Instruction d'utilisation JL Audio Stealthbox SB-J-GRCHER/10W1v2/BK

Résumé du contenu de la page N° 1

SB-J-GRCHER/10W1 STEALTHBOX™
Fits 1993 - 1998
® ®
Jeep Grand Cherokee
Installation Guide:
This Stealthbox is designed to mount in the right-rear corner of the hatch area and is a product which
requires professional installation skills and tools. We highly recommend that an authorized
JL Audio dealer performs the installation.
Please read this installation guide thoroughly before beginning the project. It will guide you step by
step through the process. Some steps may requ

Résumé du contenu de la page N° 2

STEP 5: Thread the supplied bolts into the inserts molded into the Stealthbox and tighten fully. STEP 6: Place the Stealthbox in its mounting position. Make sure that it is pushed snugly against the vehicle's side panel. Once positioned, press down firmly on the Stealthbox to make impres- sions on the sheet wax squares with the mounting bolts. STEP 7: Remove the enclosure gently. There should be a clear mark on each wax square which you will use as locators for drilling the mounting holes. ST

Résumé du contenu de la page N° 3

STEP 13: While one person holds the Stealthbox in place inside the truck, bolt the enclosure into place from underneath using the supplied hardware. Before tightening the bolts, apply a bead of silicone sealant between the flat washer and the vehicle's floor pan. Once this is done, tighten the bolts evenly. See diagram below. Threaded Insert Enclosure Wall (fiberglass) Molded into Enclosure Supplied Hardware: (2) 4" Sheet Wax Squares Factory Carpet and Padding (2) 3/8" x 1 1/4" Bolts (2)

Résumé du contenu de la page N° 4