Instruction d'utilisation Logitech IRRF7243U

Résumé du contenu de la page N° 1

Automation@Home
www.automation-at-home.com

This manual will show you how to setup Logitech Harmony Universal Remote to control X10
home automation system .

Hardware Requirement :
1) Logitech Harmony Universal Remote e.g. Logitech Harmony 880
2) Marmitek IR \ RF Transceiver + Mini Controller , model number : IRRF7243U
3) Several X10 device e.g. X10-2026UK X10 Plug-in Module , X10-2222 Single Button Dimmer Wall
Switch …etc

In following example :
We have several X10 device and alr

Résumé du contenu de la page N° 2

Automation@Home www.automation-at-home.com 2) Click “Add Device” button. 3) Select “Home Automation” then click “NEXT >” 4) Select “Light Controller” then click “NEXT >” Page 2

Résumé du contenu de la page N° 3

Automation@Home www.automation-at-home.com 5) Select “Marmitek” then click “NEXT > “ 6) Input “ IR7243 ” then click “NEXT >” 7) Reconfirm the data is correct then click “NEXT >” Page 3

Résumé du contenu de la page N° 4

Automation@Home www.automation-at-home.com 8) After you add the Light Controller it will appear on the “Devices” page. Then click “Settings” in “Light Controller Section” 9) Select “Change the behavior of buttons” then click “NEXT >” 10) Assign the X10 command to specific button , e.g. Mute Button – All Lights Off Volume Up Button – Bright Volume Down Button – Dim Up Arrow Button – On Down Arrow Button – Off Prev. Button – All Lights On Page 4

Résumé du contenu de la page N° 5

Automation@Home www.automation-at-home.com 11) Assign the on-screen button label , in this example : AllLightOff – AllLightOff AllLightOn – AllLightOn Bedroom – Light 1 LivingRoom1 – Light 3 LivingRoom2 – Light 4 Toilet – Light 5 Kitchen – Light 6 Spotlight 1 – Light 9 Spotlight 2 – Light 10 After that , click “ DONE ” 12) Click “DONE” for finish the setting 13) Click “Update Remote” to upload the setting into the Harmony Remote. Page 5