Résumé du contenu de la page N° 1
RS 4in1 Kam User Manual.fm Page 1 Friday, March 4, 2005 9:09 AM
OWNER’S MANUAL
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Manufacturer’s Codes (Códigos del Fabricante). . . . 43
How Kameleon™ Works . . . . . . . . . . . . . . . . . . . . . . . 2 Setup Codes for Cable Boxes/Converters. . . . . . . 43
Installing Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Setup Codes for Cable/DVR/PVR Combos . . . . . . . 44
Batter
Résumé du contenu de la page N° 2
RS 4in1 Kam User Manual.fm Page 2 Friday, March 4, 2005 9:09 AM 4-IN-ONE REMOTE POWERED BY KAMELEON simplifying the remote control keys for four INTRODUCTION different devices. The RadioShack 4-in-One Remote powered INSTALLING BATTERIES by Kameleon™ is a revolutionary universal remote control that uses Universal Electronics' Kameleon Technology. It is BATTERY USE AND SAFETY designed to control up to four home • Use only new batteries of the required entertainment devices. size and rec
Résumé du contenu de la page N° 3
RS 4in1 Kam User Manual.fm Page 3 Friday, March 4, 2005 9:09 AM OWNER’S MANUAL 1. Push down on the indent marks on the 3. Align the cover with the compartment battery door (located on the back of the opening and replace it. remote) and lift off the cover. ❸ ❶ 4. If batteries are inserted correctly, the display will turn on and show all keys after 2. Place the AA batteries in the any key is pressed. compartment as indicated by the NOTE: Replace the batteries if one of the polarity symbol
Résumé du contenu de la page N° 4
RS 4in1 Kam User Manual.fm Page 4 Friday, March 4, 2005 9:09 AM 4-IN-ONE REMOTE POWERED BY KAMELEON A QUICK LOOK AT THE CONTROLS Use the remote illustration (below) to locate controls and then study the Key Functions (starting on the next page) to learn how they function. NOTE: The remote illustration shows all control keys. In actual operation, only active keys used by the selected device are displayed, and non-active keys are hidden. These controls work like the ones found on your o
Résumé du contenu de la page N° 5
RS 4in1 Kam User Manual.fm Page 5 Friday, March 4, 2005 9:09 AM OWNER’S MANUAL A QUICK LOOK AT THE Use the navigation keys as follows: CONTROLS (Continued) Press MENU to display your device's main KEY FUNCTIONS menu. When a key is pressed, Press GUIDE to display the IR Segment your device's program animates to indicate guide or setup menu. the remote is sending Press INFO to display IR signals to a selected the current channel device. and program Press VCR, TV, CBL/SAT, inform
Résumé du contenu de la page N° 6
RS 4in1 Kam User Manual.fm Page 6 Friday, March 4, 2005 9:09 AM 4-IN-ONE REMOTE POWERED BY KAMELEON In all modes except If features are available DVD, press CH + on your selected (or CH -) to select the device, use the picture- next higher (or lower) in-picture keys as channel. follows: In the DVD mode, press In the TV mode, press CH + (or CH -) to select PIP to switch the PIP the next (or previous) feature on or off. When chapter. programmed for a DVR/PVR enabled Press the number ke
Résumé du contenu de la page N° 7
RS 4in1 Kam User Manual.fm Page 7 Friday, March 4, 2005 9:09 AM OWNER’S MANUAL NOTE: The remote includes a tilt switch DEVICE TABLE that turns on the display when the unit is NOTE: Please refer to the table below when moved. If desired, you can disable this performing the instructions in “Programming feature. See “Setting the Tilt Switch” on Device Control” on page 7. page 12. After programming, the RadioShack 4-in- One Remote will be able to control the following types of devices: PRO
Résumé du contenu de la page N° 8
RS 4in1 Kam User Manual.fm Page 8 Friday, March 4, 2005 9:09 AM 4-IN-ONE REMOTE POWERED BY KAMELEON 4. Use the “Manufacturer’s Codes PROGRAMMING A DVD (Códigos del Fabricante)” (starting PLAYER/ VCR COMBO on page 43) to locate the type of device and brand name and then use the 1. Turn on the device and insert a DVD. number keys to enter the first four-digit code for your device. The IR segment NOTE: Please read steps 2 through 10 will flash once for each digit pressed. If completely
Résumé du contenu de la page N° 9
RS 4in1 Kam User Manual.fm Page 9 Friday, March 4, 2005 9:09 AM OWNER’S MANUAL a. Press VCR. 5. If the TV responds, go to step 6. If the TV does not respond, press CH+. The b. Using the number keys, enter the remote will try the next code. Continue four-digit VCR code for your until the TV responds. device. If performed correctly, the IR segment will flash twice. NOTE: Press CH- to try the previous code. NOTE: If a separate VCR setup code is not 6. To lock in the code, press P. The IR
Résumé du contenu de la page N° 10
RS 4in1 Kam User Manual.fm Page 10 Friday, March 4, 2005 9:09 AM 4-IN-ONE REMOTE POWERED BY KAMELEON 6. To check for codes of other devices, 3. Enter 9 9 3 then press VOL-. The IR repeat steps 1 to 5, but substitute the segment blinks four times. appropriate device key for each device 4. Repeat steps 1 to 3 for any other device you are checking. Write down the that you want to have independent device’s code digits in the appropriate volume control. code boxes on page 8. Now, after you
Résumé du contenu de la page N° 11
RS 4in1 Kam User Manual.fm Page 11 Friday, March 4, 2005 9:09 AM OWNER’S MANUAL 2. Press and hold P until the IR segment USING CHANNEL SCAN flashes twice. 3. Using the number keys, enter 9 9 6. The In all modes, press the SCAN key to start a 3- IR segment will flash twice. second scan of all channels. If programmed, press the FAV SCAN key to scan only your NOTE: If the IR segment displays one favorite channels to view a desired channel long flash, an error has occurred. Try (see “Prog
Résumé du contenu de la page N° 12
RS 4in1 Kam User Manual.fm Page 12 Friday, March 4, 2005 9:09 AM 4-IN-ONE REMOTE POWERED BY KAMELEON 3. Press DVD then VCR. The VCR key is now for other multiple functions you would like to ready to be programmed as your second control with one key press. Moreover, the key DVD player. (see “Programming A you assign to activate your macro can hold up Device” on page 7). to 15 key presses total. NOTE: Only one device can be assigned Macros are not mode-specific. The macro will to an unused
Résumé du contenu de la page N° 13
RS 4in1 Kam User Manual.fm Page 13 Friday, March 4, 2005 9:09 AM OWNER’S MANUAL The sleep timer is now disabled for that CLEARING A MACRO device. Repeat these steps for each device 1. Press and hold P until the IR segment where you want to prevent the use of the sleep flashes twice. timer. 2. Using the number keys, press 9 9 5. 3. Press the key you set up to activate the SETTING THE SLEEP TIMER macro. If you want to set any device to turn off after a 4. Press and hold P until the IR seg
Résumé du contenu de la page N° 14
RS 4in1 Kam User Manual.fm Page 14 Friday, March 4, 2005 9:09 AM 4-IN-ONE REMOTE POWERED BY KAMELEON 2. Using the number keys, enter 9 8 0. The PROBLEM: During programming, the IR segment will flash twice, pause, and IR segment displays a long flash twice again to confirm that all flash. custom programming is cleared. SOLUTION: An invalid entry has occurred. Check the keys to be pressed and start program again. CLEARING ALL PROBLEM: The unit does not control PROGRAMMING home entert
Résumé du contenu de la page N° 15
RS 4in1 Kam User Manual.fm Page 15 Friday, March 4, 2005 9:09 AM OWNER’S MANUAL SOLUTION: If the original remote DEVICE MENU SCREENS control required pressing ENTER to change channels, CBL/SAT MAIN MENU then press ENTER on the remote after entering channel numbers. PROBLEM: No remote control of volume. SOLUTION: See “Changing Volume Lock” on page 10 to lock/ unlock the volume. PROBLEM: IR segment flashes when pressing a key, but home entertainment device does not respond. SOLUTION: M
Résumé du contenu de la page N° 16
RS 4in1 Kam User Manual.fm Page 16 Friday, March 4, 2005 9:09 AM 4-IN-ONE REMOTE POWERED BY KAMELEON up this key for a cable box or satellite receiver/ PVR MAIN MENU PVR combo device. After cable box or satellite receiver programming, use these keys to control all common features, such as media transport functions. DVD MAIN MENU Pressing VCR displays the PVR Main Menu screen, if you have set up this key for a DVR/ PVR. After device programming, use these keys to control all your DVD playe
Résumé du contenu de la page N° 17
RS 4in1 Kam User Manual.fm Page 17 Friday, March 4, 2005 9:09 AM OWNER’S MANUAL control all your TV’s common features, such TV/VCR MAIN MENU as the VCR or DVD component’s transport functions. VCR MAIN MENU Pressing TV displays the TV Main Menu screen if you have set up this key for a TV/ Pressing VCR displays the VCR Main Menu VCR Combo device. After device screen. After device programming, use these programming, use these keys to control all keys to control your VCR’s transport features
Résumé du contenu de la page N° 18
RS 4in1 Kam User Manual.fm Page 18 Friday, March 4, 2005 9:09 AM 4-IN-ONE REMOTE POWERED BY KAMELEON • Keep the remote away from dust and reasonable protection against harmful dirt. interference in a residential installation. This equipment generates, uses, and can radiate • Wipe the remote with a damp cloth to radio frequency energy and if not installed keep it looking new. and used in accordance with the instructions, • Modifying or tampering with internal may cause harmful interfere
Résumé du contenu de la page N° 19
RS 4in1 Kam User Manual.fm Page 19 Friday, March 4, 2005 9:09 AM OWNER’S MANUAL from RadioShack company-owned stores and All replaced parts and products, and authorized RadioShack franchisees and products on which a refund is made, become dealers. the property of RadioShack. New or reconditioned parts and products may be EXCEPT AS PROVIDED HEREIN, used in the performance of warranty service. RadioShack MAKES NO EXPRESS Repaired or replaced parts and products are WARRANTIES AND ANY IMP
Résumé du contenu de la page N° 20
RS 4in1 Kam User Manual.fm Page 20 Friday, March 4, 2005 9:09 AM 4-IN-ONE REMOTE POWERED BY KAMELEON ÍNDICE DE MATERIAS Introducción . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Manufacturer’s Codes (Códigos del Fabricante) . . . . 43 Cómo Funciona Kameleon™ . . . . . . . . . . . . . . . . . . . 21 Códigos de Configuración para Cajas/Convertidores Instalación de las Baterías . . . . . . . . . . . . . . . . . . . . 21 de Cable . . . . . . . . . . . . . . . . . . . . . .
