the back of this manual. The codes are listed by component category (i.e., TV, VCR, DVD, etc.), then by brand name. For instance, if you would like to locate a code for a Sony television, first locate the TV category and then look for the Sony brand. STEP 2: Once you have located the 3-digit codes for each of the components that you wish to o
Résumé du contenu de la page N° 9
STEP 5: Point the AVEX R6 toward the component (in this example the TV) and punch in the first 3-digit code that you wrote down for that specific component. Use the Number buttons 0–9 on the remote to punch in the code. The TV LED light will blink each time a number is pressed. NUMBER BUTTONS If the 3-digit code number you just punched in is the correct number, the component you are trying to program will turn off. If it did not turn off, enter the next code number from your list until it does t
Résumé du contenu de la page N° 10
If the Three Digit Code did not work, try this next: Auto-Search Method The Auto-Search Method is a way you can scan through all of the codes in the table to find the right code for your component. STEP 1: Manually or using your old remote, turn on the component you want to program—for example, to program your TV, turn on your TV set. STEP 2: On the AVEX R6, press the Component button that you want to program (in this case the button that says TV) and the SELECT [SEL] button at the same time.
Résumé du contenu de la page N° 11
STEP 4: Once you have found the right code number and the component has turned off, press the POWER button on the AVEX R6 remote to turn the component back on. Next test the VOLUME and CHANNEL buttons (or PLAY and STOP buttons for VCR and DVD) to make sure they all work. If any of the buttons do not work properly, you need to find a new code. Continue pressing the UP (or DOWN) arrow button until you find a new code that turns off the component and makes the VOLUME or PLAY buttons respond correct
Résumé du contenu de la page N° 12
If Auto Search did not work, try this: Programming AVEX R6 using the Learning Method STEP 1: Line up the AVEX R6 to the remote control you want to ‘learn’ from, head--to--head as shown below. Make sure the heads are one to two inches apart. STEP 2: On the AVEX R6, press the Component button that you want to program (in this case the button that says TV) and the ENTER [ENT] button at the same time. Hold down both buttons for 2 seconds until the TV Component button light turns on. This signals th
Résumé du contenu de la page N° 13
STEP 5: Once the AVEX R6 has learned all the buttons in the selected component mode, press and hold the Component button and ENTER [ENT] buttons at the same time to save the learned functions. The component LED light will blink three times to confirm the programming. Now test all the buttons to make sure they learned correctly. Repeat Steps 1-5 to program any other component modes. If the Learning Method does not work, here are a few suggestions: • If you have a Plasma TV, move to another roo
Résumé du contenu de la page N° 14
Special Advanced Features Programming Automated Activities The AVEX R6 has six Macro buttons (POWER, SYSTEM OFF, A, B, C, D) that are designed to store up to 20 commands in each button. Pressing any one of the Macro buttons, or Automated activity, will send out the series of commands that are stored in that particular button. MacroPower™ Total System On/Off MacroPower makes several devices work together by pressing one button. Imagine the convenience of turning on your TV, your DVD player and
Résumé du contenu de la page N° 15
IMPORTANT: You have 30 seconds to perform the next step while you are in programming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the programming mode and you will have to start over. STEP 2: Press the component button you want to turn on and then the POWER button; repeat for all other components in the order you want them to turn on. The component LED lights will blink once each time you press the POWER button. POWER COMPONENT
Résumé du contenu de la page N° 16
Notes regarding programming multi- commands to Macro buttons: • You can program up to 20 commands on each Macro button. • You can program delays in between commands by pressing the PAUSE button. Each press adds a one-half second delay. • Also, if you add the delay time as the first step of Macro commands, the remote will not send the Macro unless the button is held for two seconds. (This is the Press & Hold Function). • You can also program macro commands in ‘layers’ by pressing the STOP b
Résumé du contenu de la page N° 17
Programming “My Favorites” - Favorite Channel Buttons In Cable mode, the A, B, C, D buttons are also designed to serve as dedicated Favorite Channel buttons. Each button will access one of your favorite channels with just one button press. Here’s how to program Favorite Channels: STEP 1: Press the CBL button to select the Cable mode. STEP 2: Press the ‘A’, ‘B’, ‘C’ or ‘D’ button and the MUTE button at the same time for 2 seconds until the CBL component LED turns on. IMPORTANT: You have 30 sec
Résumé du contenu de la page N° 18
More Favorite Channels You can also use the "A, B, C and D" buttons to program favorite channels. Each button can pro- gram up to 5 favorite channels (or a total of 20 button presses), but you're not limited to using these buttons for only that. You can record any series of button presses into a macro. This is great switching video or audio sources. Here is an example of how to program a macro on the "A" button with three favorite channels. We'll use "25, 50, and 75." STEP 1: Press the device y
Résumé du contenu de la page N° 19
SimpleSound™ Total System Volume Control SimpleSound is one of the most exciting features of the AVEX R6. It gives you total volume control over ALL the components in your system, even those that do not have built--in volume control, such as TIVO, DVD and VCR. SimpleSound saves you the hassle and inconvenience of constantly switching between component modes just to control volume. First you should identify which device in your system will be used to deliver sound. In a basic system, the sound
Résumé du contenu de la page N° 20
STEP 2: Press the VOLUME UP button and then press either the TV or AUDIO component button that you want to use for volume. The Component LED light will blink three times to confirm that it is saved. This sets up three buttons (Volume Up, Volume Down and MUTE) as a group for that component. VOLUME UP Repeat Steps 1-2 for all other components. Note: SimpleSound is what’s technically referred to as a “Punch Through” feature and is not limited to volume control. It can also be applied to other gro
