Résumé du contenu de la page N° 1
SAT
Remote Control
Remote Control
User Guide
User Guide
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Table of Contents Quick Setup Confirm Your Receiver Model ...............................................S-1 Install Your Selected Key .......................................................S-2 Insert the Batteries.................................................................S-2 Making the Remote Work with Your Receiver .......................S-3 Program the Remote to Control Your TV...............................S-4 Programming the Recover Button for TV2 Operation............S-5 Placing Your
Résumé du contenu de la page N° 4
Quick Setup then Select the Right Key Confirm Your Receiver Model 1 Remote keys are included in this replacement remote kit. Keys have two sides. If your Look on both sides to find receiver the right key for your remote. ® ® Duo ViP 222 & DuoDVR™ ViP 622 looks like one of IR these... ® DuoDVR™ ViP 722 OR Use the key that UHF Pro looks like this DISH JVC IRR The remote functions as needed in regards to watching your satellite television and VCR. It does not rewind or fast forward while wat
Résumé du contenu de la page N° 5
Battery Battery Battery Battery Quick Setup 2 Install Your Selected Key Note: If you are using the blue TV2 key that comes already installed in your remote, skip this step and proceed with the next step (Insert the Batteries). 1 2 3 A B 1 1 Separate the key Insert face up from the remote Pull the the key you by inserting your selected on remote thumbnail or a coin battery the previous in the crease. cover off. page. Remove the key by grasping at the bottom. 3 Insert the Batteries 1 2 Ins
Résumé du contenu de la page N° 6
Quick Setup 4 Making the Remote Work With Your Receiver 1 If you installed one of these keys, If you installed this continue with step 2 on this page. key, go to page 14 inside this guide. UHF Pro Symbol Green (not black) 2 3 If you installed a UHF key, make sure the UHF antenna is installed on the back of the receiver. Turn your receiver and TV on, and press SYSTEM INFO on the 4 front of the receiver. 5 RECORD Press RECORD on Confirm that you your remote. The remote see the System addre
Résumé du contenu de la page N° 7
Quick Setup Program the Remote to Control Your TV 1 2 Press & hold the TV Mode button Turn your until all Mode TV on. buttons light up. 4 3 Press the UP ARROW on the remote repeatedly Press (about 1 press per second) POWER. until your TV turns off. 5 6 Press Press the POWER POUND. button to turn the TV on The TV Mode button and try other buttons flashes three times. to make sure the code works. If you want to try another code, start over from step 1. S-4
Résumé du contenu de la page N° 8
Quick Setup Programming the Recover Button for TV2 Operation For TV2 Remote Controls on ™ ™ DuoDVR 522, DuoDVR 625, ® ™ ® Duo ViP 222, DuoDVR ViP 622 DVR, ™ ® and DuoDVR ViP 722 DVR Receivers Programming your RECOVER button allows you to easily regain satellite programming if you accidentally change TV channels or inputs. 1 2 3 Press & hold the Press TV Mode button STAR. until all Mode buttons light up. Enter the channel number you tune 4 your TV to when you watch satellite programming. Press PO
Résumé du contenu de la page N° 9
Quick Setup/Operation Placing Your Remote in Limited Mode Limited Mode locks out all the TV mode operations except for TV power, Mute, and Volume. This prevents you from accidentally tuning away from satellite programming. 1 2 3 PAGE Press & hold the Press TV Mode button Press the POUND. until all Mode PAGE UP buttons light up. button. To take the remote out of Limited Mode, use the PAGE DOWN button instead of the PAGE UP button in step 2. If You Lose Your Picture (How to Use the RECOVER Button)
Résumé du contenu de la page N° 10
Operation Remote Operation SAT Mode To use the features described in this section, make SAT sure you are in SAT mode by pressing the SAT Mode button. Note: Some features may not be available depending on your receiver model. Volume & Mute Buttons Control TV volume Programming required (see S-4) Receiver Power Press this Page Buttons & TV Power button for Page up/down in Top button turns the SAT Mode menus receiver on and off Bottom button turns Program Guide the TV on and off Programming require
Résumé du contenu de la page N° 11
Operation Remote Operation TV Mode To use the features described in this section, make TV TV sure you are in TV mode by pressing the TV Mode button. Remote programming is required. See S-4 for instructions. Press this TV Power button for Top & bottom TV Mode TV/Video button Switch between Turn TV on/off TV inputs TV (not available on all TVs) Volume Control TV TV Menu volume Access menu features available on some TVs Up/Down Arrow Buttons Mute Channel up/down Turn TV volume on TV on or off Recal
Résumé du contenu de la page N° 12
Operation Remote Operation VCR Mode VCR To use the features described in this section, make sure you are in VCR mode by pressing the VCR Mode button. You can use this mode to operate your DVD player instead of a VCR. Remote programming is required. See page 2 for instructions. Press this button for VCR Mode VCR/DVD Power & TV Power Top button turns VCR the VCR/DVD player on and off Bottom button turns the TV on and off TV/Video Up/Down Arrow Switch VCR between Buttons its TV & VCR mode Channel u
Résumé du contenu de la page N° 13
REMOTE CONTROL OVERVIEW Use this full-function remote to control a variety of DISH Network receivers. Also, you can program the remote to control most of the popular brands of audio/video equipment like a TV, VCR, DVD player, or a second DISH Network satellite receiver. See Programming for Other Equipment on page 2. Note: This remote control may have features not used by your receiver. USING THE GUIDE This guide makes it easy to set up and use your remote control. By now you’ve noticed th
Résumé du contenu de la page N° 14
If you program the remote to control other equipment, refer to the following for remote control operation instructions: • TVs, page S-8 (at the beginning of this guide). • VCRs and DVD players, page S-9. • DISH Network satellite receivers, page S-7. • Stereo equipment uses only these buttons: SELECT (to change inputs), MUTE, VOLUME, and POWER. HOW THE REMOTE COMMUNICATES Depending on how the remote is set up, the remote control may use UHF radio signals, IR signals, or both to control the re
Résumé du contenu de la page N° 15
code 887, and then repeat the instructions for the VCR using code 797. Put the remote in TV mode to use the TV or VCR mode to use the VCR. LIMITED MODE You can program your remote control in Limited Mode to keep from accidentally changing the channel on your TV or VCR. When Limited Mode is enabled, you cannot select TV mode. If you press the TV button while TV mode is programmed in Limited Mode, the TV button flashes and the SAT button lights, telling you cannot switch to TV mode. The rem
Résumé du contenu de la page N° 16
REMOVING FIXED CHANNEL MODE FOR TV AND/OR VCR 1 Press and hold the TV or VCR mode button until all four mode lights illuminate. 2 Press the STAR (*) key followed by two zeros (*00). 3 Press the POUND (#) key. The TV or VCR mode button flashes three times. PROGRAMMING USING EQUIPMENT CODE TABLES You can set up the remote to control other equipment using the equipment code tables listed on page 16 and the modes as shown on page 1. To control a receiver in AUX mode, see page 8. Instructions Add
Résumé du contenu de la page N° 17
Instructions Additional Information 6 If you want to program See Limited Mode on page 3 for Limited Mode, press 1. more information. If not, skip to step 7. 7 Press POUND (#). If you entered the code correctly, the mode button flashes three times. 8 Press POWER to turn off If the code works, the the equipment. If the equipment should turn off. equipment does not turn off, go to step 10. 9 Turn the equipment back For example, sometimes on and try some other POWER works when other buttons t
Résumé du contenu de la page N° 18
SCANNING FOR EQUIPMENT CODES Instructions Additional Information 1 Turn the equipment on. Use the equipment’s front panel buttons or its remote control. 2 Press and hold the mode For example, hold the TV mode button until all the other button for a TV until all of the mode buttons light up, and other mode buttons light. When then let go of the button. you let go, TV mode button The mode button flashes. flashes. 3 For AUX mode only. Press This step is for programming 0 for a second TV, 1 fo
Résumé du contenu de la page N° 19
Instructions Additional Information 7 Turn the equipment back Press POWER to turn the on and try some other equipment back on. Try some buttons to make sure they other buttons to make sure they work. work. Sometimes POWER works when other buttons don’t. 8 If necessary, repeat this You may need to repeat the scan procedure until you’ve tried to find the best code for your all the codes. equipment. 9 Once you find a code that See page S-6, Placing Your works, consider using Remote in Limit
Résumé du contenu de la page N° 20
Control Amplifier Volume Control TV Volume 3 Press the plus (+) side of 3 Press the plus (+) side of the VOLUME button. the VOLUME button. 4 Press the 0 number button. 4 Press the 0 number button. 5 Press the POUND (#) 5 Press the POUND (#) button. button. The AUX mode button The TV mode button flashes three times. flashes three times. MAKE SURE THE REMOTE MAKE SURE THE REMOTE CONTROLS THE AMPLIFIER’S CONTROLS THE TV’S VOLUME: VOLUME: 6 Press the SAT mode 6 Press the SAT mode button. butto
