Résumé du contenu de la page N° 1
SRU6080
Owner’s Manual
Résumé du contenu de la page N° 2
Table of Contents Introduction Congratulations on your purchase of Philips Universal Introduction .......................................................... 3 Remote Control. Philips Universal Remotes let you replace a Button Functions ................................................... 4 broken or lost remote or combine more than one remote into DVD/SAT Functions ........................................ 6 one. In addition, this remote is equipped with a command VCR/DVD Punch-Through Feature ...
Résumé du contenu de la page N° 3
Button Functions, cont. Button Functions 1. Liquid Crystal Display (LCD): Helps with setup and displays the Mode the remote is in, and time, etc. 2. TV, VCR, DVD, etc.: Selects product to be operated. 1. 31. 3. GUIDE: Displays on-screen program or channel guides. 4. +100: Used for channels greater than 100. 2. 30. (-): Used for digital channels, e.g. 2-3. 5. MENU: Brings up the DVD disc Menu screen - use with the UP, DOWN, LEFT & RIGHT navigation buttons. 3. 29. 6. OK/SELECT: Selects menu items
Résumé du contenu de la page N° 4
Button Functions, cont. Button Functions, cont. DVD Functions (labeled in Blue) Tivo/Replay Functions (labeled in Yellow) TiVo (code is 0738) SCAN+ and SCAN- buttons control the speed of Fast Forward and Reverse Playback respectively. CHAPTER+ and CHAPTER- buttons respectively locate T.CENTRAL - the TiVo button - for TiVo Central. the succeeding or preceding Chapters or Tracks on a disc. GUIDE - TiVo Live Guide - the TiVo Program Guide. SUBTITLE ON/OFF button turns the subtitles on or off. INFO
Résumé du contenu de la page N° 5
Setup Setup, cont. The SETUP button is used for programming the remote and Battery Installation accessing any additional features - e.g. Shifted functions, 1. On the back of the remote, push down on see below. To enter setup mode, press and hold the SETUP the tab and lift the cover off. button until “CODE SETUP” appears in the display. The 2. Match the batteries to the + and - marks “SET” symbol will always be shown when the remote is in inside the battery case, then insert 2 AAA Setup. Succ
Résumé du contenu de la page N° 6
Code Entry Code Entry, cont. Code Setup Options: Pressing OK at the CODE SETUP screen 8. Press and release OK to confirm selection. SEARCH presents 3 options for programming a Mode with codes. These KEY? is displayed. are ENTER CODES, (lets you enter a 4 digit code directly from 9. Press the Channel Up button (or POWER, or PLAY for the printed code list) SEARCH CODES, (lets you search VCRs/DVDs) repeatedly (up to 300 times) until the through the codes stored in the remote to find the correct one
Résumé du contenu de la page N° 7
Code Identification Feature Setup, cont. If the required Code is accidentally passed then press the System Setup Options Channel Down button to backtrack through the Library. Press Channel Up (or Power or Play) to change direction Pressing OK at the SYSTEM SETUP screen accesses the forward again. System Setup Options for Volume Punch-Through control Setup, Time Setup, Date Setup, Backlight Setup and System 11. Press and release OK to install the Code. SUCCESS is Reset. displayed and the remote r
Résumé du contenu de la page N° 8
Setup, cont. Setup, cont. Setting any Mode to use its own Volume/Mute Control Setting the Time of Day (TIME SETUP) (MODE VOL. SET) To set the Time of day for normal LCD time display. This sets any Mode to use only its own Volume/Mute control, i.e. Volume/Mute punch-through is disabled for 1. Press and hold the SETUP button until CODE SETUP is this Mode. Note - If your chosen Mode has no Volume/ displayed (takes about 3 seconds), then release the Mute functions of its own then the Volume/Mute bu
Résumé du contenu de la page N° 9
Setup, cont. Setup, cont. Setting the Backlighting On time (BACKLIGHT SETUP) Timer Setup To set the length of time the Backlighting remains on after Pressing OK at TIMER SETUP accesses the available you stop pressing buttons. The Backlight button toggles Timer Options. These are a TV Sleep Timer and 4 Timers backlighting off and on. that can send a sequence of up to 3 key commands at the preset time. 1. Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then
Résumé du contenu de la page N° 10
Setup, cont. Setup, cont. Setting and Clearing Timers (TIMER SETUP) To clear a Timer (“Timer Bell” in normal display) The remote can be programmed with up to 4 Timers (Timer 1. Press and hold the SETUP button until CODE SETUP is 1, 2, 3 & 4). Each Timer can be assigned up to 4 keys (4 if displayed (takes about 3 seconds), then release the SETUP Macros enabled, 2 if Macros disabled) to activate at the set button. time. The first key must always be a Mode key. 2. Press the down navigation button
Résumé du contenu de la page N° 11
Code Learning Tips On Learning, cont. m. If learning the first or second buttons for a Mode Tips On Learning results in continuous errors then try the following: i. End the Learn session by pressing the QUIT button. You can only learn one device type under any one Mode ii. Clear out the learned commands for that Mode. button e.g. only learn TV codes under the TV Mode, VCR iii. Check the IR transmitters are correctly aligned between codes under the VCR Mode, etc. If you are trying to learn the tw
Résumé du contenu de la page N° 12
Learning Commands Clearing Commands 1. Press and hold the SETUP button until CODE SETUP is To Clear all Learned Commands under a mode displayed (takes about 3 seconds), then release the SETUP button. Clearing learned commands is helpful if, for example, you 2. Press the down navigation button until LEARN SETUP is replace your CD player with another brand or model. If displayed. Press and release OK. you had learned a feature from your old CD player’s 3. MODE LEARN is displayed. Press and relea
Résumé du contenu de la page N° 13
Macros Macros, cont. The MACRO button, in conjunction with digits 1 through 8, In normal operation, to activate the Macro press and lets you to program and store up to 8 sequences of IR release the MACRO button followed (within 20 seconds) Commands (button-presses) of your choice. One press of by the digit button 1 thru 8. MACRO X is displayed while the respective Macro digit button results in that sequence the Macro sequence is being carried out then remote of IR commands being sent. Any sequ
Résumé du contenu de la page N° 14
Troubleshooting Limited Lifetime Warranty The manufacturer warrants that this product shall be free Remote does not operate your product. from defects in material, workmanship and assembly, under normal use, in accordance with the specifications and • Press the mode button of the product you want to warnings, for as long as you own this product. This control. warranty extends only to the original purchaser of the • Program the remote with a new code. product, and is nontransferable. Defective pr
Résumé du contenu de la page N° 15
Contenido Introducción Introducción ......................................................................29 Le felicitamos por haber comprado un mando a Funciones de los botones .................................................30 distancia universal de Philips. Los mandos universales Funciones de DVD/SAT ..............................................32 de Philips le permiten sustituir cualquier mando Característica de traspaso de control de vídeo/DVD ........32 averiado o que haya perdido, o co
Résumé du contenu de la page N° 16
Funciones de los botonescontinuación) Funciones de los botones 1. Pantalla de cristal líquido (LCD): ayuda con el proceso de configuración y muestra el modo en el que se encuentra el mando, así como la hora, etc. 2. TV, VCR, DVD, etc.: selecciona el producto que se va a 1. 31. utilizar. 3. GUIDE: muestra guías de canales o de programación en pantalla. 2. 30. 4. +100: se utiliza para canales superiores a 100. (-): se utiliza para canales digitales, por ejemplo, 2-3. 5. MENU muestra la pantalla de
Résumé du contenu de la page N° 17
Funciones de los botonescontinuación) Funciones de los botonescontinuación) Funciones del DVD (en azul) Funciones de TiVo/Replay (en amarillo) Los botones SCAN+ y SCAN- controlan la velocidad de avance TiVo (el código es 0738) rápido y de reproducción inversa respectivamente. T-CENTRAL: el botón de TiVo (para TiVo Central). Los botones CHAPTER+ y CHAPTER- localizan respectivamente GUIDE: guía en directo de TiVo (la guía de programación de los capítulos o pistas siguientes o anteriores de un disc
Résumé du contenu de la page N° 18
Configuración Configuración (continuación) El botón SETUP se emplea para programar el mando y acceder a Cómo colocar las pilas cualquier función adicional, por ejemplo, funciones desplazadas. 1. En la parte posterior del mando, presione Siga leyendo. Para acceder al modo de configuración, mantenga sobre la pestaña y quite la cubierta. pulsado el botón SETUP hasta que aparezca “CODE SETUP” en la 2. Coloque las pilas de acuerdo con las pantalla. Cuando el mando esté en el modo de configuración,
Résumé du contenu de la page N° 19
Introducción de códigos Introducción de códigos (continuación) Opciones de Code Setup: al pulsar OK en la pantalla CODE 7. Utilizando los botones hacia arriba o hacia abajo, SETUP aparecen 3 opciones para programar un modo con seleccione el tipo de dispositivo que se va a programar códigos. Se trata de las siguientes: ENTER CODES (permite (TV, VCR, DVD, etc.). Nota: En el modo de televisor, introducir un código de 4 dígitos directamente desde la lista sólo se podrá seleccionar un televisor como
Résumé du contenu de la page N° 20
Code Identification Feature Configuración (continuación) programe en el modo DVD, mantenga pulsado el botón de modo 8. Pulse y suelte OK para confirmar la selección. DVD durante más de un segundo para enviar el comando del Aparecerá “BRAND KEY?”. botón DVD. Para enviar el comando del botón VCR, pulse y 9. Pulse y suelte el botón numérico (1-8) correspondiente suelte rápidamente el botón SETUP y, a continuación, pulse y al fabricante que desee. (Consulte la lista de códigos en suelte el botón de
